view src/g23m-aci/aci/cmh_mmq.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMQ
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the query functions related to the
|             protocol stack adapter for mobility management.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMQ_C
#define CMH_MMQ_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "pcm.h"
#include "psa.h"
#include "psa_mm.h"
#include "psa_util.h"
#include "cmh.h"
#include "cmh_mm.h"
#include "rx.h"
#ifdef TI_PS_OP_OPN_TAB_ROMBASED
#include "plmn_decoder.h"
#include "rom_tables.h"
#endif

#include "rtc.h"

#ifdef FF_TIMEZONE
#include "rv/rv_general.h"
#include "rtc/rtc_tz.h"
#endif

#ifdef GPRS
#include "gaci_cmh.h"
#include "psa_gmm.h"
#endif

#ifndef _SIMULATION_
/******************************/
/* just to get FFS !!!!       */
/* TEMPORARY until use of NVM */
#ifndef GPRS
#define DONT_LET_FFSH2_DEF_GPRS
#endif

#include "ffs/ffs.h"


/* check whether latter has defined GPRS !!! */
#ifdef DONT_LET_FFSH2_DEF_GPRS
#undef GPRS
#endif

#undef DONT_LET_FFSH2_DEF_GPRS
/***************************/
#endif /* _SIMULATION_ */


/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/
#if defined (GPRS) && defined (DTI)
EXTERN T_GMM_SHRD_PRM gmmShrdPrm;
#endif
EXTERN T_ONS_READ_STATE ONSReadStatus;
/*==== FUNCTIONS ==================================================*/

EXTERN BOOL cmhSIM_plmn_is_hplmn();

LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId,
                                          T_ACI_COPS_MOD * mode,
                                          T_ACI_COPS_FRMT * format,
                                          CHAR * oper,
                                          T_ACI_COPS_SVST * svrStatus);
#ifdef TI_PS_FF_AT_P_CMD_CTREG
EXTERN BOOL cl_shrd_get_treg_val(T_ACI_TREG *treg);
#endif /* TI_PS_FF_AT_P_CMD_CTREG */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PercentBAND             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %BAND? AT command
            which returns the current multiband configuration.

            <bandMode>: band switch mode.
            <bandType>: band selection.
*/

GLOBAL T_ACI_RETURN qAT_PercentBAND(T_ACI_CMD_SRC   srcId,
                                    T_ACI_BAND_MODE *bandMode,
                                    UBYTE           *bandType)
{
  UBYTE dummy;

  TRACE_FUNCTION ("qAT_PercentBAND()");

  /* check command source */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

  if( bandMode EQ NULL OR
      bandType EQ NULL )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  if(!cmhMM_getBandSettings( bandType, &dummy ))
  {
    *bandMode = BAND_MODE_Auto;
  }
  else
  {
    *bandMode = BAND_MODE_Manual;
  }

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCOPS             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +COPS? AT command
            which returns the current setting of mode, format and
            operator.

            <mode>:   registration mode.
            <format>: format of operator
            <oper>:   operator string
*/

GLOBAL T_ACI_RETURN qAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
                                   T_ACI_COPS_MOD * mode,
                                   T_ACI_COPS_FRMT * format,
                                   CHAR * oper )
{
  /* Implements Measure 127 */
  return (qat_plus_percent_COPS (srcId, mode, format, oper, NULL ) );

}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCOPS             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +COPS? AT command
            which returns the current setting of mode, format and
            operator.

            <mode>:   registration mode.
            <format>: format of operator
            <oper>:   operator string
*/

GLOBAL T_ACI_RETURN qAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
                                   T_ACI_COPS_MOD * mode,
                                   T_ACI_COPS_FRMT * format,
                                   T_ACI_COPS_SVST * svrStatus,
                                   CHAR * oper )
{
  /* Implements Measure 127 */
  return (qat_plus_percent_COPS (srcId, mode, format, oper, svrStatus ) );
}




/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCREG             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CREG? AT command
            which returns the current setting of registration status.

