FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/m_sat.val @ 107:6bcaf6e7dad2
mmiDummy.h: bogotab fixes
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 08 Nov 2020 23:13:33 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_sat.val | | SOURCE : "msg\sat.mdf" | | LastModified : "2003-02-25" | | IdAndVersion : "6147.609.99.011" | | SrcFileTime : "Wed Nov 28 10:21:04 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_SAT_VAL #define M_SAT_VAL #define CDG_ENTER__M_SAT_VAL #define CDG_ENTER__FILENAME _M_SAT_VAL #define CDG_ENTER__M_SAT_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_SAT_VAL__LAST_MODIFIED _2003_02_25 #define CDG_ENTER__M_SAT_VAL__ID_AND_VERSION _6147_609_99_011 #define CDG_ENTER__M_SAT_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_04_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__M_SAT_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cmd_typ */ #define SAT_CMD_REFRESH (0x1) /* Refresh command */ #define SAT_CMD_MORE_TIME (0x2) /* More time command */ #define SAT_CMD_POLL_INTERVAL (0x3) /* Poll interval command */ #define SAT_CMD_POLL_OFF (0x4) /* Polling off command */ #define SAT_CMD_EVENT_LIST (0x5) /* Setup event list command */ #define SAT_CMD_SETUP_CALL (0x10) /* Set up call command */ #define SAT_CMD_SEND_SS (0x11) /* Send SS command */ #define SAT_CMD_SEND_USSD (0x12) /* Send USSD Command */ #define SAT_CMD_SEND_SMS (0x13) /* Send Short Message command */ #define SAT_CMD_SEND_DTMF (0x14) /* Send DTMF command */ #define SAT_CMD_LAUNCH_BROWSER (0x15) /* Launch WWW Browser class c */ #define SAT_CMD_PLAY_TONE (0x20) /* Play tone command */ #define SAT_CMD_DISPLAY_TEXT (0x21) /* Display text command */ #define SAT_CMD_GET_INKEY (0x22) /* Get inkey command */ #define SAT_CMD_GET_INPUT (0x23) /* Get input command */ #define SAT_CMD_SEL_ITEM (0x24) /* Select item command */ #define SAT_CMD_SETUP_MENU (0x25) /* Set up menu command */ #define SAT_CMD_PROV_LOC_INFO (0x26) /* Provide loacal information command */ #define SAT_CMD_TIMER_MNG (0x27) /* Timer Managemant command */ #define SAT_CMD_IDLE_TEXT (0x28) /* Set up idle mode text command */ #define SAT_CMD_RUN_AT (0x34) /* Run AT command */ #define SAT_CMD_OPEN_CHANNEL (0x40) /* Open data channel for CS or GPRS class e */ #define SAT_CMD_CLOSE_CHANNEL (0x41) /* Close data channel class e */ #define SAT_CMD_RECEIVE_DATA (0x42) /* Receive data from ME from the channel class e */ #define SAT_CMD_SEND_DATA (0x43) /* Send the data to the channel via ME class e */ #define SAT_CMD_GET_CHANNEL_STATUS (0x44) /* Get the status of the data channel opened class e */ #define SAT_CMD_END_SESSION (0x81) /* End of proactive session command */ /* * Value constants for VAL_cmd_qlf */ #define QLF_RFSH_INIT (0x0) /* Refresh: SIM initialization */ #define QLF_RFSH_INIT_FULL_CHNG_NTFY (0x1) /* Refresh: SIM initialization and full file change notification */ #define QLF_RFSH_FILE_CHNG_NTFY (0x2) /* Refresh: File change notification */ #define QLF_RFSH_INIT_FILE_CHNG_NTFY (0x3) /* Refresh: SIM initialization and file change notification */ #define QLF_RFSH_RESET (0x4) /* Refresh: SIM reset */ #define QLF_CALL_IDLE (0x0) /* Set up call: idle */ #define QLF_CALL_IDLE_RDL (0x1) /* Set