view cdg-hybrid/cdginc/p_tra.val @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_tra.val                                                      |
| SOURCE  : "sap\tra.pdf"                                                  |
| LastModified : "2002-06-10"                                              |
| IdAndVersion : "8411.106.98.101"                                         |
| SrcFileTime  : "Thu Nov 29 09:55:46 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_TRA_VAL
#define P_TRA_VAL


#define CDG_ENTER__P_TRA_VAL

#define CDG_ENTER__FILENAME _P_TRA_VAL
#define CDG_ENTER__P_TRA_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_TRA_VAL__LAST_MODIFIED _2002_06_10
#define CDG_ENTER__P_TRA_VAL__ID_AND_VERSION _8411_106_98_101

#define CDG_ENTER__P_TRA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_55_46_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_TRA_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_entity_name
 */
#define TRA_ENTITY_NAME_LEN            (0x6)      /* Max name length                */

/*
 * Value constants for VAL_ack_flg
 */
#define TRA_ACK                        (0x0)      /* acknowledged                   */
#define TRA_NAK                        (0x1)      /* not acknowledged               */

/*
 * Value constants for VAL_dti_direction
 */
#define TRA_DTI_NORMAL                 (0x0)      /* DTI used normally              */
#define TRA_DTI_INVERTED               (0x1)      /* DTI is inverted                */

/*
 * Value constants for VAL_dti_conn
 */
#define TRA_CONNECT_DTI                (0x0)      /* Connect DTI to TRA             */
#define TRA_DISCONNECT_DTI             (0x1)      /* Connect DTI to upper layer     */

#include "CDG_LEAVE.h"


#endif