FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/audio_include/l1audio_abb.h @ 280:82665effff30
keypad boot init overhaul: handle initially held-down keys
This change fixes two previous behavioural defects:
1) On Compal phones, the PWR key had to be released before the boot
sequence would proceed at all - it was stuck in an endless IRQ loop
at the point of Nucleus enabling interrupts, before anything else.
2) On both Compal and sane platforms including Luna, if some regular
non-PWR key was held down at boot time, the boot sequence would
proceed and complete normally, but all non-PWR keypad buttons would
be dead for the remainder of that boot cycle.
The fix is a generic solution - no Compal-specific hack ended up being
needed for the special case of their idiotic PWON-to-ROW4 hw wiring.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 24 Sep 2021 00:47:12 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* * Filename l1audio_abb.h * Copyright 2003 (C) Texas Instruments * * */ #define ABB_L1_WRITE(addr,data) (((data) << 6) | (addr) | 0x01) void ABB_CAL_UlVolume (UWORD8 pga_index); void ABB_CAL_DlVolume (UWORD8 volume_index, UWORD8 pga_index); void ABB_UlVolume (UWORD8 volume_index); void ABB_DlVolume (UWORD8 volume_index); void ABB_DlMute (BOOL mute); void ABB_SideTone (UWORD8 volume_index); void ABB_Audio_Config (UWORD16 data); void ABB_Audio_Config_2 (UWORD16 data); void ABB_UlMute (BOOL mute); void ABB_Audio_Control (UWORD16 data); void ABB_Audio_On_Off (UWORD16 data); void ABB_Audio_Volume (UWORD16 data); void ABB_Audio_PLL (UWORD16 data); void ABB_Audio_VBPop (UWORD16 data); void ABB_Audio_Delay_Init (UWORD8 delay);