            <stat>:   registration status.
            <lac>:    current lac.
            <cid>:    current cell id.
*/

GLOBAL T_ACI_RETURN qAT_PlusCREG ( T_ACI_CMD_SRC    srcId,
                                   T_ACI_CREG_STAT *stat,
                                   USHORT          *lac,
                                   USHORT          *cid )
{

  TRACE_FUNCTION ("qAT_PlusCREG()");

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  *stat = mmShrdPrm.creg_status;
  *lac  = mmShrdPrm.lac;
  *cid  = mmShrdPrm.cid;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCREG          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CREG? AT command
            which returns the current setting of registration status.

            <stat>:     registration status.
            <lac>:      current lac.
            <cid>:      current cell id.
            <gprs_ind>: if GPRS is available or not
*/

GLOBAL T_ACI_RETURN qAT_PercentCREG ( T_ACI_CMD_SRC srcId, 
                                      T_ACI_CREG_STAT *stat, 
                                      USHORT *lac, 
                                      USHORT *cid, 
                                      T_ACI_P_CREG_GPRS_IND *gprs_ind,
                                      U8*           rt)
{

  TRACE_FUNCTION ("qAT_PercentCREG()");

  qAT_PlusCREG (srcId, stat, lac, cid);

#if defined (GPRS) AND defined (DTI)
  *gprs_ind = gmmShrdPrm.gprs_indicator;
  *rt       = gmmShrdPrm.rt;
#else
  *gprs_ind = P_CREG_GPRS_Not_Supported; /* ACI-SPR-17218: use ACI type */
  *rt       = 0;
#endif /* GPRS */

  return( AT_CMPL );
}

#ifdef TI_PS_FF_AT_CMD_WS46
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PlusWS46             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +WS46? AT
            command which returns the current setting wireless network
            selection.

            <mode>:   network mode.
*/

GLOBAL T_ACI_RETURN qAT_PlusWS46 (T_ACI_CMD_SRC  srcId,
                                  T_ACI_WS46_MOD * mode )
{

  TRACE_FUNCTION ("qAT_PlusWS46()");

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  *mode = WS46_MOD_Gsm;

  return( AT_CMPL );
}
#endif /* TI_PS_FF_AT_CMD_WS46 */
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCOPN             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +COPN AT
            command which returns the current operator names stored in
            ME.

            <lstId>:      list identifier.
            <startIdx>:   start index to read from.
            <lastIdx>:    buffer for index of last copied name.
            <oprLstBuf>:  buffer for operator names. length of MAX_OPER.
*/

GLOBAL T_ACI_RETURN qAT_PlusCOPN  ( T_ACI_CMD_SRC    srcId,
                                    T_ACI_COPN_LID   lstId,
                                    SHORT            startIdx,
                                    SHORT           *lastIdx,
                                    T_ACI_COPN_OPDESC *oprLstBuf)
{
  USHORT  idx;                        /* holds list idx */
  EF_PLMN plmnBuf;                    /* buffer PCM entry */
  USHORT  maxRec;                     /* holds maximum records */
  USHORT  recNr;                      /* holds record number */
  USHORT  oprLstLen;                  /* holds fixed oper list length */
  UBYTE   retVal;                     /* holds return value */
  UBYTE   ver;                        /* holds version */
  UBYTE   len;                        /* holds operator name length */

#ifdef TI_PS_OP_OPN_TAB_ROMBASED
/* Changes for ROM data */ 
  const UBYTE *plmn_comp_entry; /* get a local pointer holder */
  T_OPER_ENTRY oper;
  int  i;
#endif

  TRACE_FUNCTION ("qAT_PlusCOPN()"); 

/*
 *-------------------------------------------------------------------
 * determine list identifier
 *-------------------------------------------------------------------
 */
  switch( lstId )
  {
  /*
   *-----------------------------------------------------------------
   * for the list in permanent configuration memory
   *-----------------------------------------------------------------
   */
    case( COPN_LID_Pcm ):

      recNr = startIdx+1;
      idx   = 0;

      do
      {
        /* Implements Measure#32: Row 981  */
        retVal= pcm_ReadRecord( (UBYTE *) ef_plmn_id, recNr, SIZE_EF_PLMN,
                                (UBYTE *) &plmnBuf, &ver, &maxRec );

