view src/nucleus/sms.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*************************************************************************/
/*                                                                       */
/*               Copyright Mentor Graphics Corporation 2002              */
/*                         All Rights Reserved.                          */
/*                                                                       */
/* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS  */
/* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS   */
/* SUBJECT TO LICENSE TERMS.                                             */
/*                                                                       */
/*************************************************************************/

/*************************************************************************/
/*                                                                       */
/* FILE NAME                                               VERSION       */
/*                                                                       */
/*      sms.c                                          Nucleus PLUS 1.14 */
/*                                                                       */
/* COMPONENT                                                             */
/*                                                                       */
/*      SM - Semaphore Management                                        */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This file contains the supplemental routines for the Semaphore   */
/*      Management component.                                            */
/*                                                                       */
/* DATA STRUCTURES                                                       */
/*                                                                       */
/*      None                                                             */
/*                                                                       */
/* FUNCTIONS                                                             */
/*                                                                       */
/*      SMS_Reset_Semaphore                 Reset semaphore              */
/*                                            terminate condition        */
/*                                                                       */
/* DEPENDENCIES                                                          */
/*                                                                       */
/*      cs_extr.h                           Common Service functions     */
/*      tc_extr.h                           Thread Control functions     */
/*      sm_extr.h                           Semaphore functions          */
/*      hi_extr.h                           History functions            */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*         DATE                    REMARKS                               */
/*                                                                       */
/*      03-01-1994      Created initial version 1.1 from                 */
/*                        routines originally in core                    */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*      04-17-1996      updated to version 1.2                           */
/*      03-24-1998      Released version 1.3.                            */
/*      03-26-1999      Released 1.11m (new release                      */
/*                        numbering scheme)                              */
/*      04-17-2002      Released version 1.13m                           */
/*      11-07-2002      Released version 1.14                            */
/*************************************************************************/
#define         NU_SOURCE_FILE


#include        "cs_extr.h"                 /* Common service functions  */
#include        "tc_extr.h"                 /* Thread control functions  */
#include        "sm_extr.h"                 /* Semaphore functions       */
#include        "hi_extr.h"                 /* History functions         */
#include        "profiler.h"                /* ProView interface         */



/*************************************************************************/
/*                                                                       */
/* FUNCTION                                                              */
/*                                                                       */
/*      SMS_Reset_Semaphore                                              */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This function resets a semaphore back to the initial state.  All */
/*      tasks suspended on the semaphore are resumed with the reset      */
/*      completion status.                                               */
/*                                                                       */
/* CALLED BY                                                             */
/*                                                                       */
/*      Application                                                      */
/*      SMSE_Reset_Semaphore                Error checking shell         */
/*                                                                       */
/* CALLS                                                                 */
/*                                                                       */
/*      [HIC_Make_History_Entry]            Make entry in history log    */
/*      TCC_Resume_Task                     Resume a suspended task      */
/*      [TCT_Check_Stack]                   Stack checking function      */
/*      TCT_Control_To_System               Transfer control to system   */
/*      TCT_System_Protect                  Protect semaphore            */
/*      TCT_Unprotect                       Release protection           */
/*                                                                       */
/* INPUTS                                                                */
/*                                                                       */
/*      semaphore_ptr                       Semaphore control block ptr  */
/*      initial_count                       Initial count to reset the   */
/*                                            semaphore to               */
/*                                                                       */
/* OUTPUTS                                                               */
/*                                                                       */
/*      NU_SUCCESS                                                       */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*         DATE                    REMARKS                               */
/*                                                                       */
/*      03-01-1993      Created initial version 1.0                      */
/*      04-19-1993      Verified version 1.0                             */
/*      03-01-1994      Changed function interface to                    */
/*                        match the prototype, added                     */
/*                        register variable logic,                       */
/*                        optimized protection logic,                    */
/*                        resulting in version 1.1                       */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*                                                                       */
/*************************************************************************/
STATUS  SMS_Reset_Semaphore(NU_SEMAPHORE *semaphore_ptr,
                                                    UNSIGNED initial_count)
{

R1 SM_SCB      *semaphore;                  /* Semaphore control blk ptr */
R2 SM_SUSPEND  *suspend_ptr;                /* Suspend block pointer     */
R3 SM_SUSPEND  *next_ptr;                   /* Next suspend block pointer*/
STATUS          preempt;                    /* Status for resume call    */
NU_SUPERV_USER_VARIABLES

    /* Switch to supervisor mode */
    NU_SUPERVISOR_MODE();

    /* Move input semaphore pointer into internal pointer.  */
    semaphore =  (SM_SCB *) semaphore_ptr;

#ifdef  NU_ENABLE_STACK_CHECK

    /* Call stack checking function to check for an overflow condition.  */
    TCT_Check_Stack();

#endif

#ifdef  NU_ENABLE_HISTORY

    /* Make an entry that corresponds to this function in the system history
       log.  */
    HIC_Make_History_Entry(NU_RESET_SEMAPHORE_ID, (UNSIGNED) semaphore,
                                       (UNSIGNED) initial_count, (UNSIGNED) 0);

#endif

    /* Protect against access to the semaphore.  */
    TCT_System_Protect();

    /* Pickup the suspended task pointer list.  */
    suspend_ptr =  semaphore -> sm_suspension_list;

    /* Walk the chain task(s) currently suspended on the semaphore.  */
    preempt =  0;
    while (suspend_ptr)
    {

        /* Resume the suspended task.  Insure that the status returned is
           NU_SEMAPHORE_RESET.  */
        suspend_ptr -> sm_return_status =  NU_SEMAPHORE_RESET;

        /* Point to the next suspend structure in the link.  */
        next_ptr =  (SM_SUSPEND *) (suspend_ptr -> sm_suspend_link.cs_next);

        /* Resume the specified task.  */
        preempt =  preempt |
                TCC_Resume_Task((NU_TASK *) suspend_ptr -> sm_suspended_task,
                                                NU_SEMAPHORE_SUSPEND);

        /* Determine if the next is the same as the current pointer.  */
        if (next_ptr == semaphore -> sm_suspension_list)

            /* Clear the suspension pointer to signal the end of the list
               traversal.  */
            suspend_ptr =  NU_NULL;
        else

            /* Move the next pointer into the suspend block pointer.  */
            suspend_ptr =  next_ptr;
    }

    /* Initialize the semaphore.  */
    semaphore -> sm_semaphore_count =  initial_count;
    semaphore -> sm_tasks_waiting =    0;
    semaphore -> sm_suspension_list =  NU_NULL;

#ifdef INCLUDE_PROVIEW
    _RTProf_DumpSema(RT_PROF_RESET_SEMAPHORE,(SM_SCB *) semaphore, RT_PROF_OK);
#endif

    /* Determine if preemption needs to occur.  */
    if (preempt)

        /* Transfer control to system to facilitate preemption.  */
        TCT_Control_To_System();

    /* Release protection against access to the semaphore.  */
    TCT_Unprotect();

    /* Return to user mode */
    NU_USER_MODE();

    /* Return a successful completion.  */
    return(NU_SUCCESS);
}