FreeCalypso > hg > fc-tourmaline

view src/g23m-aci/aci/cmh_uart.h @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_UART
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_UART_H
#define CMH_UART_H


EXTERN T_ACI_LIST *uart_src_params;
EXTERN T_ACI_LIST *uart_com_par;

/*==== CONSTANTS ==================================================*/
#define NOT_SUPPORTED_UART_IO_PA_MARK 4 /* the UART does not support parity mark directly */

/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE         *data;
  USHORT        data_len;
  T_ACI_CMD_SRC srcId;
} T_ACI_DTI_SEND;

typedef T_comPar T_ACI_UART_COM_PAR;
typedef struct {
  UBYTE               device;
  T_ACI_UART_COM_PAR  comPar;
  
} T_ACI_DEVICE_ENTRY;



/*==== PROTOTYPES =================================================*/

/*==== EXPORT =====================================================*/
EXTERN void           timeout_PlusIPR (void);

EXTERN BOOL           cmhUART_CMUX (T_ACI_CMD_SRC srcId);

EXTERN void           cmhUART_lst_init (void);
EXTERN BOOL           cmhUARTtest_srcId (UBYTE srcId,
                                         void *elem);

EXTERN BOOL           cmhUARTtest_device (UBYTE device,
                                          void *elem);

EXTERN T_ACI_DTI_PRC *cmhUART_find_dlci (T_ACI_LIST *search_list,
                                         UBYTE device,
                                         UBYTE dlci );
EXTERN void cmhUART_startConnection (UBYTE srcId, 
                                      T_ACI_DEVICE_TYPE device_type);

EXTERN BOOL cmhUART_stopConnection (UBYTE srcId);
EXTERN void cmhUART_getdata ( T_ACI_CMD_SRC srcId );

EXTERN void cmhUART_ParmsUpdated( UBYTE device );
EXTERN void cmhUART_DetectedESC_DTR( UBYTE device, UBYTE dlci, UBYTE cause );
EXTERN void cmhUART_init_ipr_params(void);

/*
 *  functions for cotroling UART parameters (baud rate, character framing, flow control)
 */
EXTERN void cmhUART_AddDeviceToComParameter( UBYTE device );
EXTERN void cmhUART_CleanComParameterList( void );

EXTERN T_ACI_DEVICE_TYPE cmhUART_GetDeviceType( UBYTE srcId );
EXTERN BOOL cmhUART_ChangeDeviceType( UBYTE             srcId, 
                                      T_ACI_DEVICE_TYPE device_type );
EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverDevice( UBYTE device );
EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverSrcID( UBYTE srcId );
EXTERN void cmhUART_SetComParToUnchanged( T_comPar *comPar );
EXTERN T_ACI_RETURN cmhUART_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE  rate);
EXTERN T_ACI_RETURN cmhUART_SetCharacterFraming ( UBYTE srcId, 
                                                  T_ACI_BS_FRM format, 
                                                  T_ACI_BS_PAR parity );
EXTERN T_ACI_RETURN cmhUART_SetFlowControl(UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE);
EXTERN T_ACI_BS_FRM cmhUART_GetFktInterfaceFormat( T_ACI_UART_COM_PAR *comPar );
EXTERN T_ACI_BS_PAR cmhUART_GetFktInterfaceParity( T_ACI_UART_COM_PAR *comPar );

EXTERN UBYTE cmhUART_GetParityOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhUART_GetDataBitOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhUART_GetStopBitOverSrcID( UBYTE srcId );
EXTERN void  cmhUART_lst_exit (void);


#ifdef CMH_UARTF_C

GLOBAL T_ACI_AT_CMD uartEntcurCmd[CMD_SRC_MAX];

#else

EXTERN T_ACI_AT_CMD uartEntcurCmd[];

#endif /* CMH_UARTF_C */

#endif /* CMH_UART_H */

/*==== EOF =======================================================*/