        if( retVal EQ PCM_INVALID_SIZE OR retVal EQ PCM_INVALID_RECORD )
        {
          if( idx EQ 0 )
          {
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
            return( AT_FAIL );
          }
          break;
        }

        if( plmnBuf.mcc[0] NEQ 0xFF AND plmnBuf.mnc[0] NEQ 0xFF AND
            plmnBuf.lngNam[0] NEQ 0xFF )
        {
          /* Implements Measure#32: Row 980 */
          sprintf(oprLstBuf[idx].numOper, format_03x02x_str,
                  ((plmnBuf.mcc[0]<<8) + plmnBuf.mcc[1]),
                  ((plmnBuf.mnc[0]<<8) + plmnBuf.mnc[1]));

          for( len = 0;
               len < SIZE_EF_PLMN_LONG AND plmnBuf.lngNam[len] NEQ 0xFF;
               len++ )
            ;

          utl_cvtGsmIra( plmnBuf.lngNam, len,
                         (UBYTE*)oprLstBuf[idx].alphaOper,
                         MAX_ALPHA_OPER_LEN,
                         CSCS_DIR_GsmToIra );

          oprLstBuf[idx].alphaOper[MINIMUM(len,MAX_ALPHA_OPER_LEN-1)] = 0x0;
          idx++;
        }

        recNr++;
      }
      while( idx < MAX_OPER );

      break;
  /*
   *-----------------------------------------------------------------
   * for the list in constant memory
   *-----------------------------------------------------------------
   */
    case( COPN_LID_Cnst ):

      oprLstLen = cmhMM_GetOperLstLen();

      if( startIdx >= oprLstLen )
      {
        ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
        return( AT_FAIL );
      }
#ifdef TI_PS_OP_OPN_TAB_ROMBASED
   /* Changes for ROM data */ 

    plmn_comp_entry = ptr_plmn_compressed;

    /* skip the first (start-1) number of plmn entries. */
    i=0;
    while (i < startIdx) {
        plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);
        i+=1;
    }

      for( idx = 0, recNr = startIdx;
           idx < MAX_OPER AND recNr < oprLstLen AND 
           !(cmhMM_decodePlmn (&oper, plmn_comp_entry));
           idx++, recNr++ )
      {
        /* Implements Measure#32: Row 980 */
        cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
                            oper.mcc,
                            oper.mnc);

        strncpy( oprLstBuf[idx].alphaOper, oper.longName,
                 MAX_ALPHA_OPER_LEN-1 );

        oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;

        /* Next compressed PLMN entry */
        plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);        
      }
#else
      for( idx = 0, recNr = startIdx;
           idx < MAX_OPER AND recNr < oprLstLen;
           idx++, recNr++ )
      {
        /* Implements Measure#32: Row 980 */
        cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
                            operListFixed[recNr].mcc,
                            operListFixed[recNr].mnc);

        strncpy( oprLstBuf[idx].alphaOper, operListFixed[recNr].longName,
                 MAX_ALPHA_OPER_LEN-1 );

        oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;
      }
#endif
      break;
  /*
   *-----------------------------------------------------------------
   * unexpected list type
   *-----------------------------------------------------------------
   */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * terminate list and set last index
 *-------------------------------------------------------------------
 */
  if( idx < MAX_OPER )
  {
    oprLstBuf[idx].numOper[0]   = 0x0;
    oprLstBuf[idx].alphaOper[0] = 0x0;
  }


  *lastIdx = ( recNr NEQ 0 )?recNr-1:0;

  return( AT_CMPL );
}

/*
+-------------------------------------------------------------------+
|  NEW AT Command qAT_PercentCOPN                                   |
|                                                                   |
+-------------------------------------------------------------------+
*/
 /*The same function in EDGE should be remved from ACIA when EDGE is 
     merged to the UMTS*/ 

GLOBAL T_ACI_RETURN qAT_PercentCOPN( T_ACI_CMD_SRC  srcId,
                                     T_ACI_COPS_FRMT format,
                                     CHAR *opr,
                                     T_ACI_OPER_NTRY *oper_ntry)
{
  T_OPER_ENTRY plmnDesc;
  BOOL         found;

  if(format EQ COPS_FRMT_Numeric)
  {
    found = cmhMM_FindNumeric(&plmnDesc, opr);
  }
  else
  {
    found = cmhMM_FindName(&plmnDesc, opr,(T_ACI_CPOL_FRMT)format);
  }
  if (found)
  {
    oper_ntry->mcc = plmnDesc.mcc;
    oper_ntry->mnc = plmnDesc.mnc;
    strncpy (oper_ntry->longName, plmnDesc.longName, sizeof(oper_ntry->longName));
    oper_ntry->longName[sizeof(oper_ntry->longName) - 1] = '\0';
    strncpy ((CHAR *)oper_ntry->shrtName, plmnDesc.shrtName, sizeof(oper_ntry->shrtName));
    oper_ntry->shrtName[sizeof(oper_ntry->shrtName) - 1] = '\0';
    oper_ntry->long_len = plmnDesc.long_len;
    oper_ntry->shrt_len = plmnDesc.shrt_len;
    switch (plmnDesc.pnn)
    {
      case Read_EONS:
        oper_ntry->source = Read_EONS;
        break;
      case Read_CPHS:
        oper_ntry->source = Read_CPHS;
        break;
      default:
        oper_ntry->source = Read_ROM_TABLE;
        break;
    }
  }
  else
  {
    oper_ntry->longName[0] = '\0';
    oper_ntry->shrtName[0] = '\0';
    oper_ntry->mcc = 0;
    oper_ntry->mnc = 0;
    oper_ntry->source = Read_INVALID;
  }	
  return AT_CMPL;
}




/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PercentNRG           |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %NRG? AT command
            which returns the current setting of registration mode and
            service mode and the current status of service.

            <regMode>:   registration mode.
            <srvMode>:   service mode.
            <oprFrmt>:   operator format.
            <srvStat>:   service status.
            <oper>   :   operator
*/

GLOBAL T_ACI_RETURN qAT_PercentNRG( T_ACI_CMD_SRC srcId,
                                    T_ACI_NRG_RGMD *regMode,
                                    T_ACI_NRG_SVMD *srvMode,
                                    T_ACI_NRG_FRMT *oprFrmt,
                                    T_ACI_NRG_SVMD *srvStat,
                                    CHAR           *oper)
{

  T_ACI_COPS_FRMT copsFormat;
  

  TRACE_FUNCTION ("qAT_PercentNRG()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  switch( mmShrdPrm.regStat )
  {
    case( NO_VLD_RS   ):
    case( RS_NO_SRV   ):  *srvStat = NRG_SVMD_NoSrv;      break;
    case( RS_LMTD_SRV ):  *srvStat = NRG_SVMD_Limited;    break;
    case( RS_FULL_SRV ):  *srvStat = NRG_SVMD_Full;       break;
    default:              *srvStat = NRG_SVMD_NotPresent; break;
  }

  *srvMode = cmhPrm[srcId].mmCmdPrm.NRGsrvMode;
  *oprFrmt = cmhPrm[srcId].mmCmdPrm.NRGoprFrmt;
  *oper    = 0x0;

  *regMode = cmhPrm[srcId].mmCmdPrm.NRGregMode;

   switch( *oprFrmt )
  {
    case(  NRG_FRMT_NotPresent  ): 
    copsFormat = COPS_FRMT_NotPresent; 
    break;
    case( NRG_FRMT_Numeric   ): 
    copsFormat = COPS_FRMT_Numeric  ; 
    break;
    case( NRG_FRMT_Short):
    copsFormat = COPS_FRMT_Short ; 
    break;
    case( NRG_FRMT_Long):
    copsFormat = COPS_FRMT_Long; 
    break;
    default:
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }


  cmhMM_OperatorQuery(srcId,copsFormat,oper);

  

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : ACI/MMI	         MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PercentCSQ             |
+--------------------------------------------------------------------+

