view cdg-hybrid/cdginc/p_gsmcom.val @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsmcom.val                                                   |
| SOURCE  : "sap\gsmcom.pdf"                                               |
| LastModified : "2002-10-04"                                              |
| IdAndVersion : "8443.100.02.008"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:26 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSMCOM_VAL
#define P_GSMCOM_VAL


#define CDG_ENTER__P_GSMCOM_VAL

#define CDG_ENTER__FILENAME _P_GSMCOM_VAL
#define CDG_ENTER__P_GSMCOM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSMCOM_VAL__LAST_MODIFIED _2002_10_04
#define CDG_ENTER__P_GSMCOM_VAL__ID_AND_VERSION _8443_100_02_008

#define CDG_ENTER__P_GSMCOM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_26_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSMCOM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gsmcom_dummy
 */

/*
 * user defined constants
 */
#define SIM_ORIGINATING_ENTITY         (0x0)      
#define ACI_ORIGINATING_ENTITY         (0x1)      
#define RLP_ORIGINATING_ENTITY         (0x2)      
#define RR_ORIGINATING_ENTITY          (0x3)      
#define MM_ORIGINATING_ENTITY          (0x4)      
#define CC_ORIGINATING_ENTITY          (0x5)      
#define SS_ORIGINATING_ENTITY          (0x6)      
#define SMSCP_ORIGINATING_ENTITY       (0x7)      
#define SMSRP_ORIGINATING_ENTITY       (0x8)      
#define SMSTP_ORIGINATING_ENTITY       (0x9)      
#define GMM_ORIGINATING_ENTITY         (0xa)      
#define SM_ORIGINATING_ENTITY          (0xb)      
#define FAD_ORIGINATING_ENTITY         (0xc)      
#define T30_ORIGINATING_ENTITY         (0xd)      
#define GRR_ORIGINATING_ENTITY         (0xe)      
#define PPP_ORIGINATING_ENTITY         (0xf)      
#define LLC_ORIGINATING_ENTITY         (0x10)     
#define SNDCP_ORIGINATING_ENTITY       (0x11)     
#define PKTIO_ORIGINATING_ENTITY       (0x12)     
#define PSI_ORIGINATING_ENTITY         (0x13)     

#include "CDG_LEAVE.h"


#endif