FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/p_ra.val @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_ra.val | | SOURCE : "sap\ra.pdf" | | LastModified : "2002-04-26" | | IdAndVersion : "8411.102.98.204" | | SrcFileTime : "Thu Nov 29 09:51:34 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RA_VAL #define P_RA_VAL #define CDG_ENTER__P_RA_VAL #define CDG_ENTER__FILENAME _P_RA_VAL #define CDG_ENTER__P_RA_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_RA_VAL__LAST_MODIFIED _2002_04_26 #define CDG_ENTER__P_RA_VAL__ID_AND_VERSION _8411_102_98_204 #define CDG_ENTER__P_RA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_51_34_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RA_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_model */ #define RA_MODEL_SPEECH (0x0) /* model speech */ #define RA_MODEL_TRANS (0x1) /* model 1b async transparent */ #define RA_MODEL_RLP (0x2) /* model 3b async nontransparent */ #define RA_MODEL_FAX (0x3) /* model 5b fax 3.45 */ /* * Value constants for VAL_tra_rate */ #define TRA_FULLRATE_2400 (0x0) /* fullrate 2,4/3,6 kBit */ #define TRA_HALFRATE_2400 (0x1) /* halfrate 2,4/3,6 kBit */ #define TRA_FULLRATE_4800 (0x2) /* fullrate 4,8/6 kBit */ #define TRA_HALFRATE_4800 (0x3) /* halfrate 4,8/6 kBit */ #define TRA_FULLRATE_9600 (0x4) /* fullrate 9,6/12 kBit */ #define TRA_FULLRATE_14400 (0x5) /* fullrate 13,4/14,4 kBit */ /* * Value constants for VAL_user_rate */ #define URA_300 (0x0) /* user rate 300bps */ #define URA_1200 (0x1) /* user rate 1200bps */ #define URA_2400 (0x2) /* user rate 2400bps */ #define URA_4800 (0x3) /* user rate 4800bps */ #define URA_9600 (0x4) /* user rate 9600bps */ #define URA_1200_75 (0x5) /* user rate 1200/75bps */ #define URA_14400 (0x6) /* user rate 14400bps */ /* * Value constants for VAL_dtx_flg */ #define DTX_DIS (0x0) /* Disable DTX */ #define DTX_EN (0x1) /* Enable DTX */ /* * Value constants for VAL_fr_type */ #define FR_T4DATA (0x0) /* GSM 3.45 Data frame */ #define FR_STATUS (0x1) /* GSM 3.45 Status (BCS) frame */ #define FR_SYNC (0x2) /* GSM 3.45 Sync frame */ #define FR_TRAIN (0x3) /* GSM 3.45 Status (TRAIN) frame */ #define FR_TRANS (0x4) /* Transparent Data frame */ #define FR_RLP (0x5) /* Valid RLP frame */ #define FR_INVALID (0xf) /* Invalid frame or FCS error detected in RLP mode */ /* * Value constants for VAL_status */ #define ST_SA (0x1) /* Status SA */ #define ST_SB (0x2) /* Status SB */ #define ST_X (0x4) /* Status X */ #define ST_OVER (0x8) /* Overspeed flag */ /* * Value constants for VAL_ack_flg */ #define RA_ACK (0x0) /* acknowledged */ #define RA_NAK (0x1) /* not acknowledged */ /* * Value constants for VAL_detect */ #define DET_NO_STATUS (0x0) /* do not detect status frames */ #define DET_STATUS (0x1) /* detect status frames */ /* * Value constants for VAL_tick_dir */ #define TICK_UL (0x1) /* tick uplink */ #define TICK_DL (0x2) /* tick downlink */ #define TICK_UL_DL (0x3) /* tick uplink & downlink */ /* * Value constants for VAL_offset */ #define ra_conf (0x0) /* Configurations */ #define ra_act (0x1) /* Activities */ #define ra_test (0x2) /* Test */ #define ra_statu (0x3) /* Uplink status */ #define ra_statd (0x4) /* Downlink status */ #define fax_status_det (0x5) /* Fax status detection */ #define rau (0x6) /* Buffer for uplink characters */ #define rad (0x7) /* Buffer for downlink characters */ #define ntu (0x8) /* Buffer for uplink RLP frames */ #define ntd (0x9) /* Buffer for downlink RLP frames */ #define faxu (0xa) /* Buffer for uplink fax data */ #define faxd (0xb) /* Buffer for downlink fax data */ /* * user defined constants */ #define DUMMY_RA (0x0) #include "CDG_LEAVE.h" #endif