view configure.sh @ 275:79cfefc1e2b4

audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents ee04ca45053d
children e17bdedfbf2b
line wrap: on
line source

#!/bin/sh

set -e

if [ ! -f configure.sh ]
then
	echo "This script needs to be run from the top of the source tree" 1>&2
	exit 1
fi

if [ ! -f helpers/makeline ]
then
	echo "Please run make in the helpers directory first" 1>&2
	exit 1
fi

# start looking at our invokation line

if [ "$1" = --clean ]
then
	clean_flag=1
	shift
else
	clean_flag=0
fi

if [ $# -lt 2 ]
then
	echo "usage: $0 [--clean] target config [vars]" 1>&2
	exit 1
fi

TARGET="$1"
CONFIG="$2"

if [ ! -f "targets/$TARGET.conf" -o ! -f "targets/$TARGET.h" ]
then
	echo "Error: target $TARGET not known" 1>&2
	exit 1
fi

if [ ! -f "configs/$CONFIG" ]
then
	echo "Error: configuration $CONFIG not known" 1>&2
	exit 1
fi

# target defaults that can be overridden by $TARGET.conf

CHIPSET=10
DSP=36
RF=12
DISABLE_SLEEP=0
FCHG_STATE=0
RVTMUX_ON_MODEM=0

. "targets/$TARGET.conf"

# settings derived from the target-defined DSP version

case "$DSP" in
	33)
		AMR=0
		L1_DYN_DSP_DWNLD=0
		L1_VOICE_MEMO_AMR=0
		MELODY_E2=0
		SPEECH_RECO=0
		;;
	34)
		AMR=1
		L1_DYN_DSP_DWNLD=0
		L1_VOICE_MEMO_AMR=0
		MELODY_E2=0
		SPEECH_RECO=0
		;;
	36)
		AMR=1
		L1_DYN_DSP_DWNLD=1
		L1_VOICE_MEMO_AMR=1
		MELODY_E2=1
		SPEECH_RECO=1
		;;
	*)
		echo "Error: DSP=$DSP setting not understood" 1>&2
		exit 1
esac

# functional configuration part

# these vars MUST be set by the functional config
GPRS=
MMI=
R2D_STATE=
SRVC=

# dummy defaults for sans-UI configs
R2D_EMBEDDED_LCD=7
UI_CONFIG=bigcolor

# apply functional config

. "configs/$CONFIG"

# verify it

if [ -z "$GPRS" ]
then
	echo "Error: configs/$CONFIG must set GPRS=" 1>&2
	exit 1
fi

if [ -z "$MMI" ]
then
	echo "Error: configs/$CONFIG must set MMI=" 1>&2
	exit 1
fi

if [ -z "$R2D_STATE" ]
then
	echo "Error: configs/$CONFIG must set R2D_STATE=" 1>&2
	exit 1
fi

if [ -z "$SRVC" ]
then
	echo "Error: configs/$CONFIG must set SRVC=" 1>&2
	exit 1
fi

if [ "$MMI" != 0 ]
then
	FCHG_STATE=1
fi

# miscellaneous configurable feature settings

ALLOW_CSIM_GSM=1
MEMSUPER=0
OSL=0
OSX=0
SERIAL_DYNAMIC_SWITCH=0
TI_PROFILER=0
TRACEMASK_IN_FFS=0
TR_BAUD_CONFIG=TR_BAUD_115200
USE_CACHE=1
USE_STR2IND=0

SUFFIX=

# allow the user to override these defaults

shift
shift
while [ $# != 0 ]
do
	eval "$1"
	shift
done

BUILD_DIR="build-$TARGET-$CONFIG$SUFFIX"

echo "Building configuration $CONFIG for target $TARGET in $BUILD_DIR"

if [ "$clean_flag" = 1 ]
then
	rm -rf $BUILD_DIR
fi
mkdir -p $BUILD_DIR

: > $BUILD_DIR/lcfgen

# shell functions to be used in the configuration recipe

build_lib() {
	if [ $# != 1 ]
	then
		echo "Error: build_lib takes 1 argument" 1>&2
		exit 1
	fi
	scripts/mk-component.sh "$1"
	SUBDIR="$SUBDIR $1"
	current_lib=$1/$1.lib
	LIBS="$LIBS $current_lib"
}

blob_lib() {
	if [ $# != 1 ]
	then
		echo "Error: blob_lib takes 1 argument" 1>&2
		exit 1
	fi
	current_lib="../blobs/$1.lib"
	LIBS="$LIBS $current_lib"
}

