FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/sap/8010_157_upm_sap.pdf @ 72:7bf39f5e834d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_157_upm_sap.pdf
;*** Creation       : Wed Mar 11 09:57:56 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_157_upm_sap
;*** Document No.   : 8010.157.04.003
;*** Document Date  : 2004-01-19
;*** Document Status: APPROVED
;*** Document Author: MVJ
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:29:28 2007"
PRAGMA 	LAST_MODIFIED 	"2004-01-19"
PRAGMA 	ID_AND_VERSION 	"8010.157.04.003"
PRAGMA 	PREFIX 	UPM 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines















; UPM_DTI_REQ 	0x8000009D
; UPM_DTI_CNF 	0x8000409D
; UPM_COUNT_REQ 	0x8001009D
; UPM_COUNT_CNF 	0x8001409D



PRIM 	UPM_DTI_REQ 	0x8000009D
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - dti_conn@ 	dti_conn 	 ; DTI connect
 	EXTERN @p_8010_137_nas_include - dti_direction@ 	dti_direction 	 ; DTI direction
 	EXTERN @p_8010_137_nas_include - dti_linkid@ 	dti_linkid 	 ; DTI link ID
 	EXTERN @p_8010_137_nas_include - dti_neighbor@ 	dti_neighbor 	 ; DTI neighbor
}






PRIM 	UPM_DTI_CNF 	0x8000409D
{
 	EXTERN @p_8010_137_nas_include - dti_linkid@ 	dti_linkid 	 ; DTI Link ID
 	EXTERN @p_8010_137_nas_include - dti_conn@ 	dti_conn 	 ; DTI connect
}






PRIM 	UPM_COUNT_REQ 	0x8001009D
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - reset@ 	reset 	 ; shall counters be reset
}






PRIM 	UPM_COUNT_CNF 	0x8001409D
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - octets_uplink@ 	octets_uplink 	 ; octets uplink
 	EXTERN @p_8010_137_nas_include - octets_downlink@ 	octets_downlink 	 ; octets  downlink
 	EXTERN @p_8010_137_nas_include - packets_uplink@ 	packets_uplink 	 ; packets uplink
 	EXTERN @p_8010_137_nas_include - packets_downlink@ 	packets_downlink 	 ; packets downlink
}