view src/gpf/ccd/gsm5_tlv.c @ 275:79cfefc1e2b4

audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : gsm5_tlv.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for GSM5_TLV elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm5tlv_decode  |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type 5TLV element. This element
            consists of a 8 bit T component a
            8 or 16 Bit L component and a V component wich
            length depends on the value of the L component.
            If the length is in the range 0x00-0x7f the L component
            consist of one byte. For bigger length 0x80-0xff the
            L component consists of two bytes. The first byte is
            tied to 0x81 and the second byte contains a value in the
            range 0x80 to 0xff.


*/

SHORT cdc_gsm5tlv_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  T_TLV_SORT tlv_inf;
  
  tlv_inf.gotTag = TRUE;
  tlv_inf.gotLen = TRUE;
  
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm5tlv_decode()");
  #else
  TRACE_CCD (globs, "cdc_gsm5tlv_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif

  return cdc_tlv_decode (c_ref, e_ref, &tlv_inf, globs);
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm5tlv_encode  |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type 5TLV element. This element
            consists of a 8 bit T component a
            8 or 16 Bit L component and a V component wich
            length depends on the value of the L component.
            If the length is in the range 0x00-0x7f the L component
            consist of one byte. For bigger length 0x80-0xff the
            L component consists of two bytes. The first byte is
            tied to 0x81 and the second byte contains a value in the
            range 0x80 to 0xff.

*/

SHORT cdc_gsm5tlv_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm5tlv_encode()");
  #else
  TRACE_CCD (globs, "cdc_gsm5tlv_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif
  
  cdc_tlv_encode (e_ref, 8, 8, globs);

  return 1;
}
#endif /* !RUN_INT_RAM */