FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/ph.pdf @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : ph.pdf ;*** Creation : Wed Mar 11 09:58:34 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : ph ;*** Document No. : 6147.112.01.100 ;*** Document Date : 2001-10-26 ;*** Document Status: APPROVED ;*** Document Author: SBK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:50:28 2007" PRAGMA LAST_MODIFIED "2001-10-26" PRAGMA ID_AND_VERSION "6147.112.01.100" CONST DUMMY_PH 0 ; Dummy, not used, needed to satisfy tool chain which requires at least one constant definition in a SAP VALTAB VAL_ch_type VAL 0 CH_TYPE_SACCH "SACCH" VAL 1 CH_TYPE_SDCCH "SDCCH" VAL 2 CH_TYPE_FACCH "FACCH Full Rate" VAL 3 "reserved" VAL 4 "reserved" VAL 5 "reserved" VAL 6 "reserved" VAL 7 CH_TYPE_FACCH_HR "FACCH Half Rate" VAR l2_channel "Layer 2 channel-type" B VAL @p_mphc - VAL_l2_channel@ VAR l_buf "length of content in bit" S VAR o_buf "offset of content in bit" S VAR buf "buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1;" B VAR dummy "dummy not used" B COMP sdu "message unit" { l_buf ; length of content in bit o_buf ; offset of content in bit buf [1] ; buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1; } ; PH_READY_TO_SEND 0x4100 ; PH_DATA_REQ 0x0100 ; PH_TRACE_IND 0x4102 PRIM PH_READY_TO_SEND 0x4100 { l2_channel AS ch_type ; channel type } PRIM PH_DATA_REQ 0x0100 { l2_channel AS ch_type ; channel type dummy ; dummy not used; reserved sdu ; message unit } PRIM PH_TRACE_IND 0x4102 { dummy ; dummy not used; not used }