view src/g23m-fad/fad/fad_snds.c @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  FAD_SNDS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul defines the functions for processing
|             of incomming signals for the component
|             Fax Adaptation 3.45 of the mobile station
+----------------------------------------------------------------------------- 
*/ 

#ifndef FAD_SNDS_C
#define FAD_SNDS_C
#endif

#define ENTITY_FAD

/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "vsi.h"
#include "macdef.h"
#include "pconst.cdg"
#include "custom.h"
#include "gsm.h"
#include "cnf_fad.h"
#include "mon_fad.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "ccdapi.h"
#include "fad.h"

/*==== CONST =======================================================*/

/*==== TYPES =======================================================*/

/*==== VAR EXPORT ==================================================*/

/*==== VAR LOCAL ===================================================*/

/*==== FUNCTIONS ===================================================*/

/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_activate_req |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal ACTIVATE_REQ received from process KER

*/

GLOBAL void sig_ker_snd_activate_req (T_FAD_ACTIVATE_REQ *fad_activate_req)
{
  T_SND *snd = &fad_data->snd;

  snd->trans_rate      = fad_activate_req->trans_rate;
  snd->frames_per_prim = fad_activate_req->frames_per_prim;

  /* T.32: 5-sec. buffer */
#ifdef _SIMULATION_
  snd->threshold = snd_DurationToBytes(snd->trans_rate, TIME_THRESHOLD);
#else
  snd->threshold = snd_DurationToBytes(snd->trans_rate, TIME_THRESHOLD_TI);
#endif
}
/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_sync_req     |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal SYNC_REQ received from process KER

*/

GLOBAL void sig_ker_snd_sync_req (BOOL reset)
{
  T_SND *snd = &fad_data->snd;
  USHORT bytes_to_send;

  TRACE_FUNCTION ("sig_ker_snd_sync_req()");

/*
  TRACE_EVENT ("IDLE:send SYNCs");
*/
  if (reset)				  /* send SYNC frames following return to IDLE */
    snd->reset = SYNC_RESET;

  snd->bytes_to_send = REPEAT_FOREVER;
  snd->seq_bufpos    = 0;
  snd->seq_buflen    = 0;
  snd_SetSequence(snd->seq_buf, &snd->seq_buflen, (UBYTE *)FR_SEQ_SYNC, LEN_SEQ_SYNC, 3);

  INIT_STATE (SND, SYNC_SND);
  INIT_STATE (SNDSUB, SUB_IDLE);

  if (snd->ra_req_frames)
  {
    bytes_to_send = snd->ra_req_frames * FRAME_SIZE;
    snd_SendSequence(bytes_to_send, FR_SYNC);
    snd->ra_req_frames = 0;
  }

}

/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_train_req    |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal TRAIN_REQ received from process KER

*/

GLOBAL void sig_ker_snd_train_req (T_FAD_DATA_REQ *fad_data_req, BOOL send_fax)
{
  T_SND *snd = &fad_data->snd;

  TRACE_FUNCTION ("sig_ker_snd_train_req()");
/*
  TRACE_EVENT ("MSG-REC:start TRAIN");
*/
  if (GET_STATE (SND) EQ SYNC_SND)
  {
    snd->bytes_to_send = REPEAT_FOREVER;
    snd->seq_buflen    = SND_FRAME_LEN * MAX_SND_FRAMES;
    snd->send_status   = TRUE;
    snd->seq_bufpos    = 0;

    SET_STATE (SNDSUB, SUB_IDLE);

    if (send_fax)
    {
      snd->data_to_send = fad_data_req->sdu.l_buf >> 3;
      snd_StoreMsgData (fad_data_req);
      SET_STATE (SND, TRAIN_SND);
    }
    else
      SET_STATE (SND, TRAIN_CNF_SND);

  }
}


/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_tcf_req      |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal SND_TCF_REQ received from process KER

*/

GLOBAL void sig_ker_snd_tcf_req (void)
{
  TRACE_FUNCTION ("sig_ker_snd_tcf_req()");
/*
  TRACE_EVENT ("MSG-REC:start TCF");
*/
  if (GET_STATE (SND) EQ SYNC_SND)
  {
    fad_data->snd.seq_bufpos = 0;
    SET_STATE (SND, TCF_SND);
  }
}


/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_preamble_req |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal SND_PREAMBLE_REQ received from process KER
            - store fad_data_req
            - prepare preamble
*/

GLOBAL void sig_ker_snd_preamble_req (T_FAD_DATA_REQ *fad_data_req)
{
  T_SND *snd = &fad_data->snd;

  TRACE_FUNCTION ("sig_ker_snd_preamble_req()");

  if (GET_STATE (SND) EQ SYNC_SND)
  {
    snd->fad_data_req = fad_data_req;

#ifdef _SIMULATION_
    snd->fad_data_req->sdu.l_buf >>= 3; /* set SDU byte len for    */
    snd->fad_data_req->sdu.o_buf >>= 3; /* snd_BuildStatusFrames() */
#endif

    SET_STATE (SND, PREAM_SND);
  }
}


/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_bcs_req      |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal BCS_REQ received from process KER

*/

GLOBAL void sig_ker_snd_bcs_req (T_FAD_DATA_REQ *fad_data_req)
{
  TRACE_FUNCTION ("sig_ker_snd_bcs_req()");

  if (GET_STATE (SND) EQ BCS_SND)
  {
#ifdef _SIMULATION_
    snd_BuildStatusFrames(fad_data->snd.fad_data_req, BCS_BUF_LEN);
#else
    snd_BuildStatusFrames(fad_data->snd.fad_data_req);
#endif
    SET_STATE (SNDSUB, SUB_DATA);
  }
}

/*
+------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                |
| STATE   : code                       ROUTINE : sig_ker_snd_status_req  |
+------------------------------------------------------------------------+

  PURPOSE : Process signal STATUS_REQ received from process KER

*/

GLOBAL void sig_ker_snd_status_req (void)
{
  TRACE_FUNCTION ("sig_ker_snd_status_req()");

  if (GET_STATE (SND) EQ TRAIN_SND)
  {
    TRACE_EVENT ("MSG-REC:start C");

    SET_STATE (SND, MSG_SND);
    SET_STATE (SNDSUB, SUB_IDLE);
  }

}

/*
+-------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDS                 |
| STATE   : code                       ROUTINE : sig_ker_snd_msg_req      |
+-------------------------------------------------------------------------+

  PURPOSE : Process signal MSG_REQ received from process KER

*/

GLOBAL void sig_ker_snd_msg_req (T_FAD_DATA_REQ *fad_data_req)
{
  TRACE_FUNCTION ("sig_ker_snd_msg_req()");

/* T.32: 5-sec. buffer */
  fad_data->snd.data_to_send += (fad_data_req->sdu.l_buf >> 3);
  snd_StoreMsgData (fad_data_req);
}