view src/g23m-fad/ppp/ppp_frxs.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity PPP and implements all 
|             functions to handles the incoming process internal signals as  
|             described in the SDL-documentation (FRX-statemachine)
+----------------------------------------------------------------------------- 
*/ 

#define ENTITY_PPP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"     /* to get a lot of macros */
#include "custom.h"     /* to get a lot of macros */
/*lint -efile(766,gsm.h) */
#include "gsm.h"        /* to get a lot of macros */
/*lint -efile(766,cnf_ppp.h) */
#include "cnf_ppp.h"    /* to get cnf-definitions */
/*lint -efile(766,mon_ppp.h) */
#include "mon_ppp.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "dti.h"        /* to get the DTILIB definitions */
#include "ppp.h"        /* to get the global entity definitions */

#include "ppp_frxf.h"   /* to get function interface from frx */
#include "ppp_arbf.h"   /* to get function interface from arb */
#include "ppp_ptxs.h"   /* to get signal interface from ptx */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_ptx_frx_dead_mode_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_PTX_FRX_DEAD_MODE_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ptx_frx_dead_mode_req () 
{
  TRACE_ISIG( "sig_ptx_frx_dead_mode_req" );

  arb_discard_packet(ppp_data->frx.received_data);
  arb_discard_packet(ppp_data->frx.stored_packet);
  ppp_data->frx.received_data   = NULL;
  ppp_data->frx.stored_packet   = NULL;
  ppp_data->frx.store_state     = FRX_ADD_ERROR;
  ppp_data->frx.frame_complete  = FALSE;
  ppp_data->frx.data_flow_state = FRX_DATA_FLOW_DEAD;

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_READY:
    case FRX_READY_NDTI:
    case FRX_TRANSPARENT:
    case FRX_TRANSPARENT_NDTI:
      SET_STATE( PPP_SERVICE_FRX, FRX_DEAD );
      break;

    default:
      TRACE_ERROR( "SIG_PTX_FRX_DEAD_MODE_REQ unexpected" );
      break;
  }
} /* sig_ptx_frx_dead_mode_req() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ptx_frx_ready_mode_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_PTX_FRX_READY_MODE_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ptx_frx_ready_mode_req () 
{
  TRACE_ISIG( "sig_ptx_frx_ready_mode_req" );

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_DEAD:
      SET_STATE( PPP_SERVICE_FRX, FRX_READY_NDTI );
      break;

    case FRX_DEAD_DTI:
      SET_STATE( PPP_SERVICE_FRX, FRX_READY );
      break;

    default:
      TRACE_ERROR( "SIG_PTX_FRX_READY_MODE_REQ unexpected" );
      break;
  }
} /* sig_ptx_frx_ready_mode_req() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ptx_frx_transparent_mode_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_PTX_FRX_TRANSPARENT_MODE_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ptx_frx_transparent_mode_req () 
{
  TRACE_ISIG( "sig_ptx_frx_transparent_mode_req" );

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_DEAD:
      SET_STATE( PPP_SERVICE_FRX, FRX_TRANSPARENT_NDTI );
      break;

    case FRX_DEAD_DTI:
      SET_STATE( PPP_SERVICE_FRX, FRX_TRANSPARENT );
      break;

    default:
      TRACE_ERROR( "SIG_PTX_FRX_TRANSPARENT_MODE_REQ unexpected" );
      break;
  }
} /* sig_ptx_frx_transparent_mode_req() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ptx_frx_start_flow_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_PTX_FRX_START_FLOW_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ptx_frx_start_flow_req () 
{
  TRACE_ISIG( "sig_ptx_frx_start_flow_req" );
  /*
   * set FRX PTX data flow state to ready.
   */
  ppp_data->frx.data_flow_state = FRX_DATA_FLOW_READY;

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_READY:
      /*
       * Send if necessary residuary packets from frame received before
       */
      frx_send_pack_ready_mode ();
      /* 
       * check if all packet of frame were sent and start dti
       */
      if((ppp_data->frx.frame_complete  EQ FALSE )         AND
         (ppp_data->frx.data_flow_state EQ FRX_DATA_FLOW_READY))
      {
        /*
         * Send a start signal to DTI 
         */
        dti_start(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL);
      }
      break;

    case FRX_TRANSPARENT:
      /*
       * Send if necessary residuary packets from frame received before
       */
      frx_send_pack_transp_mode ();
      /* 
       * check if all packet of frame were sent and start dti 
       */
      if((ppp_data->frx.frame_complete  EQ FALSE)          AND
         (ppp_data->frx.data_flow_state EQ FRX_DATA_FLOW_READY))
      {
        /*
         * Send a start signal to DTI 
         */
        dti_start(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL);
      }
      break;
    case FRX_READY_NDTI:
    case FRX_TRANSPARENT_NDTI: 
      /*
       * silently ignore duplicate signal..
       */
      break;

    default:
      TRACE_ERROR( "SIG_PTX_FRX_START_FLOW_REQ unexpected" );
      break;
  }

