FreeCalypso > hg > fc-tourmaline
view src/gpf/ccd/csn1_sh_opt.c @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : csn1_sh_opt.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definition of encoding and decoding functions for CSN1_SH_OPT | elements +----------------------------------------------------------------------------- */ /* * standard definitions like GLOBAL, UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes of ccd internal functions */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs); extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs); #ifndef RUN_FLASH /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_csn1_shl_opt_decode | +------------------------------------------------------------------------+ PURPOSE : Decoding of the GSM Type CSN1 SHL OPT element. This coding type enhances the GSM Type CSN1 SHL. It supports previous behaviour of CSN1_SHL and the lack of the whole element. The coding type CSN1_SHL_OPT is suitable for elements which structures match to the following common definition: { null | L | H { 0 | 1 < value part > } The element value can be present, then it is preceded by the flag value H. If the element is represented by the flag L only the value is absent! Besides the absence of the whole element is allowed. */ SHORT cdc_csn1_shl_opt_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_csn1_shl_opt_decode()"); #else TRACE_CCD (globs, "cdc_csn1_shl_opt_decode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif return cdc_csn1_sx_decode (0xFF, e_ref, globs); } #endif /* !RUN_FLASH */ #ifndef RUN_FLASH /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_csn1_shl_opt_encode | +------------------------------------------------------------------------+ PURPOSE : Encoding of the GSM Type CSN1 SHL OPT element doesn't differ from encoding of the GSM Type CSN1 SHL. This element consists of a 1 bit valid flag and a value part. If the element is valid (the v_xxx components is TRUE in the decoded message) a H bit will be coded followed by the coding of the value part. Otherwise a L bit will be coded. */ SHORT cdc_csn1_shl_opt_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_csn1_shl_opt_encode()"); #else TRACE_CCD (globs, "cdc_csn1_shl_opt_encode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif return cdc_csn1_sx_encode (0xFF, e_ref, globs); } #endif /* !RUN_FLASH */