FreeCalypso > hg > fc-tourmaline
view src/gpf/ccd/critical_ext.c @ 280:82665effff30
keypad boot init overhaul: handle initially held-down keys
This change fixes two previous behavioural defects:
1) On Compal phones, the PWR key had to be released before the boot
sequence would proceed at all - it was stuck in an endless IRQ loop
at the point of Nucleus enabling interrupts, before anything else.
2) On both Compal and sane platforms including Luna, if some regular
non-PWR key was held down at boot time, the boot sequence would
proceed and complete normally, but all non-PWR keypad buttons would
be dead for the remainder of that boot cycle.
The fix is a generic solution - no Compal-specific hack ended up being
needed for the special case of their idiotic PWON-to-ROW4 hw wiring.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 24 Sep 2021 00:47:12 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: critical_ext.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG. | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +------------------------------------------------------------------------------ | Purpose: Encoding and decoding functions for criticalExtensions | | $Identity:$ +------------------------------------------------------------------------------ */ /* * Standard definitions like UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes and constants in the common part of ccd */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : critical_ext | | STATE : code ROUTINE : cdc_critical_ext_decode | +------------------------------------------------------------------------+ PURPOSE : Decode elements of type criticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report an error report and abort. Whenever a criticalExtensions-IE is extended from NULL or SEQUENCE {} to another type, its CCD coding type will change and the functions in this file will not be called for that IE any more. According to 3GPP TS25.331 V3.6.0, 10.1.1.2.2: Since messages including critical extensions are rejected by receivers not comprehending them, these messages can be modified completely, e.g. IEs may be inserted at any place and IEs may be removed or redefined. See also 3GPP TS25.921 V4.3.0, 10.4. */ SHORT cdc_critical_ext_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_critical_ext_decode()"); #else TRACE_CCD (globs, "cdc_critical_ext_decode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { ccd_recordFault (globs, ERR_CRITICAL_EXT, BREAK, (USHORT) e_ref, globs->pstruct + melem[e_ref].structOffs ); return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][DECODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : critical_ext | | STATE : code ROUTINE : cdc_critical_ext_encode | +------------------------------------------------------------------------+ PURPOSE : Encode elements of type criticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report an error report and abort. */ SHORT cdc_critical_ext_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_critical_ext_encode()"); #else TRACE_CCD (globs, "cdc_critical_ext_encode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { ccd_recordFault (globs, ERR_CRITICAL_EXT, BREAK, (USHORT) e_ref, globs->pstruct + melem[e_ref].structOffs ); return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][ENCODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */