FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tm_cust0/l1tm_cust.h @ 275:79cfefc1e2b4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_CUST.H
 *
 *        Filename l1tm_cust.h
 *  Copyright 2003 (C) Texas Instruments  
 * 
 ************* Revision Controle System Header *************/


/*---------------------------------------------------------*/
/* Initial settings for test mode config => Cust_tm_init() */
/*---------------------------------------------------------*/

// Control algorithm settings: 0=>OFF, 1=>ON
#define AGC_ENABLE   1
#define AFC_ENABLE   1

// ADC conversion setting: 0=>OFF, 1=>ON
#define ADC_ENABLE   1

// AGC settings
#define TM_AGC_VALUE   50   // AGC gain
#define TM_LNA_OFF      0   // 0=>LNA ON, 1=>LNA OFF

// Power measurement settings
#define TM_NUM_MEAS     1  // number of measurements per TDMA
#define TM_WIN_MEAS     1  // position of measurement within TDMA

// BEACON and TCH settings
#define TM_BCCH_ARFCN   80     // beacon 
#define TM_TCH_ARFCN    62     // TCH arfcn
#define TM_MON_ARFCN    33     // monitor arfcn
#define TM_CHAN_TYPE    TCH_F  // channel type
#define TM_SUB_CHAN      0     // subchannel number
#define TM_SLOT_NUM      4     // TS number
#define TM_TSC           5     // Training Sequence
#define TM_TXPWR        15     // TXPWR setting
#define TM_TXPWR_SKIP    4
#define TM_TA            0     // timing advance setting
#define TM_BURST_TYPE    0     // 0=>normal burst, 1=>RACH burst
#define TM_BURST_DATA    0     // as defined in TM100.doc: tx_param_write
#define TM_PM_ENABLE     1     // Enable power measurements in packet transfer mode

// Statistics settings
#define TM_NUM_LOOPS              0  // number of times a task is executed, 0 means infinite loop
#define TM_AUTO_RESULT_LOOPS      0  // number of loops before stats result is returned, 0 means infinite
#define TM_AUTO_RESET_LOOPS       0  // number of loops before stats I/F is reset, 0 means infinite
#define TM_STAT_TYPE              1  // type of stats as defined in TM100.doc: stats_read
#define TM_STAT_BITMASK      0x6057  // stats bitmaks as defined in TM100.doc: stats_read

#if L1_GPRS
  // Settings for GPRS test mode:
  #define TM_PDTCH_ARFCN        62  // PDTCH arfcn
  #define TM_MULTISLOT_CLASS     1  // GPRS multi slot class
  #define TM_STAT_GPRS_SLOTS  0x80  // Bit mask for RX stats from PDTCH
  #define TM_RX_ALLOCATION    0x80  // RX slot allocation (bit7->TS0...bit0->TS7)
  #define TM_RX_CODING_SCHEME    1  // RX coding scheme
  #define TM_TX_ALLOCATION    0x80  // TX slot allocation (bit7->TS0...bit0->TS7)
  #define TM_TX_CODING_SCHEME    2  // TX coding scheme
  #define TM_TXPWR_GPRS         15  // GPRS txpwr level
#endif