FreeCalypso > hg > fc-tourmaline

view src/cs/services/cst/cnf_cst.h @ 261:841a848ba762

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
SPI SWE: clear any pending boot-time interrupts in spi_init() Charger plug/unplug hw logic in the Iota ABB has no built-in debouncing, thus electrical contact bounce on the charging power connection interface produces a lot of charger plug/unplug interrupts. When we boot in charging mode (charging power present at boot time and is presumably the cause of Switch-ON), some bounce may occur between the initial Iota Switch-ON action and Calypso firmware booting. By clearing any accumulated ITSTATREG interrupts on boot, we prevent these pre-boot interrupts from generating charger plug/unplug events to FCHG, which would upset smooth from-boot charging.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 May 2021 02:49:05 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT : XXX                        SOURCE : CNF_CST.H            |
| AUTHOR  : CONDAT GmbH (pz)           VERSION: 1.0                  |
| CREATED : 01.02.99                   STATE  : code                 |
+--------------------------------------------------------------------+

   MODULE  : CNF_CST

   PURPOSE : Dynamic configuration for the entity CST.
*/

#ifndef CNF_CST_H
#define CNF_CST_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  CST_CONFIG          "MMI_MODEL"
#define  CST_MUTE            "AUDIO_MUTE"
#define  CST_GSM_PARAMETERS  "GSM_PARAMETERS"
#define  CST_L1_PARAMETERS   "L1_PARAMS"


/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif