FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aci_bat_err.c @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Handle cme and cms errors for BAT clients +----------------------------------------------------------------------------- */ #include "aci_all.h" #include "aci_cmh.h" /* so see T_ACI_ERR_CLASS and other */ #include "psa.h" #include "cmh.h" /* extern definition of aciErrDesc */ #include "aci_bat_cmh.h" #include "aci_bat.h" #include "aci_bat_err.h" #include "psa_psi.h" /* * the [stq]AT_xxx function will set the global variable aciErrDesc with ACI_ERR_DESC. * here we read it and cast it to the BAT value defined in * T_BAT_plus_cme_error_error and T_BAT_plus_cms_error_err. * Currently (03.March 2005) the error values of ACI and BAT are identical, * but can cause a lot of problems when there is a mismatch! * There should be used only the values of p_bat.h defined in bat.sap ! * * on ACI level there are CME, CMS, CEER and EXT error values. * CEER errors are/is only one in * cmh_ccf.c:2159: ACI_ERR_DESC( ACI_ERR_CLASS_Ceer, CAUSE_MAKE(DEFBY_STD, * and must be requested with the * T_BAT_cmd_send send.ctrl_params = BAT_CMD_SET_PLUS_CEER by the apllication. * BAT returns with a T_BAT_res_set_plus_ceer structure. * */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : aci_bat_err | +--------------------------------------------------------------------+ PURPOSE : central BAT error function called by aci_bat_wrapper only. it evaluates the global varaible aciErrDesc, which has been set with the appropriate error value of the just ran ACI function. */ GLOBAL void aci_bat_err (T_ACI_DTI_PRC_PSI *src_infos_psi) { T_ACI_ERR_CLASS err_class; T_BAT_res_plus_cme_error cme_data; T_BAT_res_plus_cms_error cms_data; T_BAT_res_plus_ext_error ext_data; T_BAT_cmd_response resp; if (ACI_BAT_VALID_ERR_DESC()) { err_class = (T_ACI_ERR_CLASS)ACI_BAT_GET_ERR_CLASS(); switch (err_class) { case (ACI_ERR_CLASS_Cme): { T_BAT_plus_cme_error_error bat_err; T_ACI_CME_ERR err = (T_ACI_CME_ERR)ACI_BAT_GET_ERR_VALUE(); ACI_BAT_RESET_ERR_DESC(); bat_err = (T_BAT_plus_cme_error_error)err; resp.ctrl_response = BAT_RES_PLUS_CME_ERROR; resp.response.ptr_plus_cme_error=&cme_data; resp.response.ptr_plus_cme_error->error = bat_err; TRACE_EVENT_P1("aci_bat_err(): CME ERROR: %d", bat_err); break; } case (ACI_ERR_CLASS_Cms): { T_BAT_plus_cms_error_err bat_err; T_ACI_CMS_ERR err = (T_ACI_CMS_ERR)ACI_BAT_GET_ERR_VALUE(); ACI_BAT_RESET_ERR_DESC(); bat_err = (T_BAT_plus_cms_error_err)err; resp.ctrl_response = BAT_RES_PLUS_CMS_ERROR; resp.response.ptr_plus_cms_error=&cms_data; resp.response.ptr_plus_cms_error->err = bat_err; TRACE_EVENT_P1("aci_bat_err(): CMS ERROR: %d", bat_err); break; } case (ACI_ERR_CLASS_Ext): { T_BAT_plus_ext_error_err bat_err; T_ACI_EXT_ERR err = (T_ACI_EXT_ERR)ACI_BAT_GET_ERR_VALUE(); ACI_BAT_RESET_ERR_DESC(); bat_err = (T_BAT_plus_ext_error_err)err; resp.ctrl_response = BAT_RES_PLUS_EXT_ERROR; resp.response.ptr_plus_ext_error=&ext_data; resp.response.ptr_plus_ext_error->err = bat_err; TRACE_EVENT_P1("aci_bat_err(): EXT ERROR: %d", bat_err); break; } case (ACI_ERR_CLASS_NotPresent): default: /* this should trigger to request the CEER errors by the application */ resp.ctrl_response = BAT_RES_PLUS_CME_ERROR; resp.response.ptr_plus_cms_error=&cms_data; resp.response.ptr_plus_cms_error->err=(T_BAT_plus_cms_error_err)BAT_CME_ERROR_UNKNOWN; TRACE_EVENT("aci_bat_err(): UNKNOWN ERROR"); break; } } else { TRACE_EVENT("aci_bat_err(): WARNING, no error value set!"); resp.ctrl_response = BAT_RES_PLUS_CME_ERROR; resp.response.ptr_plus_cme_error=&cme_data; resp.response.ptr_plus_cme_error->error=BAT_CME_ERROR_UNKNOWN; } aci_bat_send(src_infos_psi,&resp); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCEER | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCEER (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; USHORT cause; TRACE_FUNCTION ("sBAT_PlusCEER()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusCEER((T_ACI_CMD_SRC)src_infos_psi->srcId,&cause); /* * If the query completes - and it should - send the response now. */ if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_set_plus_ceer ceer_data; resp.ctrl_response=BAT_RES_SET_PLUS_CEER; resp.response.ptr_set_plus_ceer=&ceer_data; ceer_data.definedby=(T_BAT_plus_ceer_definedby)GET_CAUSE_DEFBY(cause); ceer_data.originatingside=(T_BAT_plus_ceer_originatingside)GET_CAUSE_ORIGSIDE(cause); ceer_data.originatingentity=(T_BAT_plus_ceer_originatingentity)GET_CAUSE_ORIGIN_ENTITY(cause); ceer_data.causevalue=(U8)GET_CAUSE_VALUE(cause); aci_bat_send(src_infos_psi,&resp); } return(ret); }