FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/p_aci.val @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_aci.val | | SOURCE : "sap\aci.pdf" | | LastModified : "2004-06-01" | | IdAndVersion : "8411.105.00.205" | | SrcFileTime : "Thu Nov 29 09:29:50 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_ACI_VAL #define P_ACI_VAL #define CDG_ENTER__P_ACI_VAL #define CDG_ENTER__FILENAME _P_ACI_VAL #define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01 #define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205 #define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_29_50_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_ACI_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cmd_src */ #define CMD_SRC_INT (0x0) /* Command from internal application */ #define CMD_SRC_EXT (0x1) /* Command from external application */ #define CMD_SRC_UNKNOWN (0xff) /* Reserved */ /* * Value constants for VAL_urt_stat */ #define URT_RDY_TO_SEND (0x0) /* URT is ready to accept new data */ #define URT_DATA_AVAIL (0x1) /* URT has data available */ #define URT_STAT_UNKNOWN (0xff) /* Reserved */ /* * Value constants for VAL_cause */ #define ABT_ABORT_DATA (0x0) /* Abort data mode */ #define ABT_ABORT_CMD (0x1) /* Abort current command */ /* * Value constants for VAL_ackflg */ #define ACI_NAK (0x0) /* Not Acknowledge */ #define ACI_ACK (0x1) /* Acknowledge */ /* * user defined constants */ #define MAX_CMD_LEN (0x17c) #define MAX_TRC_LEN (0x50) #define MAX_DATA_LEN (0xc8) #include "CDG_LEAVE.h" #endif