view src/gpf/ccd/csn1_s0_opt.c @ 223:740a8e8fc9d7

startup sync logic rework for the new PWON button boot scheme Previously we added logic to the MMI task to hold off PEI init until R2D is running, and then extended that condition to wait for FCHG init too. However, the dependencies of MMI upon R2D and FCHG don't start until mmiInit(), and that call is driven by Switch_ON() code, hence the wait for R2D and FCHG init can be made in that code path instead of the MMI task. Furthermore, with our new way of signaling PWON button boot to MMI, we need a new wait to ensure that the MMI task is up - previously this assurance was provided by the wait for Kp pointers to be set. Solution: revert our previous PEI init hold-off additions to MMI, add a new flag indicating MMI task init done, and put the combined wait for all needed conditions into our new PWON button boot code in power.c.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 27 Apr 2021 06:24:52 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project : CCD
|  Modul   : csn1_s0_opt.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for CSN1_S0 elements
+----------------------------------------------------------------------------- 
*/

/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs);
extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs);

#ifndef RUN_FLASH
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)               MODULE  : CCD                       |
| STATE   : code                     ROUTINE : cdc_csn1_s0_opt_decode    |
+------------------------------------------------------------------------+

  PURPOSE : Decoding of the non-standard type CSN1 S0 element.
            The encoding rule for this type is very similar to the 
            CSN.1 type. Except for the presence flag which is 0 in 
            this case. 
            The encoded IE consists of one bit for presence flag and 
            a value part. Only if the flag bit is equal 0 the value 
            part will follow it.

            The element value can be present, then it is preceded by the 
            flag value 0. If the element is represented by the flag 1 only 
            the value is absent! Besides the absence of the whole element 
            is allowed.
*/

SHORT cdc_csn1_s0_opt_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s0_opt_decode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s0_opt_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_decode (0, e_ref, globs);
}
#endif /* !RUN_FLASH */

#ifndef RUN_FLASH
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                    |
| STATE   : code                    ROUTINE : cdc_csn1_s0_opt_encode     |
+------------------------------------------------------------------------+

  PURPOSE : Encoding of the non-standard type CSN1 S0 element.
            The encoding rule for this type is very similar to CSN.1
            type. Except for the presence flag which is 0 in this
            case. The encoded bit pattern consists of a 0 bit as 
            valid flag and a value part. If the element is present
            (the v_xxx component is TRUE in the decoded message)
            a 0 bit will be coded followed by the encoded value part.
            Otherwise a 1 bit will be encoded.
            Possible array types are given by melem[e_ref].repType:
            0) ' ' =>  {0| IE}        (no array)
            1) 'i' =>  {0 IE} ** 1    (many repeations up to a 1 bit)
            2) 'v' =>  {0|1 IE}* val  (val is another IE)
            3) 'c' =>  {0|1 IE}* 3    (3 is  an example)
*/

SHORT cdc_csn1_s0_opt_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s0_opt_encode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s0_opt_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_encode (0, e_ref, globs);
}
#endif /* !RUN_FLASH */