up call: idle with redial */ #define QLF_CALL_HOLD (0x2) /* Set up call: hold */ #define QLF_CALL_HOLD_RDL (0x3) /* Set up call: hold with redial */ #define QLF_CALL_DISC (0x4) /* Set up call: disconnect */ #define QLF_CALL_DISC_RDL (0x5) /* Set up call: disconnect with redial */ #define QLF_SMS_NO_PACK (0x0) /* Send SMS: packing not required */ #define QLF_SMS_PACK (0x1) /* Send SMS: packing required */ #define QLF_DISP_PRIO_NORM (0x0) /* Display text: normal priority */ #define QLF_DISP_PRIO_HIGH (0x1) /* Display text: high priority */ #define QLF_DISP_CLR_DELAY (0x0) /* Display text: clear message after delay */ #define QLF_DISP_CLR_USER (0x80) /* Display text: wait for user to clear message */ #define QLF_INKY_DIGITS (0x0) /* Get inkey: digits (0-9, *,# and +) only */ #define QLF_INKY_ALPHA (0x1) /* Get inkey: alphabet set */ #define QLF_INKY_SMS_DEF (0x0) /* Get inkey; SMS default alphabet */ #define QLF_INKY_UCS2 (0x2) /* Get inkey: UCS2 alphabet */ #define QLF_INKY_NO_HELP (0x0) /* Get inkey: no help information available */ #define QLF_INKY_HELP (0x80) /* Get inkey: help information available */ #define QLF_INPT_DIGITS (0x0) /* Get input: digits (0-9, *,# and +) only */ #define QLF_INPT_ALPHA (0x1) /* Get input: alphabet set */ #define QLF_INPT_SMS_DEF (0x0) /* Get input; SMS default alphabet */ #define QLF_INPT_UCS2 (0x2) /* Get input: UCS2 alphabet */ #define QLF_INPT_ECHO (0x0) /* Get input: ME may echo input */ #define QLF_INPT_NO_ECHO (0x4) /* Get input: input shall not revealed in any way */ #define QLF_INPT_NO_PACK (0x0) /* Get input: unpacket input format */ #define QLF_INPT_PACK (0x8) /* Get input: SMS packed input format */ #define QLF_INPT_NO_HELP (0x0) /* Get input: no help information available */ #define QLF_INPT_HELP (0x80) /* Get input: help information available */ #define QLF_SITM_NOPRES (0x0) /* Select item: presentation type is not specified */ #define QLF_SITM_PRES (0x1) /* Select item: presentation type is specified in bit 2 */ #define QLF_SITM_CHVAL (0x0) /* Select item: presentation as a choice of data values if bit 1 = '1' */ #define QLF_SITM_CHNAV (0x2) /* Select item: presentation as a choice of navigation options if bit 1 is '1' */ #define QLF_SITM_SEL_NOPREF (0x0) /* Select item: no selection preference */ #define QLF_SITM_SEL_PREF_SOFTKEY (0x4) /* Select item: selection using soft key preferred */ #define QLF_SITM_NO_HELP (0x0) /* Select item: no help information available */ #define QLF_SITM_HELP (0x80) /* Select item: help information available */ #define QLF_SMNU_SEL_NOPREF (0x0) /* Set up menu: no selection preference */ #define QLF_SMNU_SEL_PREF_SOFTKEY (0x1) /* Set up menu: selection using soft key preferred */ #define QLF_SMNU_NO_HELP (0x0) /* Set up menu: no help information available */ #define QLF_SMNU_HELP (0x80) /* Set up menu: help information available */ #define QLF_PLOI_LOC_INFO (0x0) /* Provide local information: Local information */ #define QLF_PLOI_IMEI (0x1) /* Provide local information: IMEI of ME */ #define QLF_PLOI_NTW_MSR (0x2) /* Provide local information: Network measurement results */ #define QLF_PLOI_DTT (0x3) /* Provide local information: Date, Time and Timezone */ #define QLF_PLOI_LANG_SET (0x4) /* Provide local information: Language Setting */ #define QLF_PLOI_TIM_ADV (0x5) /* Provide local information: Timing Advance */ #define QLF_LABR_IF_NOT_LCHD (0x0) /* Launch Browser: launch browser, if not already launched */ #define QLF_LABR_NOT_USED1 (0x2) /* Launch Browser: not used */ #define QLF_LABR_USE_EXISTING (0x2) /* Launch Browser: use the existing browser */ #define QLF_LABR_CLOSE_AND_NEW (0x3) /* Launch Browser: close the existing browser session and launch new browser session */ #define QLF_LABR_NOT_USED2 (0x4) /* Launch Browser: not used */ #define QLF_OPCH_ON_DEMD_LINK_EST (0x0) /* Open Channel: on demand link establishment (class e) */ #define QLF_OPCH_IMMDT_LINK_EST (0x1) /* Open Channel: immediate link establishment (class e) */ #define QLF_OPCH_NO_AUTO_RECONNECT (0x0) /* Open Channel: no automatic reconnection (class e) */ #define QLF_OPCH_AUTO_RECONNECT (0x2) /* Open Channel: automatic reconnection (class e) */ #define QLF_SNDDAT_TX (0x0) /* Send Data: store data in Tx buffer (class e) */ #define QLF_SNDDAT_IM (0x1) /* Send Data: Send data immediately (class e) */ /* * Value constants for VAL_src_dev */ #define DEV_SRC_KBD (0x1) /* Device keypad */ #define DEV_SRC_DSP (0x2) /* Device display */ #define DEV_SRC_EAR (0x3) /* Device earpiece */ #define DEV_SRC_CDR0 (0x10) /* Device Additional Card Reader 0 */ #define DEV_SRC_CDR1 (0x11) /* Device Additional Card Reader 1 */ #define DEV_SRC_CDR2 (0x12) /* Device Additional Card Reader 2 */ #define DEV_SRC_CDR3 (0x13) /* Device Additional Card Reader 3 */ #define DEV_SRC_CDR4 (0x14) /* Device Additional Card Reader 4 */ #define DEV_SRC_CDR5 (0x15) /* Device Additional Card Reader 5 */ #define DEV_SRC_CDR6 (0x16) /* Device Additional Card Reader 6 */ #define DEV_SRC_CDR7 (0x17) /* Device Additional Card Reader 7 */ #define DEV_SRC_CH1 (0x21) /* Device Channel 1 (class e) */ #define DEV_SRC_CH2 (0x22) /* Device Channel 2 (class e) */ #define DEV_SRC_CH3 (0x23) /* Device Channel 3 (class e) */ #define DEV_SRC_CH4 (0x24) /* Device Channel 4 (class e) */ #define DEV_SRC_CH5 (0x25) /* Device Channel 5 (class e) */ #define DEV_SRC_CH6 (0x26) /* Device Channel 6 (class e) */ #define DEV_SRC_CH7 (0x27) /* Device Channel 7 (class e) */ #define DEV_SRC_SIM (0x81) /* Device SIM */ #define DEV_SRC_ME (0x82) /* Device mobile equipment */ #define DEV_SRC_NTW (0x83) /* Device network */ /* * Value constants for VAL_dest_dev */ #define DEV_DST_KBD (0x1) /* Device keypad */ #define DEV_DST_DSP (0x2) /* Device display */ #define DEV_DST_EAR (0x3) /* Device earpiece */ #define DEV_DST_CDR0 (0x10) /* Device Additional Card Reader 0 */ #define DEV_DST_CDR1 (0x11) /* Device Additional Card Reader 1 */ #define DEV_DST_CDR2 (0x12) /* Device Additional Card Reader 2 */ #define DEV_DST_CDR3 (0x13) /* Device Additional Card Reader 3 */ #define DEV_DST_CDR4 (0x14) /* Device Additional Card Reader 4 */ #define DEV_DST_CDR5 (0x15) /* Device Additional Card Reader 5 */ #define DEV_DST_CDR6 (0x16) /* Device Additional Card Reader 6 */ #define DEV_DST_CDR7 (0x17) /* Device Additional Card Reader 7 */ #define DEV_DST_CH1 (0x21) /* Device Channel 1 (class e) */ #define DEV_DST_CH2 (0x22) /* Device Channel 2 (class e) */ #define