cache_lib() {
	if [ $# != 1 ]
	then
		echo "Error: cache_lib takes 1 argument" 1>&2
		exit 1
	fi
	current_lib="../cache/$1.lib"
	LIBS="$LIBS $current_lib"
}

lib_link_magic() {
	if [ $# != 1 ]
	then
		echo "Error: lib_link_magic takes 1 argument" 1>&2
		exit 1
	fi
	if [ -z "$current_lib" ]
	then
	  echo "Error: lib_link_magic called before build_lib or blob_lib" 1>&2
	  exit 1
	fi
	SPECIAL_LINK_LIBS="$SPECIAL_LINK_LIBS $current_lib"
	echo "$1" >> $BUILD_DIR/lcfgen
}

# invoke the configuration recipe

export BUILD_DIR TARGET USE_STR2IND
export CHIPSET DSP RF
export AMR L1_DYN_DSP_DWNLD L1_VOICE_MEMO_AMR MELODY_E2 SPEECH_RECO
export DISABLE_SLEEP
export FCHG_STATE R2D_STATE
export GPRS MMI SRVC RVTMUX_ON_MODEM
export R2D_EMBEDDED_LCD UI_CONFIG
export ALLOW_CSIM_GSM SERIAL_DYNAMIC_SWITCH TR_BAUD_CONFIG
export TI_PROFILER TRACEMASK_IN_FFS
export MEMSUPER OSL

scripts/config-headers.sh

SUBDIR=
LIBS=
SPECIAL_LINK_LIBS=
current_lib=

if [ "$USE_CACHE" = 1 ]
then
	cache_lib ccddata
else
	build_lib ccddata
fi

# ACI libs
build_lib aci
build_lib aciext
build_lib aci_dti_mng
build_lib atiext
build_lib comlib

if [ "$GPRS" = 1 ]
then
	build_lib config_gprs_fl
	build_lib config_gprs_ir
else
	build_lib config_gsm_fl
	build_lib config_gsm_ir
fi
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

# UI layers
if [ "$MMI" = 2 ]
then
	build_lib bmi
	if [ "$UI_CONFIG" = bigcolor ]
	then
		build_lib icn
	fi
	build_lib mfw
	build_lib fcbm
fi

# G23M protocol stack libs
build_lib alr
build_lib cc
build_lib dl
build_lib dti
build_lib l1_pei
build_lib mm
build_lib rr
build_lib sim_b_lib
build_lib sms
build_lib ss
build_lib uart_b_lib

# fax and data
if [ "$SRVC" != 0 ]
then
	build_lib l2r
	build_lib ra
	build_lib rlp
fi

# fax specific
if [ "$SRVC" = 1 ]
then
	build_lib fad
	build_lib t30
fi

# GPRS specific
if [ "$GPRS" = 1 ]
then
	build_lib cci
	build_lib cci_ir
	lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
	build_lib cl
	build_lib gmm
	build_lib grlc
	build_lib grlc_ir
	lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
	build_lib grr
	build_lib llc
	build_lib sm
	build_lib sndcp
	build_lib ppp
	build_lib ppp_ir
	lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
	build_lib upm
fi

# Condat drivers
build_lib gdi

# GPF

if [ "$USE_CACHE" = 1 -a "$MEMSUPER" = 0 ]
then
	cache_lib ccd_na7_db
elif [ "$USE_CACHE" = 1 -a "$MEMSUPER" = 2 ]
then
	cache_lib ccd_na7_db_ps
else
	build_lib ccd
fi

if [ "$USE_CACHE" = 1 -a "$MEMSUPER" = 0 -a "$OSL" = 0 ]
then
	cache_lib frame_na7_db_fl
	cache_lib frame_na7_db_ir
elif [ "$USE_CACHE" = 1 -a "$MEMSUPER" = 2 -a "$OSL" = 0 ]
then
	cache_lib frame_na7_db_ps_fl
	cache_lib frame_na7_db_ps_ir
else
	build_lib frame_fl
	build_lib frame_ir
fi
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

if [ "$USE_CACHE" = 1 ]
then
	cache_lib misc_na7_db_fl
	cache_lib misc_na7_db_ir
else
	build_lib misc_fl
	build_lib misc_ir
fi
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

if [ "$OSX" = 1 -o "$MEMSUPER" != 0 ]
then
	build_lib osx
else
	blob_lib osx_na7_db
fi
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

build_lib tif_fl
build_lib tif_ir
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

