FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tm_include/l1tm_ver.h @ 223:740a8e8fc9d7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
startup sync logic rework for the new PWON button boot scheme Previously we added logic to the MMI task to hold off PEI init until R2D is running, and then extended that condition to wait for FCHG init too. However, the dependencies of MMI upon R2D and FCHG don't start until mmiInit(), and that call is driven by Switch_ON() code, hence the wait for R2D and FCHG init can be made in that code path instead of the MMI task. Furthermore, with our new way of signaling PWON button boot to MMI, we need a new wait to ensure that the MMI task is up - previously this assurance was provided by the wait for Kp pointers to be set. Solution: revert our previous PEI init hold-off additions to MMI, add a new flag indicating MMI task init done, and put the combined wait for all needed conditions into our new PWON button boot code in power.c.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 27 Apr 2021 06:24:52 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1TM_VER.H
 *
 *        Filename l1tm_ver.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

/*****************************/
/* Test mode version numbers */
/*****************************/


//#define    TESTMODEVERSION  0x0300L // All previous TestMode versions pertain to
                                    // GGT Protocol version 2.0, which has been replaced
                                    // by version 3.0.

//#define    TESTMODEVERSION  0x0320L // AFC Params part of "rftw"; APCDEL intialized in "tm_init"; New fcn "l1tm_initialize_var" to switch to TestMode
                                    // Uplink-only tests loop count; RACH loop count; Dedicated mode Pass/Fail stats updated
                                    // New structure "T_TM_RETURN_ABBREV"; Continous TX/RX; New fcn "tmstats_auto_result_reset_loops";
                                    // Corrected BSIC reporting problem; Power skip fcn implemented ("rftw/rftr 16"); A-F Loopback modes supported;
                                    // Chan. monitoring while in dedic. mode possible; FB26/D_BAMS_MEAS tasks enabled only with chan. monitoring;
                                    // New fcn "tmstats_mon_confirm"; RF struct incorporates new TX descriptor table;
                                    // AGC includes lna_off bit (least-significant bit); agc_, afc_ & adc_enable part of l1_config struct;
                                    // Variable number of guard bits in "l1tm_fill_burst"......
//#define    TESTMODEVERSION  0x0321L // Implemented FRAME_NUMBER in l1tm_stats_read(). Timing advance takes effect immediately. stats_read reports 16 or 32 bit values only.
                                    // Only one uplink message sent. Some indices in l1tm_version_get implemented. AGC gain and lna_off set only once to save instruction cycles.
                                    // Cleaned up enums in l1_tm_types.h. Removed case STANDARD from rf_param_read. 
                                    // Updated all argument types of testmode functions according to TM100 v3.2.1. Changed mem_read to support reception of page and 
                                    // register values in one 16-bit value from PCTM.  mem_read can read up to 124 bytes. Changed the TestMode primitive structure to include
                                    // only 2 generic ones plus mem_write and mem_read.

//#define    TESTMODEVERSION  0x0400L // REQ991:
                                    // - SIMULATION for test mode => new non-regression flow regress_tm.bat
                                    // - Rework of test mode state machines to make them independent from each other
                                    // - Rework of simulated upper layers (L3,CST) to be able to run L1 scenarios with TESTMODE=3
                                    // Correction of BUG989, BUG990, BUG992

//#define    TESTMODEVERSION  0x0401L // Merge with TM version 0x321

//#define    TESTMODEVERSION  0x0402L // TM rework PART II
//#define    TESTMODEVERSION  0x0403L // Alignment with TM100 v.3.5.0
                                    // Implementation of new functionality: single PM on monitor channel (rfe 15)
//#define    TESTMODEVERSION  0x0404L // Closed REQ01129: Implementation of GPRS test mode
//#define    TESTMODEVERSION  0x0405L // Alignment with SSA 5.3.3, 
                                      // Correction of BUG2048, BUG2050, BUG2294, BUG2295
#define    TESTMODEVERSION  0x0406L   // REQ03410


//#define    TMAPIVERSION     0x0350L  // New: TM API version (TM100 version number)
//#define    TMAPIVERSION     0x0360L  // TM100 change for GPRS test mode
//#define    TMAPIVERSION     0x0361L  // tm patch 361 for SW version 520
//#define    TMAPIVERSION     0x0362L  // tm patch 362 for SW version 531
#define    TMAPIVERSION     0x0370L  // Multi-band support