DEV_DST_CH3 (0x23) /* Device Channel 3 (class e) */ #define DEV_DST_CH4 (0x24) /* Device Channel 4 (class e) */ #define DEV_DST_CH5 (0x25) /* Device Channel 5 (class e) */ #define DEV_DST_CH6 (0x26) /* Device Channel 6 (class e) */ #define DEV_DST_CH7 (0x27) /* Device Channel 7 (class e) */ #define DEV_DST_SIM (0x81) /* Device SIM */ #define DEV_DST_ME (0x82) /* Device mobile equipment */ #define DEV_DST_NTW (0x83) /* Device network */ /* * Value constants for VAL_time_unit */ #define TU_MIN (0x0) /* Minutes */ #define TU_SEC (0x1) /* Seconds */ #define TU_100_MSEC (0x2) /* Tenth of seconds */ /* * Value constants for VAL_noa */ #define VAL_NOA___DEF (0x0) /* Reserved */ #define NOA_UNKNOWN (0x0) /* unknown */ #define NOA_INTER_NUM (0x1) /* international number */ #define NOA_NATIO_NUM (0x2) /* national significant number */ #define NOA_NETW_NUM (0x3) /* network specific number */ #define NOA_SUBSC_NUM (0x4) /* subscriber number */ #define NOA_ABBRV_NUM (0x6) /* abbreviated number */ /* * Value constants for VAL_npi */ #define VAL_NPI___DEF (0x0) /* reserved */ #define NPI_UNKNOWN (0x0) /* unknown */ #define NPI_ISDN (0x1) /* ISDN/Telephony Numbering Plan (Rec CCITT E.164) */ #define NPI_X121 (0x3) /* data numbering plan (CCITT Rec X.121) */ #define NPI_F69 (0x4) /* telex numbering plan (CCITT Rec F.69) */ #define NPI_LAND_MOBILE (0x6) /* land mobile numbering plan (CCITT Rec E.212) */ #define NPI_NATIONAL (0x8) /* land mobile numbering plan (CCITT Rec E.212) */ #define NPI_PRIVATE (0x9) /* Private numbering plan */ /* * Value constants for VAL_gen */ #define RSLT_PERF_SUCCESS (0x0) /* Command performed successfully */ #define RSLT_PERF_PART_CMPR (0x1) /* Command performed with partial comprehension */ #define RSLT_PERF_MISS_INFO (0x2) /* Command performed with missing information */ #define RSLT_RFSH_ADD_EF (0x3) /* Refresh performed with additional EF read */ #define RSLT_PERF_MDFY_SIM (0x5) /* Command performed but modified by SIM */ #define RSLT_PERF_LIM_SRV (0x6) /* Command performed successfully, limited service */ #define RSLT_PERF_MDFIED (0x7) /* Command performed with modification (class e) */ #define RSLT_SESS_USR_TERM (0x10) /* Proactive SIM session terminated by user */ #define RSLT_SESS_USR_BACK (0x11) /* Backward move in proactive SIM session */ #define RSLT_NO_RESP (0x12) /* No response from user */ #define RSLT_HELP_USR_REQ (0x13) /* Help information required by user */ #define RSLT_USER_TERM_SS (0x14) /* SS or USSD transaction terminated by user */ #define RSLT_ME_UNAB_PROC (0x20) /* ME is unable to process command */ #define RSLT_NTW_UNAB_PROC (0x21) /* Network is unable to process command */ #define RSLT_USR_REJ (0x22) /* User did not accept set up request */ #define RSLT_USR_CLR_DWN (0x23) /* User cleared down call before connection or network release */ #define RSLT_CC_SIM_TMP (0x25) /* Interaction with call control by SIM temporary problem */ #define RSLT_LABRWS_GENERIC (0x26) /* Launch browser generic error code (class e) */ #define RSLT_ME_CAP (0x30) /* Command beyond ME capabilities */ #define RSLT_UNKN_TYPE (0x31) /* Command type not understood */ #define RSLT_UNKN_DATA (0x32) /* Command data not understood */ #define RSLT_UNKN_NR (0x33) /* Command number not understood */ #define RSLT_SS_ERR (0x34) /* SS return error */ #define RSLT_SMS_ERR (0x35) /* SMS RP-ERROR */ #define RSLT_ERR_REQ_VAL (0x36) /* Error, required values are missing */ #define RSLT_USSD_ERR (0x37) /* USSD return error */ #define RSLT_CC_SIM_PRM (0x39) /* interaction with call control by SIM or SMS control by SIM permanent problem */ #define RSLT_BEARIND_PERR (0x3a) /* Bearer Independent Protocol error (class e) */ /* * Value constants for VAL_add */ #define ADD_NO_CAUSE (0x0) /* No specific cause can be given */ #define ADD_ME_SCR_BUSY (0x1) /* ME: Screen is busy */ #define ADD_ME_CALL_BUSY (0x2) /* ME: currently busy on call */ #define ADD_ME_SS_BUSY (0x3) /* ME: currently busy on SS transaction */ #define ADD_ME_NO_SERV (0x4) /* ME: no service */ #define ADD_ME_ACC_BAR (0x5) /* ME: Access control class bar */ #define ADD_ME_RR_DENIED (0x6) /* ME: Radio resource not granted */ #define ADD_ME_NO_SPCH_CALL (0x7) /* ME: Not in speech call */ #define ADD_ME_USSD_BUSY (0x8) /* ME: currently busy on USSD transaction */ #define ADD_CC_NOT_ALLWD (0x1) /* Call Control: Action not allowed */ #define ADD_CC_REQ_CHNG (0x2) /* Call Control: Type of request has changed */ #define ADD_LBP_BEARR_NAVAIL (0x1) /* Launch browser: Bearer unavailable (class c) */ #define ADD_LBP_BRWSR_NAVAIL (0x2) /* Launch browser: Browser unavailable (class c) */ #define ADD_LBP_ME_UNABL_RDPD (0x3) /* Launch browser: ME unable to read provisioning data (class c) */ #define ADD_BIP_NO_CHAN_AVAIL (0x1) /* No channel available (class e) */ #define ADD_BIP_CHAN_CLOSD (0x2) /* Channel closed (class e) */ #define ADD_BIP_CHANID_NT_VLD (0x3) /* Channel identifier not valid (class e) */ #define ADD_BIP_BUF_SIZ_NAVAIL (0x4) /* Requested buffer size not available (class e) */ #define ADD_BIP_SECUR_ERR (0x5) /* Security error (unsuccessful authentication) (class e) */ #define ADD_BIP_SIME_ITL_NAVAIL (0x6) /* Requested SIM/ME interface transport level not available (class e) */ /* * Value constants for VAL_tos */ #define VAL_TOS___DEF (0x0) /* Reserved */ #define TOS_X213 (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER (0x2) /* User Specified */ /* * Value constants for VAL_oei */ #define OEI_EVEN (0x0) /* even number of address signals */ #define OEI_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_event */ #define VAL_EVENT___DEF (0x0) /* Reserved */ #define EVENT_MT_CALL (0x0) /* Incoming Call */ #define EVENT_CALL_CONN (0x1) /* Call is connected */ #define EVENT_CALL_DISC (0x2) /* Call is disconnected */ #define EVENT_LOC_STATUS (0x3) /* Service status change */ #define EVENT_USER_ACTIVE (0x4) /* User activity */ #define EVENT_IDLE_SCREEN (0x5) /* Idle screen is available */ #define EVENT_BROWS_TERMIN (0x8) /* Browser Termination (if class c supported) */ #define EVENT_DATA_AVAIL (0x9) /* Data available (if class e supported) */ #define EVENT_CHAN_STAT (0xa) /* Channel Status (if class e supported) */ /* * Value constants for VAL_bc_rpi */ #define VAL_BC_RPI___DEF (0x0) /* Reserved */ #define BC_RPI_ALT (0x1) /* Alternate mode */ #define BC_RPI_SEQ (0x3) /* Sequential mode */ /* * Value constants for VAL_loc_state */ #define VAL_LOC_STATE___DEF (0x0) /* Reserved */ #define LOC_ST_NORMAL (0x1) /* Normal service */ #define LOC_ST_LIMITED (0x2) /* Limited service */ #define LOC_ST_NOSERV (0x3) /* No service */ /* * Value constants for VAL_gprs_pdp_type */ #define PDP_TYPE_IP (0x2) /* Internet Protocol, IETF STD 5 */ /* * Value constants for VAL_oth_addr_type */ #define VAL_OTH_ADDR_TYPE___DEF (0x0) /* reserved */ #define IPv4 (0x21) /* Internet Protocal vers.4 */ #define IPv6 (0x57) /* Internet Protocal vers.6 */ /* * Value constants for VAL_trans_prot_type */ #define VAL_TRANS_PROT_TYPE___DEF (0x0) /* reserved */ #define UDP (0x1) /* User Datagramm Protocol */ #define TCP (0x2) /* Transmission Control Protocol */ /* * Value constants for VAL_browser */ #define VAL_BROWSER___DEF (0x0) /* reserved */ #define DEFAULT_BROWSER (0x0) /* Default browser usage */ /* * Value constants for VAL_bearer */ #define VAL_BEARER___DEF (0x0) /* reserved */ #define B_SMS (0x0) /* short message service */ #define B_CSD (0x1) /* circle switched data */ #define B_USSD (0x2) /* unstructured supplementary service data */ #define B_GPRS (0x3) /* generel packet radio systeme */ /* * Value constants for VAL_brows_term_s */ #define USER_TERMINATION (0x0) /* terminated by user action */ #define ERROR_TERMINATION (0x1) /* terminated by error */ /* * Value constants for VAL_chan_id */ #define NO_CHAN_AVAIL (0x0) #define CHANNEL_ID_1 (0x1) #define CHANNEL_ID_2 (0x2) #define CHANNEL_ID_3 (0x3) #define CHANNEL_ID_4 (0x4) #define CHANNEL_ID_5 (0x5) #define CHANNEL_ID_6 (0x6) #define CHANNEL_ID_7 (0x7) /* * Value constants for VAL_chan_stat_inf1 */ #define VAL_CHAN_STAT_INF1___DEF (0x0) /* reserved */ /* * Value constants for VAL_chan_stat_link */ #define LINK_NO_ESTABL (0x0) /* link not established or PDP context not activated */ #define LINK_ESTABL (0x1) /* link established or PDP context activated */ /* * Value constants for VAL_chan_stat_inf2 */ #define VAL_CHAN_STAT_INF2___DEF (0x0) /* reserved */ #define NO_FURTH_INFO (0x0) /* no further info can be given */ #define VAL_CHAN_STAT_INF2___1 (0x1) /* reserved */ #define VAL_CHAN_STAT_INF2___2 (0x2) /* reserved */ #define VAL_CHAN_STAT_INF2___3 (0x3) /* reserved */ #define VAL_CHAN_STAT_INF2___4 (0x4) /* reserved */ #define LINK_DROPPED (0x5) /* link dropped */ /* * Value constants for VAL_bear_type */ #define BT_CSD (0x1) /* bearer type CSD */ #define BT_GPRS (0x2) /* bearer type GPRS */ #define BT_DEFAULT (0x3) /* default bearer parameters */ /* * user defined constants */ #define MAX_PARTY_NUM_SAT (0x1e0) #define MAX_SUBADDR_NUM (0x14) #define MAX_CH_DATA_LEN (0xf1) #define MAX_CMD_AT_LEN (0xf1) #define MAX_ALPHA_ID_LEN (0xf1) #define MAX_SS_STRING_LEN (0x3c) #define MAX_SAT_USSD_LEN (0xa0) #define MAX_SMS_DIGIT_LEN (0x14) #define MAX_SMS_TPDU_LEN (0xb8) #define MAX_CAP_CNF_LEN (0x70) #define MAX_TEXT_LEN (0xa0) #define MAX_EVENT_LIST_LEN (0xa) #define MAX_TI_LEN (0x10) #define MAX_DTMF_LEN (0x50) #define MAX_PROV_F_PATH_LEN (0x10) #define MAX_BEARER_LIST_LEN (0xfd) #define MAX_CAUSE_LEN (0x1e) #define CCR_ALLW_NO_MDFY (0x0) #define CCR_NOT_ALLW (0x1) #define CCR_ALLW_WITH_MDFY (0x2) #define MAX_SAT_APN_LEN (0x66) #define MAX_URL_LEN (0xfd) #define MAX_PFP_ELEM (0xa) #include "CDG_LEAVE.h" #endif