view src/g23m-aci/aci/ati_omcompat.c @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
 * This module implements those AT commands that were originally invented
 * by Openmoko and have been retained in FreeCalypso.
 */

#ifndef ATI_OMCOMPAT_C
#define ATI_OMCOMPAT_C

#include "aci_all.h"

#include <ctype.h>
#include <string.h>

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "l4_tim.h"
#include "line_edit.h"
#include "aci_lst.h"

#include "pcm.h"
#include "audio.h"
#include "aci.h"
#include "rx.h"
#include "pwr.h"
#include "l4_tim.h"

#ifdef GPRS
#ifdef DTI
#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#endif /* DTI */
#include "gaci.h"
#include "gaci_cmh.h"
#include "gaci_cmd.h"
#endif  /* GPRS */

#include "aci_mem.h"
#include "aci_prs.h"

#include "ati_int.h"

#ifndef _SIMULATION_
#include "ffs/ffs.h"
#endif

#ifdef FF_ATI_BAT

#include "typedefs.h"
#include "gdd.h"
#include "bat.h"

#include "ati_bat.h"

#endif /*FF_ATI_BAT*/

#include "audio/audio_api.h"
#include "abb.h"
#include "dar/dar_api.h"

EXTERN void alr_get_band_of_serving_cell (char *strbuf);

/*
 * PURPOSE : @ST command (Configure the sidetone level)
 */
GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId)
{
	char tmp[8]={0};
	INT8 gain = -26;
	TRACE_FUNCTION("atAtST()");

	/*
	 * input functionality
	 */
	cl = parse(cl,"s", (LONG)8, tmp);

	gain = atoi(tmp);

	if ( cl )
	{
		if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 )
		{
			Side_Tone_Write(gain);
			return (ATI_CMPL);
		}
		else
		{
			cmdCmsError(CMS_ERR_OpNotAllowed);
			return (ATI_FAIL);
		}
	}
}

GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId)
{
	char *me="+ST: ";
	INT8 ST1;

	TRACE_FUNCTION("queatAtST()");

	ST1 = Side_Tone_Read();

	sprintf(g_sa,"%s%d",me,ST1);

	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

/*
 * PURPOSE : @POFF command (Power Off GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtPOFF");

	sprintf(g_sa,"%s","OK");
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	ABB_Power_Off();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @RST command (Reset GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtRST");

	dar_reset_system();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @BAND command (Get RF band)
 */

GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtBAND");			
	alr_get_band_of_serving_cell(g_sa);
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

#endif /* ATI_OMCOMPAT_C */