startup sync logic rework for the new PWON button boot scheme Previously we added logic to the MMI task to hold off PEI init until R2D is running, and then extended that condition to wait for FCHG init too. However, the dependencies of MMI upon R2D and FCHG don't start until mmiInit(), and that call is driven by Switch_ON() code, hence the wait for R2D and FCHG init can be made in that code path instead of the MMI task. Furthermore, with our new way of signaling PWON button boot to MMI, we need a new wait to ensure that the MMI task is up - previously this assurance was provided by the wait for Kp pointers to be set. Solution: revert our previous PEI init hold-off additions to MMI, add a new flag indicating MMI task init done, and put the combined wait for all needed conditions into our new PWON button boot code in power.c.

/*
 *        Filename l1audio_abb.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 *
 */

#define ABB_L1_WRITE(addr,data) (((data) << 6) | (addr) | 0x01)

void ABB_CAL_UlVolume     (UWORD8 pga_index);
void ABB_CAL_DlVolume     (UWORD8 volume_index, UWORD8 pga_index);
void ABB_UlVolume         (UWORD8 volume_index);
void ABB_DlVolume         (UWORD8 volume_index);
void ABB_DlMute           (BOOL mute);
void ABB_SideTone         (UWORD8 volume_index);
void ABB_Audio_Config     (UWORD16 data);
void ABB_Audio_Config_2   (UWORD16 data); 
void ABB_UlMute           (BOOL mute);
void ABB_Audio_Control    (UWORD16 data);
void ABB_Audio_On_Off     (UWORD16 data);
void ABB_Audio_Volume     (UWORD16 data);
void ABB_Audio_PLL        (UWORD16 data);
void ABB_Audio_VBPop      (UWORD16 data);
void ABB_Audio_Delay_Init (UWORD8 delay);