FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/p_mac.val @ 280:82665effff30
keypad boot init overhaul: handle initially held-down keys
This change fixes two previous behavioural defects:
1) On Compal phones, the PWR key had to be released before the boot
sequence would proceed at all - it was stuck in an endless IRQ loop
at the point of Nucleus enabling interrupts, before anything else.
2) On both Compal and sane platforms including Luna, if some regular
non-PWR key was held down at boot time, the boot sequence would
proceed and complete normally, but all non-PWR keypad buttons would
be dead for the remainder of that boot cycle.
The fix is a generic solution - no Compal-specific hack ended up being
needed for the special case of their idiotic PWON-to-ROW4 hw wiring.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 24 Sep 2021 00:47:12 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mac.val | | SOURCE : "sap\mac.pdf" | | LastModified : "2003-02-26" | | IdAndVersion : "8441.111.03.009" | | SrcFileTime : "Thu Nov 29 09:45:32 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MAC_VAL #define P_MAC_VAL #define CDG_ENTER__P_MAC_VAL #define CDG_ENTER__FILENAME _P_MAC_VAL #define CDG_ENTER__P_MAC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MAC_VAL__LAST_MODIFIED _2003_02_26 #define CDG_ENTER__P_MAC_VAL__ID_AND_VERSION _8441_111_03_009 #define CDG_ENTER__P_MAC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_45_32_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MAC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_bcch_level */ #define MAC_RXLEV_MIN (0x0) /* minimum receive signal level as defined in GSM 05.08 */ #define MAC_RXLEV_MAX (0x3f) /* maximum receive signal level as defined in GSM 05.08 */ #define MAC_RXLEV_NONE (0x80) /* no valid receive signal level present */ /* * Value constants for VAL_crc_error */ #define GRLC_CRC_PASS (0x0) /* radio block is correctly received */ #define GRLC_CRC_FAIL (0x1) /* radio block is not correctly received */ /* * user defined constants */ #define MAC_MAX_TIMESLOTS (0x8) #define MAC_BURST_PER_BLOCK (0x4) #define MAC_MAX_DL_DATA_BLCKS (0x4) #include "CDG_LEAVE.h" #endif