FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/rrrrlp.pdf @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rrrrlp.pdf ;*** Creation : Wed Mar 11 09:58:48 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : rrrrlp ;*** Document No. : 0000.000.00.002 ;*** Document Date : 2002-09-10 ;*** Document Status: BEING_PROCESSED ;*** Document Author: VK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:53:22 2007" PRAGMA LAST_MODIFIED "2002-09-10" PRAGMA ID_AND_VERSION "0000.000.00.002" CONST MAX_SDU_LEN 1 ; CONST MAX_NCELL_L1 12 ; Max no. of NC layer 1 is able to measure CONST MAX_NCELL_EOTD 15 ; Max no. of NC reported in the Measurement Assistance Data Element (3GPP 04.31) CONST MAX_NCELL_EOTD_SI 32 ; Max no. of NC reported in the Measurement Assistance Data SI List Element (3GPP 04.31) VAR dummy "Dummy" B VAR l_buf "length in bits" S VAR o_buf "offset in bits" S VAR buf "bit buffer" B VAR cr "Command or Response" B COMP sdu "Service Data Unit" { l_buf ; length in bits o_buf ; offset in bits buf [MAX_SDU_LEN] ; bit buffer } ; RRRRLP_DATA_IND 0x80004041 ; RRRRLP_DATA_REQ 0x80000041 ; RRRRLP_DATA_CNF 0x80014041 ; RRRRLP_ERROR_IND 0x80024041 PRIM RRRRLP_DATA_IND 0x80004041 { cr ; Command / Response sdu ; APDU_IND } PRIM RRRRLP_DATA_REQ 0x80000041 { cr ; Command / Response sdu ; APDU_REQ } PRIM RRRRLP_DATA_CNF 0x80014041 { dummy ; Dummy } PRIM RRRRLP_ERROR_IND 0x80024041 { dummy ; Dummy }