FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/lcc/lcc_handle_timers.c @ 275:79cfefc1e2b4
audio mode load: gracefully handle mode files of wrong AEC version
Unfortunately our change of enabling L1_NEW_AEC (which is necessary
in order to bring our Calypso ARM fw into match with the underlying
DSP reality) brings along a change in the audio mode file binary
format and file size - all those new tunable AEC parameters do need
to be stored somewhere, after all. But we already have existing
mode files in the old format, and setting AEC config to garbage when
loading old audio modes (which is what would happen without the
present change) is not an appealing proposition.
The solution implemented in the present change is as follows: the
audio mode loading code checks the file size, and if it differs
from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure
is cleared - set to the default (disabled AEC) for the compiled type
of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure
sits at the end of T_AUDIO_MODE!
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 30 Jul 2021 02:55:48 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * Timers * * $Id: pwr_handle_timers.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __PWR_HANDLE_TIMERS_C_ #define __PWR_HANDLE_TIMERS_C_ UINT32 rvf_get_tick_count(void); void pwr_check_timers(void); T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin); T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin); void stop_ci_charge(void); void pwr_modulate_off(void); void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID dest_addr_id); int pwr_capacity(uint16 Vbat); void mmi_send_msg(struct mmi_info_ind_s *event); void end_charging_house_keeping(void); void cv_charging_house_keeping(void); // Timer functions UINT32 pwr_timer_elapsed(UINT32 time_begin, UINT32 current_timer) { // return elapsed time in [ms] return (current_timer - time_begin) * 60 / 13; } T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0)); // Start timer (will be checked each time an ADC measurement is received) *timer_begin = rvf_get_tick_count(); ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RVM_RETURN pwr_stop_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0xFF)); return (RV_OK); } void pwr_stop_timers(void) { // Only stop charging related timers - not supervision timers pwr_stop_timer(&pwr_ctrl->time_begin_T1); pwr_stop_timer(&pwr_ctrl->time_begin_T2); pwr_stop_timer(&pwr_ctrl->time_begin_T3); pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_stop_timer(&pwr_ctrl->time_begin_mod_cycle); } T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RV_RET process_pwr_handle_T1_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : break; case CCI : case CCV : case LCI : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T1_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0xFF)); pwr_free(request); } T_RV_RET process_pwr_handle_T2_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Another timer did expire prior to the T2 timer - ignore this expiration break; case CCV : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T2_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T3_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Stop & reset timers pwr_stop_timers(); break; case CCI : case CCV : case LCI : case LCV : break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T3_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T4_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_modulate_off(); // Wait for duty cycle timer to expire before restarting this timer break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T4_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mod_cycle_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : // Calculate k value // Start DC timer // Start T4 timer based on k value // Modulation ON cv_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mod_cycle_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mmi_info_expiration(T_PWR_REQ *request) { struct mmi_info_ind_s MMI_Event; ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Send MMI info events according to configured repetition interval if (pwr_ctrl->flag_mmi_registered == 1) { pwr_ctrl->mmi_ptr->header.msg_id = MMI_BAT_SUPERVISION_INFO_IND; pwr_ctrl->mmi_ptr->Vbat = pwr_cfg->data.Vbat_avg_mV; pwr_ctrl->mmi_ptr->Tbat = pwr_cfg->data.Tbat_avg; pwr_ctrl->mmi_ptr->Cbat = pwr_capacity(pwr_cfg->data.Vbat_avg_mV); mmi_send_msg(pwr_ctrl->mmi_ptr); } // Restart timer ttw(ttr(TTrTimerLow,"MMI info timer started(%d)" NL, 0)); pwr_start_timer(&pwr_ctrl->time_begin_mmi_rep); break; case INI : case CCI : case CCV : case LCI : case LCV : // DON'T send any events when charging or initializing break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mmi_info_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0xFF)); } void pwr_check_timers() { UINT32 timer; ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0)); // Check timers T1, T2, T3, T4, duty cycle & mmi timer - if expired send timer expired events timer = rvf_get_tick_count(); // T1 if (pwr_ctrl->time_begin_T1 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T1 = pwr_timer_elapsed(pwr_ctrl->time_begin_T1, timer); if (pwr_ctrl->time_elapsed_T1 > pwr_cfg->bat.T1) { // EXPIRED! ttw(ttr(TTrTimer, "T1 expired (%d):" NL, pwr_ctrl->time_elapsed_T1)); // 'Stop' timer pwr_ctrl->time_elapsed_T1 = 0; pwr_ctrl->time_begin_T1 = 0; // Send timer expired event pwr_send_msg(TIMER_T1_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T2 if (pwr_ctrl->time_begin_T2 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T2 = pwr_timer_elapsed(pwr_ctrl->time_begin_T2, timer); if (pwr_ctrl->time_elapsed_T2 > pwr_cfg->bat.T2) { // EXPIRED! ttw(ttr(TTrTimer, "T2 expired (%d):" NL, pwr_ctrl->time_elapsed_T2)); // 'Stop' timer pwr_ctrl->time_elapsed_T2 = 0; pwr_ctrl->time_begin_T2 = 0; // Send timer expired event pwr_send_msg(TIMER_T2_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T3 if (pwr_ctrl->time_begin_T3 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T3 = pwr_timer_elapsed(pwr_ctrl->time_begin_T3, timer); if (pwr_ctrl->time_elapsed_T3 > pwr_cfg->bat.T3) { // EXPIRED! ttw(ttr(TTrTimer, "T3 expired (%d):" NL, pwr_ctrl->time_elapsed_T3)); // 'Stop' timer pwr_ctrl->time_elapsed_T3 = 0; pwr_ctrl->time_begin_T3 = 0; // Send timer expired event pwr_send_msg(TIMER_T3_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T4 if (pwr_ctrl->time_begin_T4 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T4 = pwr_timer_elapsed(pwr_ctrl->time_begin_T4, timer); if (pwr_ctrl->time_elapsed_T4 > pwr_cfg->data.T4) { // EXPIRED! ttw(ttr(TTrTimer, "T4 expired (%d):" NL, pwr_ctrl->time_elapsed_T4)); // 'Stop' timer pwr_ctrl->time_elapsed_T4 = 0; pwr_ctrl->time_begin_T4 = 0; // Send timer expired event pwr_send_msg(TIMER_T4_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // Duty cycle timer (Lithium only) if (pwr_ctrl->time_begin_mod_cycle != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_mod_cycle = pwr_timer_elapsed(pwr_ctrl->time_begin_mod_cycle, timer); if (pwr_ctrl->time_elapsed_mod_cycle > pwr_cfg->common.mod_cycle) { // EXPIRED! ttw(ttr(TTrTimer, "DC expired (%d):" NL, pwr_ctrl->time_elapsed_mod_cycle)); // 'Stop' timer pwr_ctrl->time_elapsed_mod_cycle = 0; pwr_ctrl->time_begin_mod_cycle = 0; // Send timer expired event pwr_send_msg(TIMER_MOD_CYCLE_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // MMI repetition timer if (pwr_ctrl->time_begin_mmi_rep != 0) { // Started - but has it expired? pwr_ctrl->time_elapsed_mmi_rep = pwr_timer_elapsed(pwr_ctrl->time_begin_mmi_rep, timer); if (pwr_ctrl->time_elapsed_mmi_rep > pwr_cfg->mmi.repetition) { // EXPIRED! // 'Stop' timer pwr_ctrl->time_elapsed_mmi_rep = 0; pwr_ctrl->time_begin_mmi_rep = 0; ttw(ttr(TTrTimer, "MMI info timer expired (%d):" NL, pwr_ctrl->time_elapsed_mmi_rep)); // Send timer expired event pwr_send_msg(TIMER_MMI_INFO_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0xFF)); } #endif