view src/g23m-gprs/llc/llc_llmes.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul is part of the entity LLC and implements all
|             functions to handles the incoming process internal signals as
|             described in the SDL-documentation (LLME-statemachine)
+-----------------------------------------------------------------------------
*/

#ifndef LLC_LLMES_C
#define LLC_LLMES_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "llc.h"        /* to get the global entity definitions */
#include "llc_uitxs.h"  /* to get signal interface to UITX */
#include "llc_uirxs.h"  /* to get signal interface to UIRX */
#include "llc_itxs.h"   /* to get signal interface to ITX */
#include "llc_irxs.h"   /* to get signal interface to IRX */
#include "llc_txs.h"    /* to get signal interface to TX */
#include "llc_uf.h"     /* to get signal interface to U */
#include "llc_us.h"     /* to get signal interface to U */


/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_reset_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_RESET_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_reset_ind (void)
{
  T_SAPI sapi;

  TRACE_ISIG( "sig_u_llme_reset_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * ATTENTION:
       * The following loop implies that all SAPIs are odd numbers beginning
       * with 1!
       */
      for (sapi = LL_SAPI_1; sapi <= LL_SAPI_11; sapi += 2)
      {
        SWITCH_LLC (sapi);

        sig_llme_uitx_reset_req();
        sig_llme_uirx_reset_req();

        if ((sapi NEQ LL_SAPI_1) AND (sapi NEQ LL_SAPI_7))
        {
          sig_llme_itx_reset_req();
          sig_llme_irx_reset_req();
        }

        sig_llme_tx_reset_req();
      }
      break;
    default:
      TRACE_ERROR( "SIG_U_LLME_RESET_IND unexpected" );
      break;
  }
} /* sig_u_llme_reset_ind() */

/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_ready_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_READY_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_ready_ind (void)
{
  T_SAPI sapi;

  TRACE_ISIG( "sig_u_llme_ready_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * ATTENTION:
       * The following loop implies that all SAPIs are odd numbers beginning
       * with 1!
       */
      for (sapi = LL_SAPI_1; sapi <= LL_SAPI_11; sapi += 2)
      {
        SWITCH_LLC (sapi);

        sig_llme_tx_ready_req();
      }

      break;
    default:
      TRACE_ERROR( "SIG_U_LLME_READY_IND unexpected" );
      break;
  }
} /* sig_u_llme_ready_ind() */



/*
+------------------------------------------------------------------------------
| Function    : sig_itx_llme_reest_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ITX_LLME_REEST_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
#ifdef CC_CONCEPT
GLOBAL void sig_itx_llme_reest_ind (USHORT error_cause)
#else
GLOBAL void sig_itx_llme_reest_ind (UBYTE error_cause)
#endif
{
  TRACE_ISIG( "sig_itx_llme_reest_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * First stop ABM operation
       */
      sig_llme_irx_abmrel_req();
      sig_llme_itx_abmrel_req();
      sig_llme_tx_flush_req(SERVICE_ITX);

      /*
       * Then initiate connection re-establishment
       */
      {
        PALLOC (llgmm_status_ind, LLGMM_STATUS_IND);/*T_LLGMM_STATUS_IND*/

#ifdef LL_2to1
        llgmm_status_ind->ps_cause.ctrl_value = CAUSE_is_from_llc;
        llgmm_status_ind->ps_cause.value.llc_cause = error_cause;
#else
        llgmm_status_ind->error_cause = error_cause;
#endif

        PSEND (hCommGMM, llgmm_status_ind);
      }

      TRACE_1_INFO("Init re-establishment s:%d", llc_data->current_sapi);
      sig_llme_u_reest_req();
      break;

    default:
      TRACE_ERROR( "SIG_ITX_LLME_REEST_IND unexpected" );
      break;
  }
} /* sig_itx_llme_reest_ind() */


/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_abmest_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_ABMEST_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_abmest_ind (void)
{
  TRACE_ISIG( "sig_u_llme_abmest_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      sig_llme_tx_flush_req (SERVICE_ITX);
      sig_llme_irx_abmest_req();
      sig_llme_itx_abmest_req();
      break;

    default:
      TRACE_ERROR( "SIG_U_LLME_ABMEST_IND unexpected" );
      break;
  }
} /* sig_u_llme_abmest_ind() */




/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_abmrel_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_ABMREL_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_abmrel_ind (void)
{
  TRACE_ISIG( "sig_u_llme_abmrel_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      sig_llme_irx_abmrel_req();
      sig_llme_itx_abmrel_req();
      sig_llme_tx_flush_req(SERVICE_ITX);
      break;

    default:
      TRACE_ERROR( "SIG_U_LLME_ABMREL_IND unexpected" );
      break;
  }
} /* sig_u_llme_abmrel_ind() */