view cdg-hybrid/cdginc/p_gsim.val @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsim.val                                                     |
| SOURCE  : "sap\gsim.pdf"                                                 |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "8441.113.99.004"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:12 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSIM_VAL
#define P_GSIM_VAL


#define CDG_ENTER__P_GSIM_VAL

#define CDG_ENTER__FILENAME _P_GSIM_VAL
#define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004

#define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSIM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gu
 */
#define GSIM_GU_NA                     (0x0)      /* GPRS update status not applicable (i.e. this parameter shall be ignored) */
#define GSIM_GU1_UPDATED               (0x1)      /* last GPRS attach or RAU attempt successful */
#define GSIM_GU2_NOT_UPDATED           (0x2)      /* last GPRS attach or RAU attempt failed procedurally */
#define GSIM_GU3_ROAMING_NOT_ALLOWED   (0x3)      /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */

/*
 * Value constants for VAL_tmsi
 */
#define GSIM_TMSI_INVALID              (0xffffffff)/* P-TMSI invalid (see GSM 3.03)  */

/*
 * Value constants for VAL_ptmsi_signature_flag
 */
#define GSIM_PTMSI_SIG_DEL             (0x0)      /* P-TMSI Dignature shall be deleted */
#define GSIM_PTMSI_SIG_VALID           (0x1)      /* P-TMSI Signature is valid      */
#define GSIM_PTMSI_SIG_NA              (0x2)      /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_gsim_cksn
 */
#define GSIM_CKSN_NA                   (0x0)      /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_sim_gprs_invalid
 */
#define GSIM_SIM_GPRS_NA               (0x0)      /* not applicable (i.e. this parameter shall be ignored) */
#define GSIM_SIM_GPRS_VALID            (0x1)      /* SIM is considered as valid for GPRS */
#define GSIM_SIM_GPRS_INVALID          (0x2)      /* SIM is considered as invalid for GPRS */

/*
 * user defined constants
 */
#define GSIM_PTMSI_NA                  (0xffffffff)
#define SIZE_SRES                      (0x4)      
#define SIZE_KC                        (0x8)      
#define SIZE_RAND                      (0x10)     
#define MAX_IMSI                       (0x9)      

#include "CDG_LEAVE.h"


#endif