view src/cs/layer1/p_include/l1p_sign.h @ 275:79cfefc1e2b4

audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1P_SIGN.H
 *
 *        Filename l1p_sign.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#define P_GPRS  ( P_L1C + 2 )

// Messages Packet Transfer <-> L1A
#define MPHP_SINGLE_BLOCK_REQ             ( ( P_GPRS << 8 ) | 1  )
#define MPHP_SINGLE_BLOCK_CON             ( ( P_GPRS << 8 ) | 2  )
#define MPHP_STOP_SINGLE_BLOCK_REQ        ( ( P_GPRS << 8 ) | 3  )
#define MPHP_STOP_SINGLE_BLOCK_CON        ( ( P_GPRS << 8 ) | 4  )
#define L1P_SINGLE_BLOCK_CON              ( ( P_GPRS << 8 ) | 5  )

#define MPHP_ASSIGNMENT_REQ               ( ( P_GPRS << 8 ) | 6  )
#define MPHP_ASSIGNMENT_CON               ( ( P_GPRS << 8 ) | 7  )

#define MPHP_TBF_RELEASE_REQ              ( ( P_GPRS << 8 ) | 8  )
#define MPHP_TBF_RELEASE_CON              ( ( P_GPRS << 8 ) | 9  )

#define MPHP_REPEAT_UL_FIXED_ALLOC_REQ    ( ( P_GPRS << 8 ) | 10 )
#define MPHP_REPEAT_UL_FIXED_ALLOC_CON    ( ( P_GPRS << 8 ) | 11 )

#define MPHP_PDCH_RELEASE_REQ             ( ( P_GPRS << 8 ) | 12 )
#define MPHP_PDCH_RELEASE_CON             ( ( P_GPRS << 8 ) | 13 )

#define MPHP_TIMING_ADVANCE_REQ           ( ( P_GPRS << 8 ) | 14 )
#define MPHP_TIMING_ADVANCE_CON           ( ( P_GPRS << 8 ) | 15 )

#define MPHP_UPDATE_PSI_PARAM_REQ         ( ( P_GPRS << 8 ) | 16 )
#define MPHP_UPDATE_PSI_PARAM_CON         ( ( P_GPRS << 8 ) | 17 )


#define MPHP_RA_REQ                       ( ( P_GPRS << 8 ) | 18 )
#define MPHP_RA_CON                       ( ( P_GPRS << 8 ) | 19 )
#define MPHP_RA_STOP_REQ                  ( ( P_GPRS << 8 ) | 20 )
#define MPHP_RA_STOP_CON                  ( ( P_GPRS << 8 ) | 21 )

#define MPHP_POLLING_RESPONSE_REQ         ( ( P_GPRS << 8 ) | 22 )
#define MPHP_POLLING_IND                  ( ( P_GPRS << 8 ) | 23 )

#define L1P_RA_DONE                       ( ( P_GPRS << 8 ) | 24 )

// Messages Packet Idle <-> L1A
#define MPHP_START_PCCCH_REQ              ( ( P_GPRS << 8 ) | 25 )
#define MPHP_STOP_PCCCH_REQ               ( ( P_GPRS << 8 ) | 26 )
#define MPHP_STOP_PCCCH_CON               ( ( P_GPRS << 8 ) | 27 )
#define MPHP_SCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 28 )
#define MPHP_SCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 29 )
#define MPHP_SCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 30 )
#define MPHP_CR_MEAS_REQ                  ( ( P_GPRS << 8 ) | 31 )
#define MPHP_CR_MEAS_STOP_REQ             ( ( P_GPRS << 8 ) | 32 )
#define MPHP_CR_MEAS_STOP_CON             ( ( P_GPRS << 8 ) | 33 )
#define MPHP_INT_MEAS_REQ                 ( ( P_GPRS << 8 ) | 34 )
#define MPHP_INT_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 35 )
#define MPHP_INT_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 36 )
#define MPHP_NCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 37 )
#define MPHP_NCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 38 )
#define MPHP_NCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 39 )

#define MPHP_DATA_IND                     ( ( P_GPRS << 8 ) | 40 )
#define MPHP_CR_MEAS_IND                  ( ( P_GPRS << 8 ) | 41 )
#define MPHP_INT_MEAS_IND                 ( ( P_GPRS << 8 ) | 42 )
#define MPHP_TINT_MEAS_IND                ( ( P_GPRS << 8 ) | 43 )
#define MPHP_NCELL_PBCCH_IND              ( ( P_GPRS << 8 ) | 44 )
#define MPHP_TCR_MEAS_REQ                 ( ( P_GPRS << 8 ) | 45 )
#define MPHP_TCR_MEAS_IND                 ( ( P_GPRS << 8 ) | 46 )
#define MPHP_TCR_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 47 )
#define MPHP_TCR_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 48 )

/*** L1S -> L1A communication ***/
#define L1P_PALLC_INFO                    ( ( P_GPRS << 8)  | 49)
#define L1P_PNP_INFO                      ( ( P_GPRS << 8)  | 50)
#define L1P_PEP_INFO                      ( ( P_GPRS << 8)  | 51)
#define L1P_PBCCHS_INFO                   ( ( P_GPRS << 8)  | 52)
#define L1P_PACCH_INFO                    ( ( P_GPRS << 8)  | 53)
#define L1P_CR_MEAS_DONE                  ( ( P_GPRS << 8)  | 54)
#define L1P_TRANSFER_DONE                 ( ( P_GPRS << 8)  | 55)
#define L1P_TCR_MEAS_DONE                 ( ( P_GPRS << 8)  | 56)
#define L1P_TBF_RELEASED                  ( ( P_GPRS << 8)  | 57)
#define L1P_ITMEAS_IND                    ( ( P_GPRS << 8)  | 58)
#define L1P_POLL_DONE                     ( ( P_GPRS << 8)  | 59)
#define L1P_PDCH_RELEASED                 ( ( P_GPRS << 8)  | 60)
#define L1P_TA_CONFIG_DONE                ( ( P_GPRS << 8)  | 61)
#define L1P_PBCCHN_INFO                   ( ( P_GPRS << 8)  | 62)
#define L1P_REPEAT_ALLOC_DONE             ( ( P_GPRS << 8)  | 63)
#define L1P_ALLOC_EXHAUST_DONE            ( ( P_GPRS << 8)  | 64)