keypad boot init overhaul: handle initially held-down keys This change fixes two previous behavioural defects: 1) On Compal phones, the PWR key had to be released before the boot sequence would proceed at all - it was stuck in an endless IRQ loop at the point of Nucleus enabling interrupts, before anything else. 2) On both Compal and sane platforms including Luna, if some regular non-PWR key was held down at boot time, the boot sequence would proceed and complete normally, but all non-PWR keypad buttons would be dead for the remainder of that boot cycle. The fix is a generic solution - no Compal-specific hack ended up being needed for the special case of their idiotic PWON-to-ROW4 hw wiring.

CC=	gcc
CFLAGS=	-O2
PROGS=	build-date cfg-hdr-gen makeline mk-flash-script mokosrec2bin srec4ram \
	str2ind-ver

all:	${PROGS}

build-date:	build-date.c
	${CC} ${CFLAGS} -o $@ $@.c

cfg-hdr-gen:	cfg-hdr-gen.c
	${CC} ${CFLAGS} -o $@ $@.c

makeline:	makeline.c
	${CC} ${CFLAGS} -o $@ $@.c

mk-flash-script:	mk-flash-script.c
	${CC} ${CFLAGS} -o $@ $@.c

mokosrec2bin:	mokosrec2bin.c
	${CC} ${CFLAGS} -o $@ $@.c

srec4ram:	srec4ram.c
	${CC} ${CFLAGS} -o $@ $@.c

str2ind-ver:	str2ind-ver.c
	${CC} ${CFLAGS} -o $@ $@.c

clean:
	rm -f ${PROGS}