FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/alr2/alr_csf.c @ 223:740a8e8fc9d7
startup sync logic rework for the new PWON button boot scheme
Previously we added logic to the MMI task to hold off PEI init until
R2D is running, and then extended that condition to wait for FCHG
init too. However, the dependencies of MMI upon R2D and FCHG don't
start until mmiInit(), and that call is driven by Switch_ON() code,
hence the wait for R2D and FCHG init can be made in that code path
instead of the MMI task. Furthermore, with our new way of signaling
PWON button boot to MMI, we need a new wait to ensure that the MMI
task is up - previously this assurance was provided by the wait for
Kp pointers to be set.
Solution: revert our previous PEI init hold-off additions to MMI,
add a new flag indicating MMI task init done, and put the combined
wait for all needed conditions into our new PWON button boot code
in power.c.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 27 Apr 2021 06:24:52 +0000 |
parents | 3a14ee9a9843 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS | Modul : alr_CSF +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the customer specific functions. +----------------------------------------------------------------------------- */ #ifndef ALR_CSF_C #define ALR_CSF_C #define ENTITY_PL /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include <ctype.h> #include "typedefs.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_alr.h" #include "mon_alr.h" #include "pei.h" #include "tok.h" #include "pcm.h" #ifdef GPRS #include "alr_gprs.h" #endif #ifdef _TMS470 #include "inth/iq.h" #include "armio/armio.h" #endif /* _TMS470 */ #include "alr.h" /*==== IMPORT =====================================================*/ /*==== EXPORT =====================================================*/ /*==== PRIVAT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (8403) MODULE : alr_CSF | | STATE : code ROUTINE : csf_show_version | +--------------------------------------------------------------------+ PURPOSE : Trace Layer 1 DSP version numbers */ GLOBAL const void csf_show_version (T_TST_TEST_HW_CON *ver) { #if defined (_TMS470) USHORT build, hw, jtag, rev; /* * Retrieve hardware info and build from library */ hw = 0; build = IQ_GetBuild(); jtag = IQ_GetJtagId(); rev = IQ_GetRevision(); TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev); if (ver) { /* * Retrieve Layer 1 info from primitive */ TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X", ver->dsp_code_version, ver->dsp_patch_version, ver->dsp_checksum); TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X", ver->mcu_alr_version, ver->mcu_gprs_version, ver->mcu_tm_version); PFREE (ver); } #else /* _TMS470 */ if (ver) { PFREE (ver); } #endif /* _TMS470 */ } #if !defined NTRACE /* * The following monitor capabilities are used by the Condat RT system. * They are only included in the trace version of protocol stack. /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_idle | +--------------------------------------------------------------------+ PURPOSE : traces the downlink counter values in idle mode if a change occur. */ UBYTE v_mon_counter_idle = 0; GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt) { if (v_mon_counter_idle) { /* * only if monitoring is enabled */ PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND); mon_counter_idle->act_dlt = act_dlt; mon_counter_idle->max_dlt = max_dlt; PSENDX(RR, mon_counter_idle); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_dedi | +--------------------------------------------------------------------+ PURPOSE : traces the radiolink counter values in dedicated mode if a change occur. */ UBYTE v_mon_counter_dedi = 0; GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt) { if (v_mon_counter_dedi) { /* * only if monitoring is enabled */ PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND); mon_counter_dedi->act_rlt = act_rlt; mon_counter_dedi->max_rlt = max_rlt; PSENDX(RR, mon_counter_dedi); } } #endif /* !NTRACE */ /* * Function added in FreeCalypso to support Openmoko's AT@BAND command * without making ACI include ALR header files. */ GLOBAL void alr_get_band_of_serving_cell (char *strbuf) { switch(alr_data->sc_band) { case BAND_GSM_900: strcpy(strbuf, "GSM 900"); break; case BAND_DCS_1800: strcpy(strbuf, "DCS 1800"); break; case BAND_PCS_1900: strcpy(strbuf, "PCS 1900"); break; case BAND_E_GSM: strcpy(strbuf, "EGSM"); break; case BAND_GSM_850: strcpy(strbuf, "GSM 850"); break; default: strcpy(strbuf, "Unknown"); } } #endif