view src/g23m-aci/aci/psa_tras.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_TRAS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 
#ifdef DTI

#ifndef PSA_TRAS_C
#define PSA_TRAS_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci.h"
#include "psa.h"
#include "cmh.h"
#include "aci_fd.h"
#include "cmh_ra.h"
#include "psa_l2r.h"
#include "dti_conn_mng.h"
#include "cmh_l2r.h"
#include "psa_uart.h"

#include "psa_util.h"
#include "psa_tra.h"

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Activate         |
+-------------------------------------------------------------------+

  PURPOSE :

*/

GLOBAL void psaTRA_Activate (void)
{
  TRACE_FUNCTION ("psaTRA_Activate()");
  TRA_is_activated = FALSE;
  {
    PALLOC (tra_activate_req, TRA_ACTIVATE_REQ);
#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_activate_req);
#else 
    PSENDX (TRA, tra_activate_req);
#endif
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Dti_Req          |
+-------------------------------------------------------------------+

  PURPOSE : connect or disconnect TRA (depends on dti_conn).

*/

GLOBAL void psaTRA_Dti_Req (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn, UBYTE peer)
{
  
  UBYTE dti_id = EXTRACT_DTI_ID( link_id );

  TRACE_FUNCTION ("psaTRA_Dti_Req()");

  {
    PALLOC (tra_dti_req, TRA_DTI_REQ);

    tra_dti_req->dti_conn      = dti_conn;
    tra_dti_req->link_id       = link_id;

    if (IS_SRC_BT(dti_id))
    {
      TRACE_EVENT("psa_tras - BT_ADAPTER Act");
      strcpy((CHAR*)tra_dti_req->entity_name, BTI_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_HIGHER_LAYER;
    }
#ifdef FF_SAT_E    
    else if (peer EQ DTI_ENTITY_SIM)
    {
      strcpy((CHAR*)tra_dti_req->entity_name, SIM_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_HIGHER_LAYER;
    }
#endif /* FF_SAT_E */    
    else if (peer EQ DTI_ENTITY_UART)
    {
      strcpy((CHAR*)tra_dti_req->entity_name, UART_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_LOWER_LAYER;
    }
    else
    {
      strcpy((CHAR*)tra_dti_req->entity_name, PSI_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_LOWER_LAYER; 
    }
    if (dti_conn EQ TRA_CONNECT_DTI)
    {
      if (dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_TRA, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE)
      {
        return;
      }
    }

#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_dti_req);
#else 
    PSENDX (TRA, tra_dti_req);
#endif
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Deactivate       |
+-------------------------------------------------------------------+

  PURPOSE :

*/

GLOBAL void psaTRA_Deactivate (void)
{
  TRACE_FUNCTION ("psaTRA_Deactivate()");

  if (TRA_is_activated EQ FALSE)
    return;
  else
    TRA_is_activated = FALSE;

  {
    PALLOC (tra_deactivate_req, TRA_DEACTIVATE_REQ);
#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_deactivate_req);
#else 
    PSENDX (TRA, tra_deactivate_req);
#endif
  }
}
#endif /* DTI */