view src/g23m-gprs/sndcp/sndcp_pdp.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_pdp.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity SNDCP and implements all 
|             functions to handles the incoming primitives as described in 
|             the SDL-documentation (PD-statemachine)
+----------------------------------------------------------------------------- 
*/ 

#define ENTITY_SNDCP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "dti.h"

#include "sndcp.h"        /* to get the global entity definitions */
#include "sndcp_f.h"       /* to get the functions to access the global arrays*/

#include "sndcp_sds.h"     /* to get the signals to sd. */


/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : pd_ll_unitdata_ind
+------------------------------------------------------------------------------
| Description : Handles the primitive LL_UNITDATA_IND
|
| Parameters  : *ll_unitdata_ind - Ptr to primitive payload
|
+------------------------------------------------------------------------------
*/
GLOBAL void pd_ll_unitdata_ind ( T_LL_UNITDATA_IND *ll_unitdata_ind )
{ 
  UBYTE sapi_index = 0;


#ifdef FLOW_TRACE
  sndcp_trace_flow_control(FLOW_TRACE_SNDCP, 
                           FLOW_TRACE_DOWN, 
                           FLOW_TRACE_BOTTOM, 
                           FALSE);
#endif
  TRACE_FUNCTION( "pd_ll_unitdata_ind" );

   /*
    * set service instance according to sapi in primitive
    */
  sndcp_get_sapi_index(ll_unitdata_ind->sapi, &sapi_index);
  sndcp_data->pd = & sndcp_data->pd_base[sapi_index];
  
  switch( GET_STATE( PD ) )
  {
    case PD_DEFAULT:
#ifdef SNDCP_TRACE_ALL
      TRACE_EVENT_P1("downlink at LL SAP: %d octets", 
                     ll_unitdata_ind->sdu.l_buf >> 3);

      sndcp_trace_sdu(& ll_unitdata_ind->sdu);

#endif        
      sig_pd_sd_unitdata_ind(ll_unitdata_ind);
      break;
    default:
      TRACE_ERROR( "LL_UNITDATA_IND unexpected" );
      if (ll_unitdata_ind != NULL) {
        PFREE (ll_unitdata_ind);
      }
      break;
  }

} /* pd_ll_unitdata_ind() */