FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/line_edit.c @ 261:841a848ba762
SPI SWE: clear any pending boot-time interrupts in spi_init()
Charger plug/unplug hw logic in the Iota ABB has no built-in debouncing,
thus electrical contact bounce on the charging power connection interface
produces a lot of charger plug/unplug interrupts. When we boot in
charging mode (charging power present at boot time and is presumably
the cause of Switch-ON), some bounce may occur between the initial
Iota Switch-ON action and Calypso firmware booting. By clearing any
accumulated ITSTATREG interrupts on boot, we prevent these pre-boot
interrupts from generating charger plug/unplug events to FCHG, which
would upset smooth from-boot charging.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 14 May 2021 02:49:05 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : line +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul ... +----------------------------------------------------------------------------- */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <ctype.h> #include "typedefs.h" #include "vsi.h" #include "pei.h" #include "aci_mem.h" #include "p_aci.val" #include "line_edit.h" #include "line_edit_intern.h" #include "line_split_intern.h" GLOBAL char g_ledit_echoBuf[MAX_CMD_LEN+1]; static T_LEDIT_SRC_MAINTAIN *rootSrc = NULL; /* state machine functions */ static T_LEDIT_RSLT ledit_idle (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_prefix_a (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_prefix_t (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_repeat (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_collect (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_run_cmd (T_LEDIT_INTERN *leditInt); /* help functions */ static T_LEDIT_SRC_MAINTAIN *ledit_getNewSrcMaintain (T_LEDIT_SRC_MAINTAIN *lesm); static T_LEDIT_SRC_MAINTAIN *ledit_getSrcM (UBYTE src_id, const UBYTE *chars, USHORT len); static T_LEDIT_SRC_MAINTAIN *ledit_getSrc (UBYTE src_id); static T_LEDIT_RSLT ledit_remove_src (T_LEDIT_SRC_MAINTAIN *lesm); static T_LEDIT_RSLT ledit_check_param (const UBYTE *chars, USHORT len); static T_LEDIT_RSLT ledit_clear_lineBuf(T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_clear_all (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_backup (T_LEDIT_INTERN *leditInt); static T_LEDIT_RSLT ledit_echo (T_LEDIT_INTERN *leditInt); static void ledit_echo_clear (void); /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_set_config | +--------------------------------------------------------------------+ PURPOSE : - configure CR, LF, BS chars --> similiar to S3, S4, S5 - configure echo --> similiar to ATE echo cmds in command mode - configure echo --> similiar to ATF echo cmds in data mode */ T_LEDIT_RSLT ledit_set_config (UBYTE src_id, T_LEDIT line) { T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; UBYTE *chars = NULL; USHORT len = 0; /* * get the maintenance for this AT source or create a new one or die */ if ((lineSrcM = ledit_getSrcM (src_id, chars, len)) EQ NULL) { return (LEDIT_FAIL); } /* * some checks of T_LEDIT line */ if (line.atE NEQ 0xFF) { if ((line.atE EQ TRUE) OR (line.atE EQ FALSE)) { lineSrcM->leditInt->lineHabit.atE = line.atE; } else { return (LEDIT_FAIL); } } if (line.S3 NEQ 0xFF) { if (line.S3 < 128) { lineSrcM->leditInt->lineHabit.S3 = line.S3; } else { return (LEDIT_FAIL); } } if (line.S4 NEQ 0xFF) { if (line.S4 < 128) { lineSrcM->leditInt->lineHabit.S4 = line.S4; } else { return (LEDIT_FAIL); } } if (line.S5 NEQ 0xFF) { if (line.S5 < 128) { lineSrcM->leditInt->lineHabit.S5 = line.S5; } else { return (LEDIT_FAIL); } } if (line.smsEnd NEQ 0xFF) { if (line.smsEnd < 128) { lineSrcM->leditInt->lineHabit.smsEnd = line.smsEnd; } else { return (LEDIT_FAIL); } } return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_ctrl | +--------------------------------------------------------------------+ PURPOSE : - inform and control line edit - in err will be error code and error message of line edit */ T_LEDIT_RSLT ledit_ctrl (UBYTE src_id, T_LEDIT_CTRL ctrl, T_LEDIT_ERR **err) { T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; TRACE_FUNCTION ("ledit_ctrl()"); /* * get the maintenance for this AT source or create a new one or die */ if ((lineSrcM = ledit_getSrcM (src_id, NULL, 0)) EQ NULL) { return (LEDIT_FAIL); } switch (ctrl) { case LEDIT_CTRL_PROMPT: { ledit_echo_clear(); strcpy (g_ledit_echoBuf,"> "); TRACE_EVENT("ledit_ctrl(): prompt for SMS editing"); return (LEDIT_CMPL); } case LEDIT_CTRL_CRLF_PROMPT: { ledit_echo_clear(); /* (IRA 13, 10, 62, 32) see 07.05 */ g_ledit_echoBuf[0] = 0x0D; /* lineSrcM->leditInt->lineHabit.S3; */ /* CR */ g_ledit_echoBuf[1] = 0x0A; /* lineSrcM->leditInt->lineHabit.S4; */ /* LF */ g_ledit_echoBuf[2] = 0x3E; /* '>' */ g_ledit_echoBuf[3] = 0x20; /* ' ' */ g_ledit_echoBuf[4] = '\0'; TRACE_EVENT("ledit_ctrl(): default settings for line behaviour"); return (LEDIT_CMPL); } case LEDIT_CTRL_CMPL: { TRACE_EVENT("ledit_ctrl(): reset ledit internals"); ledit_clear_all(lineSrcM->leditInt); return (LEDIT_CMPL); } case LEDIT_CTRL_REMOVE_SRC: { ledit_remove_src(lineSrcM); return (LEDIT_CMPL); } case LEDIT_CTRL_ERROR: { if (err) { *err = &lineSrcM->leditInt->err; } return (LEDIT_CMPL); } case LEDIT_CTRL_MORE_CMDS: /* query whether there are more than one cmd */ { if (lineSrcM->leditInt->cmdGetIter < lineSrcM->leditInt->cmdIndex) /* check if cmdline already fully parsed */ { TRACE_EVENT("ledit_ctrl(): are there more commands ? Yes !"); return (LEDIT_CMPL); } else { TRACE_EVENT("ledit_ctrl(): are there more commands ? No !"); return (LEDIT_FAIL); } } default: { if (*err) { (*err)->code = LEDIT_ERR_Unknown; (*err)->msg = ledit_err[LEDIT_ERR_Unknown].msg; } return (LEDIT_FAIL); } } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_get_first | +--------------------------------------------------------------------+ PURPOSE : - */ T_LEDIT_RSLT ledit_get_first (UBYTE src_id, T_LEDIT_ATCMD **cmd) { T_LEDIT_SRC_MAINTAIN *lesm = ledit_getSrc(src_id); TRACE_FUNCTION ("ledit_get_first()"); *cmd = NULL; /* init with no command available */ if (lesm EQ NULL) { return (LEDIT_FAIL); } if (lesm->leditInt->cmdm EQ NULL) { return (LEDIT_FAIL); } *cmd = lesm->leditInt->cmdm->cmd; return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_get_next | +--------------------------------------------------------------------+ PURPOSE : - */ T_LEDIT_RSLT ledit_get_next (UBYTE src_id, T_LEDIT_ATCMD **cmd) { T_LEDIT_ATCMD_M **curCmd = NULL; T_LEDIT_SRC_MAINTAIN *lesm = ledit_getSrc(src_id); TRACE_FUNCTION ("ledit_get_next()"); *cmd = NULL; /* init with no command available */ if (lesm EQ NULL) { return (LEDIT_FAIL); } ++(lesm->leditInt->cmdGetIter); /* 1 .. n */ ledit_free_cmd(lesm->leditInt); /* clear all (=previous) commands */ lesm->leditInt->cmdm = NULL; if (ledit_split(lesm->leditInt) EQ LEDIT_CMPL) { curCmd = &(lesm->leditInt->cmdm); if (*curCmd) { *cmd = (*curCmd)->cmd; return (LEDIT_CMPL); } } return (LEDIT_FAIL); /* no further command available */ } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_get_current | +--------------------------------------------------------------------+ PURPOSE : - for text mode relevant functions, which have to be called twice 1. with the destination adress 2. with the text */ T_LEDIT_RSLT ledit_get_current (UBYTE src_id, T_LEDIT_ATCMD **cmd) { T_LEDIT_SRC_MAINTAIN *lesm = ledit_getSrc(src_id); TRACE_FUNCTION ("ledit_get_current()"); *cmd = NULL; /* init with no command available */ if (lesm EQ NULL) { return (LEDIT_FAIL); } if (lesm->leditInt->cmdm EQ NULL) { return (LEDIT_FAIL); } *cmd = lesm->leditInt->cmdm->cmd; return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_text | +--------------------------------------------------------------------+ PURPOSE : - - switch from cmd mode to text mode */ T_LEDIT_RSLT ledit_text (UBYTE src_id, const UBYTE *chars, USHORT len) { T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; char c = '\0'; static unsigned int beginline; /* first character position in current line */ TRACE_FUNCTION ("ledit_text()"); /* * get the maintenance for this AT source */ if ((lineSrcM = ledit_getSrcM (src_id, chars, len)) EQ NULL) { return (LEDIT_FAIL); } ledit_echo_clear (); /* * we use the cmdBuffer to store the text, so clean it up at first calling of this function * in case of text sent in several chunks (this function is called again), concatenate them * by leaving the copy iterator and the cmdBuffer untouched * txtChunk is a binary flag */ if (lineSrcM->leditInt->txtChunk EQ FALSE) { ledit_clear_lineBuf (lineSrcM->leditInt); lineSrcM->leditInt->txtChunk = TRUE; beginline=0; } while (lineSrcM->leditInt->srcBufIter < len) { c = lineSrcM->leditInt->srcBuffer[lineSrcM->leditInt->srcBufIter]; if (lineSrcM->leditInt->copyIter EQ MAX_CMD_LEN) /* FIXME: Should be depending to csca arround 160 */ { if (c EQ 0x1b) ; else if (c EQ lineSrcM->leditInt->lineHabit.S5) ; else if (c EQ lineSrcM->leditInt->lineHabit.smsEnd) ; else return (LEDIT_IGNORE); } if (c EQ 0x1b) /* ESC */ { if (lineSrcM->leditInt->smsBuffer) { ACI_MFREE (lineSrcM->leditInt->smsBuffer); /* at first delete possible last text */ } lineSrcM->leditInt->smsBuffer = NULL; lineSrcM->leditInt->txtChunk = FALSE; return (LEDIT_ESC); /* don't generate any error message */ } else if (c EQ lineSrcM->leditInt->lineHabit.smsEnd) /* CTRL-Z, for all non V25.ter conform rockers */ { lineSrcM->leditInt->origBuffer[lineSrcM->leditInt->origBufIter++] = '\0'; /* terminate text */ lineSrcM->leditInt->lineBuffer[lineSrcM->leditInt->copyIter++] = '\0'; /* terminate text */ if (lineSrcM->leditInt->smsBuffer) { ACI_MFREE (lineSrcM->leditInt->smsBuffer); /* at first delete possible last text */ } ACI_MALLOC(lineSrcM->leditInt->smsBuffer, ((lineSrcM->leditInt->copyIter+1) * sizeof(char))); if (lineSrcM->leditInt->smsBuffer EQ NULL) { return (LEDIT_FAIL); } strcpy (lineSrcM->leditInt->smsBuffer, lineSrcM->leditInt->lineBuffer); lineSrcM->leditInt->txtChunk = FALSE; return (LEDIT_CMPL); } else if (c EQ lineSrcM->leditInt->lineHabit.S3) { lineSrcM->leditInt->origBuffer[lineSrcM->leditInt->origBufIter++] = 0x0a; /* add newline into SMS */ lineSrcM->leditInt->lineBuffer[lineSrcM->leditInt->copyIter++] = 0x0a; /* add newline into SMS */ /* * split text, so emit promp "> " again */ g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter] = 0x0d; /* lineSrcM->leditInt->lineHabit.S3; */ g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter+1] = 0x0a; /* lineSrcM->leditInt->lineHabit.S4; */ g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter+2] = 0x3e; /* '>' */ g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter+3] = 0x20; /* ' ' */ beginline = lineSrcM->leditInt->copyIter; /* reset line */ } else if (c EQ lineSrcM->leditInt->lineHabit.S4) { ; /* ignore Linefeeds */ } else if (c EQ lineSrcM->leditInt->lineHabit.S5) /* backspace */ { /* * delete last character in cmd buffer by setting iterator one step back */ if (lineSrcM->leditInt->copyIter > beginline) { --(lineSrcM->leditInt->origBufIter); --(lineSrcM->leditInt->copyIter); g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter] = c; return (LEDIT_COLLECT); } else return (LEDIT_IGNORE); } else { lineSrcM->leditInt->origBuffer[lineSrcM->leditInt->origBufIter++] = c; /* copy