view helpers/srec4ram.c @ 275:79cfefc1e2b4

audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 1fb47f5b597a
children
line wrap: on
line source

/*
 * This ad hoc utility is used as part of building RAM-loadable
 * firmware images for targets with large RAM.  It reads the ramimage.m0
 * S-record file produced by TI's hex470 post-linker and re-emits it
 * in another SREC form that is suitable for feeding to fc-xram.
 */

#include <sys/types.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>

char *infname;
FILE *inf, *outf;
char srecbuf[80];
u_char srecbin[40], srecout[40];
int lineno;

decode_hex_byte(s)
	char *s;
{
	register int u, l;

	if (!isxdigit(s[0]) || !isxdigit(s[1]))
		return(-1);
	if (isdigit(s[0]))
		u = s[0] - '0';
	else if (isupper(s[0]))
		u = s[0] - 'A' + 10;
	else
		u = s[0] - 'a' + 10;
	if (isdigit(s[1]))
		l = s[1] - '0';
	else if (isupper(s[1]))
		l = s[1] - 'A' + 10;
	else
		l = s[1] - 'a' + 10;
	return((u << 4) | l);
}

srec2bin()
{
	register int i, l, b;

	l = decode_hex_byte(srecbuf + 2);
	if (l < 1) {
		fprintf(stderr, "%s line %d: S-record length octet is bad\n",
			infname, lineno);
		exit(1);
	}
	srecbin[0] = l;
	if (l > 35) {
		fprintf(stderr,
			"%s line %d: S-record is longer than expected\n",
			infname, lineno);
		exit(1);
	}
	for (i = 1; i <= l; i++) {
		b = decode_hex_byte(srecbuf + i*2 + 2);
		if (b < 0) {
			fprintf(stderr, "%s line %d: hex decode error\n",
				infname, lineno);
			exit(1);
		}
		srecbin[i] = b;
	}
	return(0);
}

srec_cksum()
{
	u_char accum;
	register int i, len;

	len = srecbin[0] + 1;
	accum = 0;
	for (i = 0; i < len; i++)
		accum += srecbin[i];
	if (accum != 0xFF) {
		fprintf(stderr, "%s line %d: bad checksum\n", infname, lineno);
		exit(1);
	}
	return(0);
}

emit_output_srec(type, buf)
	u_char *buf;
{
	int i;
	u_char accum = 0;

	putc('S', outf);
	putc(type, outf);
	for (i = 0; i < buf[0]; i++) {
		fprintf(outf, "%02X", buf[i]);
		accum += buf[i];
	}
	fprintf(outf, "%02X\n", ~accum & 0xFF);
	return 0;
}

transform_s3()
{
	int datalen;
	u_char *sp, *dp;
	int i;

	if (srecbin[0] < 6) {
		fprintf(stderr,
			"%s line %d: S3 record is too short\n",
			infname, lineno);
		exit(1);
	}
	datalen = srecbin[0] - 5;
	if (datalen & 1) {
		fprintf(stderr, "%s line %d: odd data length\n",
			infname, lineno);
		exit(1);
	}
	sp = srecbin;
	dp = srecout;
	for (i = 0; i < 5; i++)
		*dp++ = *sp++;
	for (i = 0; i < datalen; i += 2) {
		dp[0] = sp[1];
		dp[1] = sp[0];
		sp += 2;
		dp += 2;
	}
	return 0;
}

generate_vectors_record()
{
	u_char *dp;
	u_long addr;
	int i;

	srecout[0] = 28 + 5;
	srecout[1] = 0x00;
	srecout[2] = 0x80;
	srecout[3] = 0x00;
	srecout[4] = 0x00;
	dp = srecout + 5;
	for (i = 0; i < 7; i++) {
		addr = 0x01004000 + i * 4;
		*dp++ = addr;
		*dp++ = addr >> 8;
		*dp++ = addr >> 16;
		*dp++ = addr >> 24;
	}
	emit_output_srec('3', srecout);
	return 0;
}

generate_jump_record()
{
	srecout[0] = 5;
	srecout[1] = 0x01;
	srecout[2] = 0x00;
	srecout[3] = 0x40;
	srecout[4] = 0x58;
	emit_output_srec('7', srecout);
	return 0;
}

main(argc, argv)
	char **argv;
{
	if (argc < 2 || argc > 3) {
		fprintf(stderr, "usage: %s input.m0 [output.srec]\n", argv[0]);
		exit(1);
	}
	infname = argv[1];
	inf = fopen(infname, "r");
	if (!inf) {
		perror(infname);
		exit(1);
	}
	if (argc > 2) {
		outf = fopen(argv[2], "w");
		if (!outf) {
			perror(argv[2]);
			exit(1);
		}
	} else
		outf = stdout;
	for (lineno = 1; ; lineno++) {
		if (!fgets(srecbuf, sizeof srecbuf, inf)) {
			fprintf(stderr, "%s: premature EOF\n", infname);
			exit(1);
		}
		if (srecbuf[0] != 'S') {
			fprintf(stderr, "%s line %d: not an S-record\n",
				infname, lineno);
			exit(1);
		}
		srec2bin();
		srec_cksum();
		switch (srecbuf[1]) {
		case '0':
			emit_output_srec('0', srecbin);
			continue;
		case '3':
			transform_s3();
			emit_output_srec('3', srecout);
			continue;
		case '7':
			break;
		default:
			fprintf(stderr, "%s line %d: unexpected S%c record\n",
				infname, lineno, srecbuf[1]);
			exit(1);
		}
		break;
	}
	generate_vectors_record();
	generate_jump_record();
	exit(0);
}