  PURPOSE : This is the function for Signal Quality query  			

  Shen,Chao
  Juni.13th, 2003
*/
#ifdef FF_PS_RSSI
GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
                                    UBYTE *rssi,
                                    UBYTE *ber,
                                    UBYTE *actlevel,
                                    UBYTE *min_access_level)
#else
GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
                                    UBYTE *rssi,
                                    UBYTE *ber,
                                    UBYTE *actlevel)
#endif
{
  rx_Status_Type    rxStat;  

  TRACE_FUNCTION("qAT_PercentCSQ()");

  if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return AT_FAIL;
  }
  else
  {
    if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 )
    {
      *rssi = ACI_RSSI_FAULT;
    }
    else if ( rxStat.gsmLevel > 59 )
    {
      *rssi = 31;
    }
    else
    {
      *rssi = ( rxStat.gsmLevel / 2 ) + 2;
    }

    if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE )
    {
      *ber = ACI_BER_FAULT;
    }
    else
    {
      *ber = rxStat.rxQuality;
    }

    *actlevel = rxStat.actLevel;


#ifdef FF_PS_RSSI
    if ( rxStat.min_access_level EQ RX_ACCE_UNAVAILABLE )
    {
      *min_access_level = ACI_MIN_RXLEV_FAULT;
    }
    else
    {
      *min_access_level = rxStat.min_access_level;
    }
#endif

    return AT_CMPL;
  }
}

#ifdef TI_PS_FF_AT_P_CMD_DBGINFO
/*
+--------------------------------------------------------------------+
| PROJECT : ACI/MMI	              MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PercentDBGINFO       |
+--------------------------------------------------------------------+

  PURPOSE : query free mem pool blocks.		
*/
GLOBAL T_ACI_RETURN qAT_PercentDBGINFO(T_ACI_CMD_SRC srcId, 
                                       ULONG param,
                                       USHORT stor,
                                       USHORT *free,
                                       USHORT *alloc)
{
  int ret=0;

  TRACE_FUNCTION ("qAT_PercentDBGINFO()");
  /*
   *-----------------------------------------------------------------
   * check command source
   *-----------------------------------------------------------------
   */  
  if( ! cmh_IsVldCmdSrc (srcId) ) 
  { 
    return (AT_FAIL);
  }

  ret = vsi_m_status (hCommACI,
                       param,
                       stor,
                       free,
                       alloc );
  if (ret EQ VSI_ERROR OR *free EQ 0)
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_MemFull );
    return (AT_FAIL);
  }

  return (AT_CMPL);
}
#endif /* TI_PS_FF_AT_P_CMD_DBGINFO */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCTZR             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CTZR AT command
            which will query the status of CTZRmode, indicating whether time
            zone change rep[orting is enabled or disabled.

            <on/off>:   Indicates whether time zone reporting is enabled or disabled.
*/

GLOBAL T_ACI_RETURN qAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
                                   T_ACI_CTZR_MODE *mode)
{
  TRACE_FUNCTION ("qAT_PlusCTZR()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("qAT_PlusCTZR(): Invalid source: %d", srcId);
    return( AT_FAIL );
  }

  *mode = cmhPrm[srcId].mmCmdPrm.CTZRMode;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCTZU             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CTZU AT command
            which will query the status of CTZUmode, indicating whether time
            zone automatic update is enabled or disabled.

            <on/off>:   Indicates whether time zone automatic update is enabled or disabled.
*/

GLOBAL T_ACI_RETURN qAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
                                   T_ACI_CTZU_MODE *mode)
{
  TRACE_FUNCTION ("qAT_PlusCTZU()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("qAT_PlusCTZU(): Invalid source: %d", srcId);
    return( AT_FAIL );
  }

  *mode = cmhPrm[srcId].mmCmdPrm.CTZUMode;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT :                       MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCCLK          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the sAT_PlusCCLK command
            which will query the status of the RTC in the MT, indicating what the time
            is in the MT.
*/
GLOBAL T_ACI_RETURN qAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
                                   T_ACI_RTC_DATE *date_s,
                                   T_ACI_RTC_TIME *time_s,
                                   int * timeZone
                                 )
{
#ifndef _SIMULATION_
  UBYTE  ret;
#endif /* _SIMULATION_ */

