view src/gpf/inc/drvconf.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       drvconf.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the dynamic driver configuration.
+----------------------------------------------------------------------------- 
*/ 

#ifndef DRVCONF_H
#define DRVCONF_H

/*==== INCLUDES =============================================================*/
#include "typedefs.h"
#include "gdi.h"
#include "vsi.h"

/*==== CONSTS ===============================================================*/

#if defined _TARGET_
 #define MAX_AVAILABLE_DRV 1
#else
 #define MAX_AVAILABLE_DRV 6
#endif

#define TIF_NAME              "TIF"
#define TR_NAME               "TR"
#define EMI_NAME              "EMI"
#define SOCKET_NAME           "SOCKET"
#define MTST_NAME             "MTST"
#define SER_NAME              "SER"
#define THIF_LINK_NAME        "THIFLINK"
#define USERSPACE_LINK_NAME   "USSPLINK"
#define TITRC_NAME            "TITRC"
#define NODRV_NAME            "NODRV"

#define DRV_DEFAULT       "DEFAULT"
#define DRV_TI_MODE       "TI_MODE"
#define DRV_RAW_TI_MODE   "RAW_TI_MODE"
#define TIF_PCON_ENABLE   "ENABLE_PCON"
#define TR_STX_LF         "STX_LF"
#define ENABLE_SYNC_MODE  "ENA_SYNC_MODE"
#define DISABLE_SYNC_MODE "DIS_SYNC_MODE"

#define FILTER            "FILTER"

#define DRV_SIGTYPE_READ_L1   0x100
#define DRV_SIGTYPE_READ_RIV  0x200

/*==== TYPES ================================================================*/

typedef struct
{
  T_DRV_LIST_ENTRY entry;  
  USHORT drv_pos;
} T_TST_DRV_ENTRY;

/*==== EXPORTS ==============================================================*/

SHORT tst_drv_open (char *drv_name, T_TST_DRV_ENTRY **drv_info );


#endif /* DRVCONF_H */