FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/ati_omcompat.c @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* * This module implements those AT commands that were originally invented * by Openmoko and have been retained in FreeCalypso. */ #ifndef ATI_OMCOMPAT_C #define ATI_OMCOMPAT_C #include "aci_all.h" #include <ctype.h> #include <string.h> #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_io.h" #include "aci_cmd.h" #include "l4_tim.h" #include "line_edit.h" #include "aci_lst.h" #include "pcm.h" #include "audio.h" #include "aci.h" #include "rx.h" #include "pwr.h" #include "l4_tim.h" #ifdef GPRS #ifdef DTI #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #endif /* DTI */ #include "gaci.h" #include "gaci_cmh.h" #include "gaci_cmd.h" #endif /* GPRS */ #include "aci_mem.h" #include "aci_prs.h" #include "ati_int.h" #ifndef _SIMULATION_ #include "ffs/ffs.h" #endif #ifdef FF_ATI_BAT #include "typedefs.h" #include "gdd.h" #include "bat.h" #include "ati_bat.h" #endif /*FF_ATI_BAT*/ #include "audio/audio_api.h" #include "abb.h" #include "dar/dar_api.h" EXTERN void alr_get_band_of_serving_cell (char *strbuf); /* * PURPOSE : @ST command (Configure the sidetone level) */ GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId) { char tmp[8]={0}; INT8 gain = -26; TRACE_FUNCTION("atAtST()"); /* * input functionality */ cl = parse(cl,"s", (LONG)8, tmp); gain = atoi(tmp); if ( cl ) { if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 ) { Side_Tone_Write(gain); return (ATI_CMPL); } else { cmdCmsError(CMS_ERR_OpNotAllowed); return (ATI_FAIL); } } } GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId) { char *me="+ST: "; INT8 ST1; TRACE_FUNCTION("queatAtST()"); ST1 = Side_Tone_Read(); sprintf(g_sa,"%s%d",me,ST1); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } /* * PURPOSE : @POFF command (Power Off GSM Modem) */ GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtPOFF"); sprintf(g_sa,"%s","OK"); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); ABB_Power_Off(); return (ATI_CMPL); } /* * PURPOSE : @RST command (Reset GSM Modem) */ GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtRST"); dar_reset_system(); return (ATI_CMPL); } /* * PURPOSE : @BAND command (Get RF band) */ GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtBAND"); alr_get_band_of_serving_cell(g_sa); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } #endif /* ATI_OMCOMPAT_C */