# core drivers
build_lib drivers_flash

# Layer 1
build_lib tpudrv
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib l1_ext
lib_link_magic '(BSS_LIBS (.l1s_global))'
build_lib l1_int
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib l1_custom_ext
build_lib l1_custom_int
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

build_lib riviera_core_flash
build_lib riviera_cust_flash

# services
build_lib audio
build_lib audio_bgd
build_lib cst
build_lib dar
build_lib dar_gbl_var
lib_link_magic '(BSS_DAR_LIB (.bss))'
build_lib etm
build_lib lls

# app drivers
build_lib abb
build_lib buzzer
if [ "$FCHG_STATE" = 1 ]
then
	build_lib fchg
fi
build_lib ffs
build_lib ffs_drv
build_lib ffs_pcm
build_lib kpd
build_lib power
if [ "$R2D_STATE" = 1 ]
then
	build_lib r2d_drv_custom_flash
	build_lib r2d_drv_flash
	build_lib r2d_drv_int_ram
	lib_link_magic '(CONST_LIBS (.text, .r2dlcd))'
fi
build_lib rtc_drv
build_lib sim_drv
build_lib spi_drv
build_lib uart_drv

# system glue
build_lib main
build_lib bootloader
lib_link_magic '(CONST_BOOT_LIB (.const, .text, .text:v$3) BSS_BOOT_LIB (.bss))'

# Nucleus
if [ "$USE_CACHE" = 1 ]
then
	cache_lib nucleus_flash
	cache_lib nucleus_intram
else
	build_lib nucleus_flash
	build_lib nucleus_intram
fi
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

# TI's libc/libgcc equivalent
blob_lib rts16le_flash
blob_lib rts16le_int_ram
lib_link_magic '(BSS_LIBS (.bss))'

# generate the top level Makefile!

helpers/makeline def CONFIG_NAME "$CONFIG$SUFFIX" > $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
helpers/makeline def TARGET $TARGET >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
helpers/makeline def SUBDIR $SUBDIR >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
helpers/makeline def LIBS $LIBS >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
helpers/makeline def SPECIAL_LINK_LIBS $SPECIAL_LINK_LIBS >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
helpers/makeline def LINK_SCRIPT_SRC ../$LINK_SCRIPT_SRC >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile

if [ -n "$RAM_LINK_SCRIPT_SRC" ]
then
	helpers/makeline def RAM_LINK_SCRIPT_SRC ../$RAM_LINK_SCRIPT_SRC \
		>> $BUILD_DIR/Makefile
	echo >> $BUILD_DIR/Makefile
fi

helpers/makeline def FLASH_BASE_ADDR $FLASH_BASE_ADDR >> $BUILD_DIR/Makefile
helpers/makeline def FLASH_SECTOR_SIZE $FLASH_SECTOR_SIZE >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile

if [ "$USE_STR2IND" = 1 ]
then
	helpers/makeline def STR2IND_OBJ str2ind.obj >> $BUILD_DIR/Makefile
else
	echo 'STR2IND_OBJ=' >> $BUILD_DIR/Makefile
fi
echo >> $BUILD_DIR/Makefile

cat makefile-frags/first-part >> $BUILD_DIR/Makefile

if [ "$USE_STR2IND" = 1 ]
then
	cat makefile-frags/str2ind >> $BUILD_DIR/Makefile
fi

cat makefile-frags/link-steps >> $BUILD_DIR/Makefile

case "$TARGET" in
	c11x|c139|j100)
		cat makefile-frags/m0-to-bin-c139 >> $BUILD_DIR/Makefile
		;;
	c155)
		cat makefile-frags/m0-to-bin-c155 >> $BUILD_DIR/Makefile
		;;
	*)
		cat makefile-frags/m0-to-bin-std >> $BUILD_DIR/Makefile
		;;
esac

cat makefile-frags/flash-script-gen >> $BUILD_DIR/Makefile

if [ -n "$RAM_LINK_SCRIPT_SRC" ]
then
	cat makefile-frags/ram-link-steps >> $BUILD_DIR/Makefile
fi

cat makefile-frags/clean-always >> $BUILD_DIR/Makefile
echo >> $BUILD_DIR/Makefile
echo 'FRC:' >> $BUILD_DIR/Makefile

# All done!

echo "Run make in $BUILD_DIR to compile the firmware"