view src/g23m-aci/aci/cmh_l2r.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_L2R
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler of Layer 2 Relay
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_L2R_H
#define CMH_L2R_H

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/

typedef struct entL2rStatus          /* entity status */
{
  T_ACI_CMD_SRC  entOwn;          /* entity owner */
  T_ACI_AT_CMD   curCmd;          /* current command processing */
  BOOL           isTempDisconnected;            
} T_L2R_ENT_STAT;

/*==== PROTOTYPES =================================================*/

GLOBAL void cmhL2R_TRA_Enabled ( void );
GLOBAL void cmhL2R_Deactivated ( void );
GLOBAL void cmhTRA_Deactivated ( void );

#ifdef DTI
GLOBAL void cmhL2R_TRA_Disabled ( T_DTI_ENTITY_ID entityId);
#endif

GLOBAL void cmhL2R_Failure ( void );

GLOBAL SHORT        cmhL2R_GetCompDir ( void );
GLOBAL UBYTE        cmhL2R_SelCompDir ( T_L2R_CMD_PRM * pCmdPrm );
GLOBAL UBYTE        cmhL2R_SelChnRate ( void );
GLOBAL T_ACI_RETURN cmhL2R_Activate   ( T_ACI_CMD_SRC srcId,
                                        T_ACI_AT_CMD cmdId,
                                        SHORT cId );
GLOBAL T_ACI_RETURN cmhL2R_Deactivate ( void );
GLOBAL T_ACI_RETURN cmhTRA_Deactivate ( void );

#ifdef DTI
GLOBAL void cmhCC_L2R_or_TRA_Activated ( T_DTI_ENTITY_ID activated_module, SHORT cId );
#endif /* DTI */
GLOBAL void cmhCC_L2R_or_TRA_Deactivated ( SHORT cId );

#ifdef DTI
GLOBAL BOOL TRA_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
GLOBAL BOOL L2R_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
#endif /* DTI */


GLOBAL T_ACI_RETURN cmhL2R_Enable     ( void );


/*==== EXPORT =====================================================*/
#ifdef CMH_L2RF_C

GLOBAL T_L2R_ENT_STAT l2rEntStat;

#else

EXTERN T_L2R_ENT_STAT l2rEntStat;

#endif /* CMH_L2RF_C */


#endif /* CMH_L2R_H */

/*==== EOF =======================================================*/