view src/gpf/ccd/critical_ext.c @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 4e78acac3d88
children
line wrap: on
line source


/*
+------------------------------------------------------------------------------
|  File:       critical_ext.c
+------------------------------------------------------------------------------
|                 Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG.
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+------------------------------------------------------------------------------
| Purpose:    Encoding and decoding functions for criticalExtensions  
|
| $Identity:$
+------------------------------------------------------------------------------
*/

/*
 * Standard definitions like UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes and constants in the common part of ccd
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : critical_ext            |
| STATE   : code                       ROUTINE : cdc_critical_ext_decode |
+------------------------------------------------------------------------+

  PURPOSE : Decode elements of type criticalExtensions

            An element of this type should never be encoded or decoded.
            If the coder faces an IE of this type, it should report an
            error report and abort.
            Whenever a criticalExtensions-IE is extended from NULL or 
            SEQUENCE {} to another type, its CCD coding type will change
            and the functions in this file will not be called for that IE
            any more.

            According to 3GPP TS25.331 V3.6.0, 10.1.1.2.2:
            Since messages including critical extensions are rejected by 
            receivers not comprehending them, these messages can be 
            modified completely, e.g. IEs may be inserted at any place 
            and IEs may be removed or redefined.
            See also 3GPP TS25.921 V4.3.0, 10.4.
*/
SHORT cdc_critical_ext_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_critical_ext_decode()");
	#else
	TRACE_CCD (globs, "cdc_critical_ext_decode() %s", mcomp[melem[e_ref].elemRef].name);
	#endif
#endif

  globs->pstructOffs = melem[e_ref].structOffs;

  /* For optional elements we have already set the valid flag in the 
   * C-structure. We have done it while processing ASN1_SEQ.
   */
  if ( ! cdc_isPresent(e_ref, globs) ) {
    return 1;
  }

  if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0)
  {
    ccd_recordFault (globs, 
                    ERR_CRITICAL_EXT, 
                    BREAK, 
                    (USHORT) e_ref, 
                    globs->pstruct + melem[e_ref].structOffs
                  ); 
    return 0;
  }
  /* 
   * Currently CCD tool chain does not support extensions of this type.
   * This else-implementation is just an outlook.
   * 
  else
  {
    U16 compRef = melem[e_ref].elemRef;
    U16 elemRef = mcomp[compRef].componentRef;
    (void) codec[melem[Elem].codingType][DECODE_FUN]
                                            (compRef, elemRef, globs);
  }*/
  return 1;
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : critical_ext            |
| STATE   : code                       ROUTINE : cdc_critical_ext_encode |
+------------------------------------------------------------------------+

  PURPOSE : Encode elements of type criticalExtensions

            An element of this type should never be encoded or decoded.
            If the coder faces an IE of this type, it should report an
            error report and abort.             
*/
SHORT cdc_critical_ext_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{

#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_critical_ext_encode()");
	#else
	TRACE_CCD (globs, "cdc_critical_ext_encode() %s", mcomp[melem[e_ref].elemRef].name);
	#endif
#endif

  globs->pstructOffs = melem[e_ref].structOffs;

  /* For optional elements we have already set the valid flag in the 
   * C-structure. We have done it while processing ASN1_SEQ.
   */
  if ( ! cdc_isPresent(e_ref, globs) ) {
    return 1;
  }

  if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0)
  {
    ccd_recordFault (globs, 
                    ERR_CRITICAL_EXT, 
                    BREAK, 
                    (USHORT) e_ref, 
                    globs->pstruct + melem[e_ref].structOffs
                  ); 
    return 0;
  }
  /* 
   * Currently CCD tool chain does not support extensions of this type.
   * This else-implementation is just an outlook.
   * 
  else
  {
    U16 compRef = melem[e_ref].elemRef;
    U16 elemRef = mcomp[compRef].componentRef;
    (void) codec[melem[Elem].codingType][ENCODE_FUN]
                                            (compRef, elemRef, globs);
  }*/
  return 1;
}
#endif /* !RUN_INT_RAM */