FreeCalypso > hg > fc-tourmaline

view src/g23m-gprs/sndcp/sndcp_sdas.h @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_sdas.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_sdas.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_sdas.h                            $
 * 
 * 8     15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 7     15.05.00 16:16 Hk
 * backup.
 * 
 * 6     9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 5     18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 4     30.03.00 16:04 Hk
 * 
 * 3     17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 2     10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 1     10.03.00 11:43 Hk
 * Initial.
 * 

#endif

#ifndef SNDCP_SDAS_H
#define SNDCP_SDAS_H


EXTERN void sig_cia_sda_cia_decomp_ind(T_CIA_DECOMP_IND* cia_decomp_ind, UBYTE p_id);

EXTERN void sig_mg_sda_end_est (UBYTE sapi, BOOL success);

EXTERN void sig_mg_sda_getdata (UBYTE sapi, UBYTE nsapi);

EXTERN void sig_cia_sda_getdata (UBYTE sapi, UBYTE nsapi);

EXTERN void sig_mg_sda_delete_npdus (UBYTE nsapi,
                                    UBYTE sapi);

EXTERN void sig_mg_sda_reset_ind (UBYTE nsapi);

EXTERN void sig_mg_sda_start_est(UBYTE sapi);

EXTERN void sig_pda_sda_data_ind (T_LL_DATA_IND* ll_data_ind);


EXTERN void sig_nd_sda_getdata_req (UBYTE sapi,
                                       UBYTE nsapi);


#endif /* !SNDCP_SDAS_H */