view src/g23m-aci/aci/psa_ipas.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_IPAS
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
#if defined (FF_WAP) || defined (FF_SAT_E)

#ifndef PSA_IPAS_C
#define PSA_IPAS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "aci.h"
#include "psa.h"
//#include "psa_l2r.h"
#include "psa_cc.h"
#include "aci_fd.h"
#include "cmh.h"
#include "dti_conn_mng.h"
//#include "cmh_l2r.h"

#include "wap_aci.h"
#include "psa_tcpip.h"

#ifdef GPRS
#include "gaci.h"
#include "cmh_sm.h"
#endif

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPA                      |
|                            ROUTINE : psaIPA_Config                |
+-------------------------------------------------------------------+

  PURPOSE : Configurate or disconfigurate IPA.

*/

GLOBAL void psaIPA_Config(ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc
                      /*T_ACI_AT_CMD at_cmd */)
{
                  /* dirc = IPA_CONN if IPA is to be activated
                     dirc = IPA_DSC if IPA i to be deactivated */

  TRACE_FUNCTION("psaIPA_Config()") ;

  switch( dirc )
  {

  case ( IPA_CONN ):
    wap_state = IPA_Configuration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = ip;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_UP;
      ipa_config_req -> mtu = max_trans_unit;

      PSENDX(IP,ipa_config_req);
    }
    break;

  case ( IPA_DSC ):
    wap_state = IPA_Deconfiguration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = 0;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_DOWN;
      ipa_config_req -> mtu = 0;

      PSENDX(IP,ipa_config_req);
    }
    break;
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPAS                     |
|                            ROUTINE : psaIPA_Dti_Req               |
+-------------------------------------------------------------------+

  PURPOSE : connect IP

*/

GLOBAL void psaIPA_Dti_Req(ULONG link_id, UBYTE peer_to_connect_to, UBYTE dti_conn)
{

  PALLOC( ipa_dti_req, IPA_DTI_REQ);

  

#ifdef GPRS
  T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = NULL;
    
  p_pdp_context_node = pdp_context_find_node_from_cid( work_cids[cid_pointer]);

  if( p_pdp_context_node )
  {
    p_pdp_context_node->internal_data.link_id = link_id;
  }

  /* This is probably not the right place to populate the link id since
     IPA dti req might be sent for CSD call as well ! Need to investigate
     as separate issue.
  */
#endif /* GPRS */

  TRACE_FUNCTION("psaIPA_Dti_Req");

  ipa_dti_req -> dti_conn  = dti_conn;
  ipa_dti_req -> link_id   = link_id;

  if (dti_conn EQ IPA_CONNECT_DTI)
  {
    switch( peer_to_connect_to )
    {
    case( DTI_ENTITY_UDP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_UDP].name);
      break;
#ifdef GPRS
    case( DTI_ENTITY_SNDCP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SNDCP].name);
      break;
#endif
    case( DTI_ENTITY_PPPC ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_PPPC].name);
      break;
    default:
      TRACE_EVENT("unknown conn_peer_Id: IPA_DTI_REQ not sent");
      PFREE(ipa_dti_req);
      return;
    }
  }

  PSENDX( IP, ipa_dti_req );
}


#endif /* WAP || SAT E */