FreeCalypso > hg > fc-tourmaline

view src/gpf/ccd/ccd_inc.mk @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#----------------------------------------------------------------------------- 
#  Project :  
#  Modul   :  ccd_inc.mk
#----------------------------------------------------------------------------- 
#  Copyright 2002 Texas Instruments Berlin, AG 
#                 All rights reserved. 
# 
#                 This file is confidential and a trade secret of Texas 
#                 Instruments Berlin, AG 
#                 The receipt of or possession of this file does not convey 
#                 any rights to reproduce or disclose its contents or to 
#                 manufacture, use, or sell anything it may describe, in 
#                 whole, or in part, without the specific written consent of 
#                 Texas Instruments Berlin, AG. 
#----------------------------------------------------------------------------- 
# Purpose : Some general definition also used in CCD\util.
#----------------------------------------------------------------------------- 

#-------------------------Suffixes for the name of the output file
#---------e.g. ccd_tr_rt_po_db.lib

ifdef TOOL_CHOICE
  TSDIR:=/ts$(TOOL_CHOICE)
  tsTail  :=_ts$(TOOL_CHOICE)
else
  TSDIR:=
endif

ifeq ($(TRACE), 1)
   trTail :=_tr
   TRACEDIR=/trace
else 
   trTail:=
   TRACEDIR=
endif

ifeq ($(MEMSUPER), 1)
  PSDIR=/ps
  pstail :=_ps
else
  PSDIR=
  pstail:=
endif

ifeq ($(DEBUG), 1)
   DEBUGDIR=/debug
   dbTail :=_db
else 
   DEBUGDIR=
   dbTail:=
endif

SECTION=
secTail=
ifeq ($(RUN_FLASH), 1)
  SECTION=/fl
  secTail:=_fl
endif
ifeq ($(RUN_INT_RAM), 1)
  SECTION=/ir
  secTail:=_ir
endif

ifeq ($(TARGET), nuc)
   tTail :=_na7
   ifeq ($(PLATFORM), arm7)
      tTail :=_na7
      ifeq ($(DYNARR), 1)
        DADIR=/da
        datail :=_da
      else
        DADIR=
        datail:=
      endif
   else
      ifeq ($(PLATFORM), arm9)
         tTail :=_na9
      else
        ifeq ($(PLATFORM), pc)
           tTail :=_npc
        endif #pc
      endif #arm9
   endif #arm7
else
   ifeq ($(TARGET), win32)
     tTail :=_wn
   else
     ifeq ($(TARGET), linuxpc)
      tTail :=_lpc
      OSENV=sus
     else
       ifeq ($(TARGET), rtlpc)
        tTail :=_rlp
        OSENV=sus
        RTL_VERSION=2.0
        RTL_DIR=/opt/rtldk-$(RTL_VERSION)/rtlinuxpro
        include $(RTL_DIR)/rtl.mk
       else
         ifeq ($(TARGET), linuxarm)
          tTail :=_la9
          OSENV=sus
          else
           ifeq ($(TARGET), solsparc)
            tTail :=_ssp
            OSENV=sus
            BYTESEX=motorola
           endif #solsparc
         endif #linuxarm
       endif #rtlpc
     endif #linuxpc
   endif #win32  
endif #nuc

XXX:=$(tTail)$(trTail)$(dbTail)$(pstail)$(datail)$(secTail)$(tsTail)