view src/g23m-gprs/grr/grr_psis.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for service PSI.
+----------------------------------------------------------------------------- 
*/ 

#ifndef GRR_PSIS_H
#define GRR_PSIS_H

EXTERN void sig_ctrl_psi_si13_received ( T_RRGRR_GPRS_SI13_IND *rrgrr_si13_ind,
                                         BOOL                   ba_bcch_changed );

EXTERN void sig_ctrl_psi_pim ( void );

EXTERN void sig_ctrl_psi_pam ( void );

EXTERN void sig_ctrl_psi_ptm ( void );

EXTERN void sig_ctrl_psi_suspend ( void );

EXTERN void sig_ctrl_psi_resumpt ( void );

EXTERN void sig_ctrl_psi_resumpt_cc ( void );

EXTERN void sig_ctrl_psi_stop ( void );

EXTERN void sig_ctrl_psi_sync_ok (void);

EXTERN void sig_ctrl_psi_read_full_psi_in_new_cell(void);

EXTERN void sig_ctrl_psi_rel_state(T_RELEASE_STATE rel_state);

EXTERN void sig_ctrl_psi_access_disabled ( T_PSI_DISABLE_CAUSE dc );

/* GFP PTM*/
EXTERN void sig_gfp_psi_1_ptm     ( void ); 
EXTERN void sig_gfp_psi_2_ptm     ( void ); 
EXTERN void sig_gfp_psi_3_ptm     ( void ); 
EXTERN void sig_gfp_psi_3_bis_ptm ( void );
#if defined (REL99) AND defined (TI_PS_FF_EMR)
EXTERN void sig_gfp_psi_3_ter_ptm ( void );
#endif
EXTERN void sig_gfp_psi_4_ptm     ( void );
EXTERN void sig_gfp_psi_13_ptm    ( void ); 
#ifdef REL99
EXTERN void sig_gfp_psi_8_ptm     ( void ); 
#endif
/* GFP*/
EXTERN void sig_gfp_psi_1 ( void ) ;
EXTERN void sig_gfp_psi_2 ( UBYTE rel_pos_i) ;
EXTERN void sig_gfp_psi_3 ( UBYTE rel_pos_i) ;
EXTERN void sig_gfp_psi_3_bis ( UBYTE rel_pos_i );
#if defined (REL99) AND defined (TI_PS_FF_EMR)
EXTERN void sig_gfp_psi_3_ter ( UBYTE rel_pos_i );
#endif
EXTERN void sig_gfp_psi_4 ( UBYTE rel_pos_i ) ;
EXTERN void sig_gfp_psi_5 ( UBYTE rel_pos_i ) ;
EXTERN void sig_gfp_psi_prach ( void ) ;
EXTERN void sig_gfp_psi_scell_pbcch_stop_con ( T_MPHP_SCELL_PBCCH_STOP_CON *mphp_scell_pbcch_stop_con) ;
EXTERN void sig_gfp_psi_ncell_pbcch_ind ( T_MPHP_NCELL_PBCCH_IND *mphp_ncell_pbcch_ind) ;
EXTERN void sig_gfp_psi_save_persistence_level ( T_pers_lev * ptr2persistence_level_i  ); /*MODIF*/
#ifdef REL99
EXTERN void sig_gfp_psi_8 ( UBYTE rel_pos_i) ;
#endif

#endif /* !GRR_PSIS_H */