  TRACE_FUNCTION ("qAT_PlusCCLK()");
/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("qAT_PlusCCLK(): Invalid source: %d", srcId);
    return( AT_FAIL );
  }

  TRACE_EVENT("qAT_PlusCCLK(): get time and date " );
#ifndef _SIMULATION_
  ret = rtc_get_time_date((T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s);
  switch (ret)
  {
    case 0:                     /* RVF_OK */
#ifdef FF_TIMEZONE
      *timeZone = RTC_GetCurrentTZ(); /* Get current timezone now time and date are obtained.*/
      TRACE_EVENT_P1("qAT_PlusCCLK(): timezone obatained: %d", *timeZone);
#endif /* FF_TIMEZONE */
      return( AT_CMPL );
    default:
      TRACE_EVENT_P1("qAT_PlusCCLK(): ERROR: %d", ret);  /* RVF_NOT_READY or RVF_INTERNAL ERROR */
      return( AT_FAIL );
  }
#else  /* _SIMULATION_ */
/* Set return info for date time to: "04/08/17,13:31:04-10" */
  date_s->year    = 2004;
  date_s->month   = 8;
  date_s->day     = 17;

  time_s->hour    = 13;
  time_s->minute  = 31;
  time_s->second  = 4;

  time_s->format  = 0;  /* RTC_TIME_FORMAT_24HOUR = 0 */
  time_s->PM_flag = 0;
  *timeZone = -10;  /* Set timezone to -10 */
  return( AT_CMPL );
#endif /* _SIMULATION_ */

}



/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PercentCTZV             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CTZV AT command
            which will query the status of PCTZVmode, indicating whether time
            and date report is enabled or disabled.

            <on/off>:   Indicates whether time and date report is enabled or disabled.
*/

GLOBAL T_ACI_RETURN qAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
                                   T_ACI_PCTZV_MODE *mode)
{
  TRACE_FUNCTION ("qAT_PercentCTZV()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("qAT_PercentCTZV(): Invalid source: %d", srcId);
    return( AT_FAIL );
  }

  *mode = cmhPrm[srcId].mmCmdPrm.PCTZVMode;

  return( AT_CMPL );
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PercentCNIV             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CNIV AT command
            which will query the status of CNIVmode, indicating whether time
            and date report is enabled or disabled.

            <on/off>:   Indicates whether time and date report is enabled or disabled.
*/

GLOBAL T_ACI_RETURN qAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
                                   T_ACI_CNIV_MODE *mode)
{
  TRACE_FUNCTION ("qAT_PercentCNIV()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("qAT_PercentCNIV(): Invalid source: %d", srcId);
    return( AT_FAIL );
  }

  *mode = cmhPrm[srcId].mmCmdPrm.CNIVMode;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCIND             |
+--------------------------------------------------------------------+

  PURPOSE : This is the function for Signal Quality query
*/

GLOBAL T_ACI_RETURN qAT_PlusCIND ( T_ACI_CMD_SRC srcId,
                                   T_ACI_CIND_SIGNAL_TYPE  *sCindSgnalSettings,
                                   T_ACI_CIND_SMSFULL_TYPE *sCindSmsFullSettings )
{
  T_ACI_MM_CIND_VAL_TYPE  *pMMCmdPrm;

  TRACE_FUNCTION ("qAT_PlusCIND()");

  if( !cmh_IsVldCmdSrc( srcId ) OR (sCindSgnalSettings EQ NULL) OR (sCindSmsFullSettings EQ NULL) )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);

  *sCindSgnalSettings   = pMMCmdPrm->sCindSignalParam;
  *sCindSmsFullSettings = pMMCmdPrm->sCindSmsFullParam;

  return(AT_CMPL);
}


/*
+--------------------------------------------------------------------+
| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCMER             |
+--------------------------------------------------------------------+

  PURPOSE : This is the function for Signal Quality query
*/

GLOBAL T_ACI_RETURN qAT_PlusCMER ( T_ACI_CMD_SRC srcId,
                                   T_ACI_CMER_MODE_TYPE *sCmerModeSettings,
                                   T_ACI_CMER_IND_TYPE  *sCmerIndicationSettings,
                                   T_ACI_CMER_BFR_TYPE  *sCmerBfrSettings )

