FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/udp.pdf @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : udp.pdf ;*** Creation : Wed Mar 11 09:58:55 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : udp ;*** Document No. : 8444.100.00.006 ;*** Document Date : 2003-08-26 ;*** Document Status: BEING_PROCESSED ;*** Document Author: JK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:56:22 2007" PRAGMA LAST_MODIFIED "2003-08-26" PRAGMA ID_AND_VERSION "8444.100.00.006" VALTAB VAL_port VAL 0 UDP_AUTOASSIGN_PORT "UDP must assign a free port number" VALTAB VAL_err VAL 0 UDP_BIND_NOERROR "no error" VAL 1 UDP_BIND_PORTINUSE "port already in use" VAL 2 UDP_BIND_UDPDOWN "udp is deactivated" VAR port "destination port" S VAL @p_udp - VAL_port@ VAR err "error code" B VAL @p_udp - VAL_err@ VAR dst_port "destination port" S VAR src_port "source port" S VAR err_msg "error message" B VAR src_addr "source address" L VAR dst_addr "destination address" L ; UDP_BIND_REQ 0x80000046 ; UDP_BIND_CNF 0x80004046 ; UDP_CLOSEPORT_REQ 0x80010046 ; UDP_CLOSEPORT_CNF 0x80014046 ; UDP_ERROR_IND 0x80024046 ; UDP_ERROR_RES 0x80020046 ; UDP_SHUTDOWN_IND 0x80034046 ; UDP_SHUTDOWN_RES 0x80030046 PRIM UDP_BIND_REQ 0x80000046 { port ; port } PRIM UDP_BIND_CNF 0x80004046 { port ; port err ; error code } PRIM UDP_CLOSEPORT_REQ 0x80010046 { port ; port } PRIM UDP_CLOSEPORT_CNF 0x80014046 { } PRIM UDP_ERROR_IND 0x80024046 { dst_port ; Destination port src_port ; source port err_msg ; error message src_addr ; source address dst_addr ; Destination address } PRIM UDP_ERROR_RES 0x80020046 { } PRIM UDP_SHUTDOWN_IND 0x80034046 { } PRIM UDP_SHUTDOWN_RES 0x80030046 { }