view src/g23m-aci/aci/cmh_gmmq.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the query functions related to the
|             protocol stack adapter for GPRS mobility management ( GMM ).
+----------------------------------------------------------------------------- 
*/ 

#if defined (GPRS) && defined (DTI)

#ifndef CMH_GMMQ_C
#define CMH_GMMQ_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "dti_conn_mng.h"

#include "pcm.h"

#include "gaci.h"
#include "gaci_cmh.h"
#include "psa.h"
#include "psa_gmm.h"

#include "cmh.h"
#include "cmh_gmm.h"

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PlusCGATT            |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGATT? AT
            command which returns the current state of GPRS attachment.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGATT  ( T_ACI_CMD_SRC srcId, T_CGATT_STATE *state )
{
  TRACE_FUNCTION ("qAT_PlusCGATT()");

  if ( !cmh_IsVldCmdSrc (srcId) )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  switch ( cmhGMM_Get_state() )
  {
    case AS_ATTACHED:
    case AS_SUSPENTED:
      *state = CGATT_STATE_ATTACHED;
      break;
    case AS_INVALID_STATE:
    case AS_MOBILE_OFF:
    case AS_DETACHED:
    case AS_ATTACHING:
    case AS_DETACHING:
    default:
      *state = CGATT_STATE_DETACHED;
      break;
   }

   return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PlusCGCLASS          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGCLASS? AT
            command which returns current GACI mobile class.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGCLASS  ( T_ACI_CMD_SRC srcId, T_CGCLASS_CLASS *m_class )
{
   TRACE_FUNCTION ("qAT_PlusCGCLASS()");

/*
 *-------------------------------------------------------------------
 * check command source - should be Serial link ?
 *-------------------------------------------------------------------
 */
   if ( !cmh_IsVldCmdSrc (srcId) ) {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
   }

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  switch ( gmmShrdPrm.mobile_class )
  {
    case GMMREG_CLASS_A:
      *m_class = CGCLASS_CLASS_A;     /* mobile class A  (highest) */
      break;
    case GMMREG_CLASS_B:
    case GMMREG_CLASS_BC:
    case GMMREG_CLASS_BG:
      *m_class = CGCLASS_CLASS_B;     /* mobile class B */
      break;
    case GMMREG_CLASS_CG:
      *m_class = CGCLASS_CLASS_CG;    /* mobile class CG (GPRS only mode) */
      break;
    case GMMREG_CLASS_CC:
      *m_class = CGCLASS_CLASS_CC;    /* mobile class CC (circuit switched only mode - lowest) */
      break;
    default: /*bad user command */
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return AT_FAIL;
  }

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PercentCGAATT        |
+--------------------------------------------------------------------+

  PURPOSE : This command get the mode of automatic attach / detach.
*/

GLOBAL T_ACI_RETURN qAT_PercentCGAATT  ( T_ACI_CMD_SRC srcId, T_CGAATT_ATTACH_MODE *att_m, T_CGAATT_DETACH_MODE *det_m )

{
  TRACE_FUNCTION ("qAT_PercentCGAATT()");  

  *att_m = automatic_attach_mode;
  *det_m = automatic_detach_mode;

  return( AT_CMPL );   
}

GLOBAL T_ACI_RETURN qAT_PlusCGREG( T_ACI_CMD_SRC srcId, T_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PlusCGREG()");

  *stat = gmmShrdPrm.cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

GLOBAL T_ACI_RETURN qAT_PercentCGREG   ( T_ACI_CMD_SRC srcId, T_P_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PercentCGREG()");

  *stat = gmmShrdPrm.p_cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PercentCGCLASS       |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CGCLASS? AT
            command which returns current GPRS mobile class.
*/
GLOBAL T_ACI_RETURN qAT_PercentCGCLASS  ( T_ACI_CMD_SRC srcId, T_PERCENT_CGCLASS *m_class, T_PERCENT_CGCLASS *currentClass )
{
   TRACE_FUNCTION ("qAT_PercentCGCLASS()");

  *m_class = *currentClass = gaciMobileClass.current;
  if( PERCENT_CGCLASS_BX EQ gaciMobileClass.current)
  {
    switch ( gmmShrdPrm.mobile_class )
    {
      case GMMREG_CLASS_BC:
        *currentClass = PERCENT_CGCLASS_BC;
        break;
      case GMMREG_CLASS_BG:
        *currentClass = PERCENT_CGCLASS_BG;
        break;
    }
  }

  return( AT_CMPL );
}
#endif  /* GPRS */
/*==== EOF ========================================================*/