view src/g23m-aci/aci/cmh_l2r.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_L2R
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler of Layer 2 Relay
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_L2R_H
#define CMH_L2R_H

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/

typedef struct entL2rStatus          /* entity status */
{
  T_ACI_CMD_SRC  entOwn;          /* entity owner */
  T_ACI_AT_CMD   curCmd;          /* current command processing */
  BOOL           isTempDisconnected;            
} T_L2R_ENT_STAT;

/*==== PROTOTYPES =================================================*/

GLOBAL void cmhL2R_TRA_Enabled ( void );
GLOBAL void cmhL2R_Deactivated ( void );
GLOBAL void cmhTRA_Deactivated ( void );

#ifdef DTI
GLOBAL void cmhL2R_TRA_Disabled ( T_DTI_ENTITY_ID entityId);
#endif

GLOBAL void cmhL2R_Failure ( void );

GLOBAL SHORT        cmhL2R_GetCompDir ( void );
GLOBAL UBYTE        cmhL2R_SelCompDir ( T_L2R_CMD_PRM * pCmdPrm );
GLOBAL UBYTE        cmhL2R_SelChnRate ( void );
GLOBAL T_ACI_RETURN cmhL2R_Activate   ( T_ACI_CMD_SRC srcId,
                                        T_ACI_AT_CMD cmdId,
                                        SHORT cId );
GLOBAL T_ACI_RETURN cmhL2R_Deactivate ( void );
GLOBAL T_ACI_RETURN cmhTRA_Deactivate ( void );

#ifdef DTI
GLOBAL void cmhCC_L2R_or_TRA_Activated ( T_DTI_ENTITY_ID activated_module, SHORT cId );
#endif /* DTI */
GLOBAL void cmhCC_L2R_or_TRA_Deactivated ( SHORT cId );

#ifdef DTI
GLOBAL BOOL TRA_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
GLOBAL BOOL L2R_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
#endif /* DTI */


GLOBAL T_ACI_RETURN cmhL2R_Enable     ( void );


/*==== EXPORT =====================================================*/
#ifdef CMH_L2RF_C

GLOBAL T_L2R_ENT_STAT l2rEntStat;

#else

EXTERN T_L2R_ENT_STAT l2rEntStat;

#endif /* CMH_L2RF_C */


#endif /* CMH_L2R_H */

/*==== EOF =======================================================*/