{
  T_ACI_MM_CMER_VAL_TYPE  *pMMCmdPrm;

  TRACE_FUNCTION ("qAT_PlusCMER()");

  if( !cmh_IsVldCmdSrc( srcId ) OR (sCmerModeSettings EQ NULL) OR
      (sCmerIndicationSettings EQ NULL) OR (sCmerBfrSettings EQ NULL))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);

  *sCmerModeSettings       = pMMCmdPrm->sCmerModeParam;
  *sCmerIndicationSettings = pMMCmdPrm->sCmerIndParam;
  *sCmerBfrSettings        = pMMCmdPrm->sCmerBfrParam;

  return(AT_CMPL);
}

/* Implements Measure 127 */
/*
+------------------------------------------------------------------------------
|  Function    : qat_plus_percent_COPS 
+------------------------------------------------------------------------------
|  Purpose     : This is the functional counterpart to Both +COPS? and %COPS 
|                AT command which returns the current setting of mode, 
|                format and operator.
|
|  Parameters  : srcId      - AT command source identifier
|                mode       - +COPS parameter <mode> 
|                format     - +COPS parameter <format>
|                oper       - Operator
|                svrStatus  - %COPS parameter <srvStatus>
|                at_cmd_id  - AT Command Identifier
|
|  Return      : ACI functional return codes
+------------------------------------------------------------------------------
*/

LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD * mode,
                                          T_ACI_COPS_FRMT * format, CHAR * oper,
                                          T_ACI_COPS_SVST * svrStatus)
{

  T_MM_CMD_PRM * pMMCmdPrm;   /* points to MM command parameters */

  TRACE_FUNCTION ("qat_plus_percent_COPS()");

  /* check command source */  
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;

  /* fill in parameters */  
  switch(mmShrdPrm.COPSmode)
  {
    case(COPS_MOD_Auto):
    case(COPS_MOD_Man):
    case(COPS_MOD_Dereg):
      *mode = mmShrdPrm.COPSmode;
      break;

    /*
     * case(COPS_MOD_SetOnly):
     * mmShrdPrm.COPSmode can't have been set with this value
     */

    case(COPS_MOD_Both):
      if(mmShrdPrm.regModeAutoBack)
      {
        *mode = COPS_MOD_Man;
      }
      else
      {
        *mode = COPS_MOD_Auto;
      }
      break;

    default:
      *mode = (T_ACI_COPS_MOD)mmShrdPrm.regMode;
      break;
  }

  *format = pMMCmdPrm -> COPSfrmt;

  if ( svrStatus )
  {
    switch( mmShrdPrm.regStat )
    {
      case( NO_VLD_RS   ):
      case( RS_NO_SRV   ):  *svrStatus = COPS_SVST_NoSrv;      break;
      case( RS_LMTD_SRV ):  *svrStatus =COPS_SVST_Limited;     break;
      case( RS_FULL_SRV ):  *svrStatus = COPS_SVST_Full;       break;
      default:              *svrStatus = COPS_SVST_NotPresent; break;
    }
  }

  *oper   = 0x0;
  cmhMM_OperatorQuery(srcId,pMMCmdPrm -> COPSfrmt,oper);
  TRACE_EVENT(oper);
  return( AT_CMPL );
}
#ifdef TI_PS_FF_AT_P_CMD_CTREG
/*
+--------------------------------------------------------------------+
| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
| STATE   : code                  ROUTINE : qAT_PlusCTREG            |
+--------------------------------------------------------------------+

  PURPOSE : This is the function for Signal Quality query
*/

GLOBAL T_ACI_RETURN qAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_ACI_TREG *treg )
{
  BOOL ret = FALSE;

  TRACE_FUNCTION ("qAT_PlusCTREG()");

  if( !cmh_IsVldCmdSrc( srcId ))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  ret = cl_shrd_get_treg_val(treg);

  if(ret EQ TRUE)
  {
    return (AT_CMPL);
  }

  return (AT_FAIL);
}
#endif /* TI_PS_FF_AT_P_CMD_CTREG */

/*==== EOF ========================================================*/