view src/g23m-aci/aci/psa_ipas.c @ 223:740a8e8fc9d7

startup sync logic rework for the new PWON button boot scheme Previously we added logic to the MMI task to hold off PEI init until R2D is running, and then extended that condition to wait for FCHG init too. However, the dependencies of MMI upon R2D and FCHG don't start until mmiInit(), and that call is driven by Switch_ON() code, hence the wait for R2D and FCHG init can be made in that code path instead of the MMI task. Furthermore, with our new way of signaling PWON button boot to MMI, we need a new wait to ensure that the MMI task is up - previously this assurance was provided by the wait for Kp pointers to be set. Solution: revert our previous PEI init hold-off additions to MMI, add a new flag indicating MMI task init done, and put the combined wait for all needed conditions into our new PWON button boot code in power.c.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 27 Apr 2021 06:24:52 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_IPAS
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
#if defined (FF_WAP) || defined (FF_SAT_E)

#ifndef PSA_IPAS_C
#define PSA_IPAS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "aci.h"
#include "psa.h"
//#include "psa_l2r.h"
#include "psa_cc.h"
#include "aci_fd.h"
#include "cmh.h"
#include "dti_conn_mng.h"
//#include "cmh_l2r.h"

#include "wap_aci.h"
#include "psa_tcpip.h"

#ifdef GPRS
#include "gaci.h"
#include "cmh_sm.h"
#endif

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPA                      |
|                            ROUTINE : psaIPA_Config                |
+-------------------------------------------------------------------+

  PURPOSE : Configurate or disconfigurate IPA.

*/

GLOBAL void psaIPA_Config(ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc
                      /*T_ACI_AT_CMD at_cmd */)
{
                  /* dirc = IPA_CONN if IPA is to be activated
                     dirc = IPA_DSC if IPA i to be deactivated */

  TRACE_FUNCTION("psaIPA_Config()") ;

  switch( dirc )
  {

  case ( IPA_CONN ):
    wap_state = IPA_Configuration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = ip;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_UP;
      ipa_config_req -> mtu = max_trans_unit;

      PSENDX(IP,ipa_config_req);
    }
    break;

  case ( IPA_DSC ):
    wap_state = IPA_Deconfiguration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = 0;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_DOWN;
      ipa_config_req -> mtu = 0;

      PSENDX(IP,ipa_config_req);
    }
    break;
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPAS                     |
|                            ROUTINE : psaIPA_Dti_Req               |
+-------------------------------------------------------------------+

  PURPOSE : connect IP

*/

GLOBAL void psaIPA_Dti_Req(ULONG link_id, UBYTE peer_to_connect_to, UBYTE dti_conn)
{

  PALLOC( ipa_dti_req, IPA_DTI_REQ);

  

#ifdef GPRS
  T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = NULL;
    
  p_pdp_context_node = pdp_context_find_node_from_cid( work_cids[cid_pointer]);

  if( p_pdp_context_node )
  {
    p_pdp_context_node->internal_data.link_id = link_id;
  }

  /* This is probably not the right place to populate the link id since
     IPA dti req might be sent for CSD call as well ! Need to investigate
     as separate issue.
  */
#endif /* GPRS */

  TRACE_FUNCTION("psaIPA_Dti_Req");

  ipa_dti_req -> dti_conn  = dti_conn;
  ipa_dti_req -> link_id   = link_id;

  if (dti_conn EQ IPA_CONNECT_DTI)
  {
    switch( peer_to_connect_to )
    {
    case( DTI_ENTITY_UDP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_UDP].name);
      break;
#ifdef GPRS
    case( DTI_ENTITY_SNDCP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SNDCP].name);
      break;
#endif
    case( DTI_ENTITY_PPPC ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_PPPC].name);
      break;
    default:
      TRACE_EVENT("unknown conn_peer_Id: IPA_DTI_REQ not sent");
      PFREE(ipa_dti_req);
      return;
    }
  }

  PSENDX( IP, ipa_dti_req );
}


#endif /* WAP || SAT E */