character to cmd buffer */ lineSrcM->leditInt->lineBuffer[lineSrcM->leditInt->copyIter++] = c; /* copy character to cmd buffer */ g_ledit_echoBuf[lineSrcM->leditInt->srcBufIter] = c; } ++(lineSrcM->leditInt->srcBufIter); } return (LEDIT_COLLECT); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_get_text | +--------------------------------------------------------------------+ PURPOSE : - */ T_LEDIT_RSLT ledit_get_text (UBYTE src_id, char **txt) { T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; /* * get the maintenance for this AT source */ if ((lineSrcM = ledit_getSrcM (src_id, NULL, 0)) EQ NULL) { return (LEDIT_FAIL); } if (*txt) { ACI_MFREE (*txt); /* free the cmd parameter part */ } ACI_MALLOC (*txt, (strlen(lineSrcM->leditInt->smsBuffer)+1) * sizeof(char)); if (*txt EQ NULL) { return (LEDIT_FAIL); } /* * the complementary ACI_MFREE takes place in ledit_ctrl (src_params->src_id,LEDIT_CTRL_CMPL, NULL); * which has to called for success or fail of a AT cmd line. grep in ati_cmd.c and ati_ret.c */ if (lineSrcM->leditInt->smsBuffer) { strcpy (*txt, lineSrcM->leditInt->smsBuffer); /* the parameter of the AT cmd is now the SMS text */ } else { **txt = '\0'; /* in case of 0 byte text */ } return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_backup | +--------------------------------------------------------------------+ PURPOSE : - for possible next A/ back up the current cmd line NOW: we shift the lineBuffer to execBuffer for execution!!! */ static T_LEDIT_RSLT ledit_backup (T_LEDIT_INTERN *leditInt) { if (leditInt->execBuffer) { ACI_MFREE (leditInt->execBuffer); } leditInt->execBuffer = leditInt->lineBuffer; leditInt->lineBuffer = NULL; return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_echo_clear | +--------------------------------------------------------------------+ PURPOSE : - */ static void ledit_echo_clear (void) { memset(g_ledit_echoBuf, '\0', sizeof(g_ledit_echoBuf)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_echo | +--------------------------------------------------------------------+ PURPOSE : - for echoing put the current chars into the g_ledit_echoBuffer but attention: all chars before the first [aA] are ignored the same between [aA] and [tT] Example : "murx blah fiT + cFun = 1" will be echoed as - ------------ "aT + cFun = 1" */ static T_LEDIT_RSLT ledit_echo (T_LEDIT_INTERN *leditInt) { int i = 0; while (g_ledit_echoBuf[i]) /* skip possible [aAtT] */ { ++i; } while (leditInt->srcBufIterE < leditInt->len) { g_ledit_echoBuf[i] = leditInt->srcBuffer[leditInt->srcBufIterE]; if (leditInt->srcBuffer[leditInt->srcBufIterE] EQ leditInt->lineHabit.S3) { ++i; break; } ++(leditInt->srcBufIterE); ++i; } g_ledit_echoBuf[i] = '\0'; leditInt->srcBufIterE = 0; return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_remove_src | +--------------------------------------------------------------------+ PURPOSE : */ static T_LEDIT_RSLT ledit_remove_src (T_LEDIT_SRC_MAINTAIN *lesm) { T_LEDIT_SRC_MAINTAIN *ledSrcM = rootSrc; T_LEDIT_SRC_MAINTAIN *tmp = rootSrc; if (rootSrc EQ lesm) { tmp = rootSrc->next; ledit_clear_all (rootSrc->leditInt); ACI_MFREE (rootSrc->leditInt); rootSrc->leditInt = NULL; rootSrc = tmp; return (LEDIT_CMPL); } else { while(ledSrcM) { if (ledSrcM EQ lesm) { tmp->next = ledSrcM->next; ledit_clear_all (ledSrcM->leditInt); ACI_MFREE (ledSrcM->leditInt); ACI_MFREE (ledSrcM); ledSrcM = NULL; return (LEDIT_CMPL); } tmp = ledSrcM; ledSrcM = ledSrcM->next; } return (LEDIT_FAIL); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_getNewSrcMaintain | +--------------------------------------------------------------------+ PURPOSE : */ static T_LEDIT_SRC_MAINTAIN *ledit_getNewSrcMaintain (T_LEDIT_SRC_MAINTAIN *lesm) { static T_LEDIT ledit_initial = {13, 10, 8, 1, 