FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/sap/8010_142_smreg_sap.pdf @ 275:79cfefc1e2b4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_142_smreg_sap.pdf
;*** Creation       : Wed Mar 11 09:57:52 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_142_smreg_sap
;*** Document No.   : 8010.142.02.011
;*** Document Date  : 2003-08-22
;*** Document Status: APPROVED
;*** Document Author: MVJ
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:28:36 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-22"
PRAGMA 	ID_AND_VERSION 	"8010.142.02.011"
PRAGMA 	PREFIX 	SMREG 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines






VALTAB 	VAL_pdp_type
VAL 	1 	PDP_PPP 	"PDP type PPP"
VAL 	15 	PDP_EMPTY 	"Dynamic address assignment in effect"
VAL 	33 	PDP_IPV4 	"IP version 4"
VAL 	87 	PDP_IPV6 	"IP version 6"




VAR 	apn_buf 	"Access point name value" 	B


VAR 	pdp_type 	"PDP type" 	B

VAL 	@p_8010_142_smreg_sap - VAL_pdp_type@ 	




COMP 	apn 	 "access point name"
{
 	apn_buf 	[3..102] 	 ; Access point name value
}






; SMREG_CONFIGURE_REQ 	0x2600
; SMREG_PDP_ACTIVATE_REQ 	0x2601
; SMREG_PDP_ACTIVATE_CNF 	0x6600
; SMREG_PDP_ACTIVATE_IND 	0x6602
; SMREG_PDP_ACTIVATE_REJ 	0x6601
; SMREG_PDP_ACTIVATE_REJ_RES 	0x2604
; SMREG_PDP_ACTIVATE_SEC_REQ 	0x2606
; SMREG_PDP_ACTIVATE_SEC_CNF 	0x6608
; SMREG_PDP_ACTIVATE_SEC_REJ 	0x6609
; SMREG_PDP_DEACTIVATE_REQ 	0x2602
; SMREG_PDP_DEACTIVATE_CNF 	0x6603
; SMREG_PDP_DEACTIVATE_IND 	0x6604
; SMREG_PDP_MODIFY_REQ 	0x2605
; SMREG_PDP_MODIFY_CNF 	0x6606
; SMREG_PDP_MODIFY_IND 	0x6605
; SMREG_PDP_MODIFY_REJ 	0x6607



PRIM 	SMREG_CONFIGURE_REQ 	0x2600
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; RAT
 	EXTERN @p_8010_152_ps_include - sgsn_rel@ 	sgsn_rel 	 ; network release
}






PRIM 	SMREG_PDP_ACTIVATE_REQ 	0x2601
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; Transaction identifier
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; Minimum requested QoS
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	apn 	 ; Access point name
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; Traffic Flow Template; R99
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; PDP config options
}






PRIM 	SMREG_PDP_ACTIVATE_CNF 	0x6600
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Quality of service
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; PDP config options
}






PRIM 	SMREG_PDP_ACTIVATE_IND 	0x6602
{
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; transaction identifier
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	apn 	 ; access point name
}






PRIM 	SMREG_PDP_ACTIVATE_REJ 	0x6601
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Cause of rejection
}






PRIM 	SMREG_PDP_ACTIVATE_REJ_RES 	0x2604
{
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; transaction identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_REQ 	0x2606
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - pri_nsapi@ 	pri_nsapi 	 ; Primary NSAPI
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; Transaction identifier
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; Minimum requested QoS
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; Traffic flow template
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_CNF 	0x6608
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_REJ 	0x6609
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}






PRIM 	SMREG_PDP_DEACTIVATE_REQ 	0x2602
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
 	EXTERN @p_8010_152_ps_include - rel_ind@ 	rel_ind 	 ; Local deactivation flag
}






PRIM 	SMREG_PDP_DEACTIVATE_CNF 	0x6603
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
}






PRIM 	SMREG_PDP_DEACTIVATE_IND 	0x6604
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Deactivation cause
}






PRIM 	SMREG_PDP_MODIFY_REQ 	0x2605
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; minimum quality of service
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; traffic flow template
}






PRIM 	SMREG_PDP_MODIFY_CNF 	0x6606
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
}






PRIM 	SMREG_PDP_MODIFY_IND 	0x6605
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Quality of service; Optional
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address; R99, Optional
}






PRIM 	SMREG_PDP_MODIFY_REJ 	0x6607
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}