} /* sig_ptx_frx_start_flow_req() */


/*
+------------------------------------------------------------------------------
| Function    : sig_ptx_frx_stop_flow_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_PTX_FRX_STOP_FLOW_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ptx_frx_stop_flow_req () 
{
  TRACE_ISIG( "sig_ptx_frx_stop_flow_req" );

  /*
   * set FRX-PTX data flow state to dead.
   */
  ppp_data->frx.data_flow_state = FRX_DATA_FLOW_DEAD;
  
  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_READY:
    case FRX_TRANSPARENT:
      /*
       * Send a stop signal to DTI 
       */
      dti_stop(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL);
      break;

    case FRX_READY_NDTI:
    case FRX_TRANSPARENT_NDTI:
      /*
       * silently ignore duplicate signal..
       */
      break;
     default:
      TRACE_ERROR( "SIG_PTX_FRX_STOP_FLOW_REQ unexpected" );
      break;
  }

} /* sig_ptx_frx_stop_flow_req() */

/*
+------------------------------------------------------------------------------
| Function    : sig_arb_frx_dti_connected_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_FRX_DTI_CONNECTED_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_frx_dti_connected_req ()
{
  TRACE_ISIG( "sig_arb_frx_dti_connected_req" );

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_DEAD:
      SET_STATE( PPP_SERVICE_FRX, FRX_DEAD_DTI );
      break;

    case FRX_READY_NDTI:
      SET_STATE( PPP_SERVICE_FRX, FRX_READY );
      /*
       * Send a start signal to DTI 
       */
      dti_start(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL);
      break;

    case FRX_TRANSPARENT_NDTI: 
      SET_STATE( PPP_SERVICE_FRX, FRX_TRANSPARENT );
      /*
       * Send a start signal to DTI 
       */
      dti_start(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL);
      break;

    default:
      TRACE_ERROR( "SIG_ARB_FRX_DTI_CONNECTED_REQ unexpected" );
      break;
  }
} /* sig_arb_frx_dti_connected_req() */


/*
+------------------------------------------------------------------------------
| Function    : sig_dti_frx_data_received_ind
+------------------------------------------------------------------------------
| Description : Handles the signal SIG_DTI_FRX_DATA_RECEIVED_IND
|
| Parameters  : dti_data_ind - Ptr. to primitive payload
|
+------------------------------------------------------------------------------
*/

GLOBAL void sig_dti_frx_data_received_ind (T_DTI2_DATA_IND *dti_data_ind)
{
  TRACE_FUNCTION( "sig_dti_frx_data_received_ind" );

  PACCESS(dti_data_ind);

#ifdef PPP_HDLC_TRACE
  {
    T_desc2* trace_desc;
    
    trace_desc = (T_desc2*)dti_data_ind->desc_list2.first;
    while(trace_desc)
    {
      if(trace_desc->len)
      {
        TRACE_EVENT_P4("new desc=0x%08x: first=0x%02x last=0x%02x len=%d", 
                       trace_desc,
                       trace_desc->buffer[0], 
                       trace_desc->buffer[trace_desc->len - 1], 
                       trace_desc->len);
      }
      else
      {
        TRACE_EVENT_P1("new desc=0x%08x: len=0", trace_desc);
      }
      trace_desc = (T_desc2*)trace_desc->next;
    }
  }
#endif /* PPP_HDLC_TRACE */

  switch( GET_STATE( PPP_SERVICE_FRX ) )
  {
    case FRX_READY:
      ppp_data->frx.received_data = (T_desc2*)dti_data_ind->desc_list2.first;
      ppp_data->frx.proceed_data  = 0;

      /*
       * send as many packets to ptx as can be extracted
       * from the one just received
       */
      frx_add_desc();
      frx_send_pack_ready_mode();
      break;

    case FRX_TRANSPARENT:
      ppp_data->frx.received_data = (T_desc2*)dti_data_ind->desc_list2.first;
      ppp_data->frx.proceed_data  = 0;

      /*
       * send as many packets to ptx as can be extracted
       * from the one just received
       */
      frx_detect_frame();
      frx_send_pack_transp_mode();
      break;

    default:
      TRACE_ERROR( "DTI signal unexpected" );
      /*
       * free the data
       */
      arb_discard_packet((T_desc2*)dti_data_ind->desc_list2.first);
      break;
  }
  
  /*
   * free the primitive
   */
  PFREE(dti_data_ind);
} /* sig_dti_frx_data_received_ind() */