view src/g23m-aci/aci/dcm_state.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Description :  DCM instance is a state machine with several possible states.
|                 Based on the current state, DCM handle different kind of messages/events.
|                 States are listed in the order they should normally be sequenced.
+-----------------------------------------------------------------------------
*/

#ifndef __DCMSTATE_H__
#define __DCMSTATE_H__

/**
 * DCM states.
 *
 * DCM instance is a state machine with several possible states.
 * Based on the current state, DCM handle different kind of messages/events.
 * States are listed in the order they should normally be sequenced.
 *
 * See the Readme file for a description of the state machine.
 */
typedef enum
{
	DCM_OFF,
	DCM_IDLE,
	DCM_ACTIVATING_CONN,
	DCM_CONN_ACTIVATED,
	DCM_CLOSING_CONN
} T_DCM_INTERNAL_STATE;


/**
 * DCM substates.
 *
 * DCM instance is a state machine with several possible states.
 * Substates are included in some states.
 */

typedef enum
{
  DCM_SUB_NO_ACTION = 0,                            /* ALL */
  DCM_SUB_WAIT_CGATT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_CGACT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATDN_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATH_CNF,                            /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEATT_CNF,                         /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEACT_CNF                          /* DCM_CLOSING_CONN    */
} T_DCM_INTERNAL_SUBSTATE;


T_DCM_RET dcm_idle (T_DCM_HDR * msg_p);
T_DCM_RET dcm_activating_conn(T_DCM_HDR * msg_p);
T_DCM_RET dcm_conn_activated(T_DCM_HDR * msg_p);
T_DCM_RET dcm_closing_conn(T_DCM_HDR * msg_p );

T_DCM_RET dcm_new_state(U8 state, U8 substate);
T_DCM_RET dcm_save_state(void);
T_DCM_RET dcm_restore_state(void);
void dcm_dispay_state(U8 state, U8 substate);
void dcm_dispay_sub_state(U8 substate_1, U8 substate_2);


#endif