0x1a}; /* S3 S4 S5 E, smsEnd */ ACI_MALLOC(lesm, (sizeof (T_LEDIT_SRC_MAINTAIN))); if (lesm EQ NULL) { return NULL; } lesm->next = NULL; ACI_MALLOC(lesm->leditInt,(sizeof (T_LEDIT_INTERN))); if (lesm->leditInt EQ NULL) { ACI_MFREE (lesm); lesm = NULL; return NULL; } memset(lesm->leditInt, '\0', sizeof (T_LEDIT_INTERN)); lesm->leditInt->copyIter = 0; lesm->leditInt->srcBuffer = NULL; lesm->leditInt->srcBufIter = 0; lesm->leditInt->smsBuffer = NULL; lesm->leditInt->lineBuffer = NULL; lesm->leditInt->lineBufIter = 0; lesm->leditInt->origBuffer = NULL; lesm->leditInt->origBufIter = 0; lesm->leditInt->execBuffer = NULL; lesm->leditInt->execBufIter = 0; lesm->leditInt->state = ledit_idle; lesm->leditInt->lineHabit = ledit_initial; lesm->leditInt->err.code = LEDIT_ERR_NONE; lesm->leditInt->err.msg = NULL; lesm->leditInt->isStr = FALSE; lesm->leditInt->cmdGetIter = 0; lesm->leditInt->cmdm = NULL; ledit_clear_all(lesm->leditInt); return lesm; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_getSrcM | +--------------------------------------------------------------------+ PURPOSE : */ static T_LEDIT_SRC_MAINTAIN *ledit_getSrcM (UBYTE src_id, const UBYTE *chars, USHORT len) { static BOOL firstCall = 1; T_LEDIT_SRC_MAINTAIN *ledSrcM = NULL; T_LEDIT_SRC_MAINTAIN *tmp = NULL; /* * get the very first AT source maintenance */ if (firstCall) { firstCall = 0; if ((rootSrc = ledit_getNewSrcMaintain (rootSrc)) EQ NULL) { return NULL; } rootSrc->leditInt->src_id = src_id; rootSrc->leditInt->srcBufIterE = 0; rootSrc->leditInt->srcBufIter = 0; rootSrc->leditInt->srcBuffer = chars; rootSrc->leditInt->len = len; return rootSrc; } /* * do we have a maintenance for this src_id ? */ ledSrcM = rootSrc; tmp = rootSrc; while(ledSrcM AND ledSrcM->leditInt->src_id NEQ src_id) { tmp = ledSrcM; ledSrcM = ledSrcM->next; } if (ledSrcM EQ NULL) { /* * No, this AT source called line edit for the very first time */ if ((ledSrcM = ledit_getNewSrcMaintain (ledSrcM)) EQ NULL) { return NULL; } tmp->next = ledSrcM; } ledSrcM->leditInt->src_id = src_id; ledSrcM->leditInt->srcBufIterE = 0; ledSrcM->leditInt->srcBufIter = 0; ledSrcM->leditInt->srcBuffer = chars; ledSrcM->leditInt->len = len; ledSrcM->leditInt->err.msg = NULL; ledSrcM->leditInt->err.code = LEDIT_ERR_NONE; return ledSrcM; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_getSrc | +--------------------------------------------------------------------+ PURPOSE : get an existing source maintenance */ static T_LEDIT_SRC_MAINTAIN *ledit_getSrc (UBYTE src_id) { T_LEDIT_SRC_MAINTAIN *ledSrcM = NULL; ledSrcM = rootSrc; while(ledSrcM AND ledSrcM->leditInt->src_id NEQ src_id) { ledSrcM = ledSrcM->next; } if (ledSrcM EQ NULL) { return NULL; } return ledSrcM; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_check_param | +--------------------------------------------------------------------+ PURPOSE : - */ static T_LEDIT_RSLT ledit_check_param (const UBYTE *chars, USHORT len) { if (len EQ 0 OR chars EQ NULL) { return (LEDIT_FAIL); } if (len > MAX_CMD_LEN) { return (LEDIT_FAIL); } return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_cmd | +--------------------------------------------------------------------+ PURPOSE : - receive char, chars or complete AT-string sent by UART, bluetooth, SAT, ... - run the state machine to build up valid AT commands */ T_LEDIT_RSLT ledit_cmd (UBYTE src_id, const UBYTE *chars, USHORT len) { T_LEDIT_RSLT rv = LEDIT_COLLECT; T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; TRACE_FUNCTION ("ledit_cmd()"); /* * get the maintenance for this AT source or create a new one or die */ if ((lineSrcM = ledit_getSrcM (src_id, chars, len)) EQ NULL) { return (LEDIT_FAIL); } /* * at first check, whether the last cmd line is already processed by ATI * ATI will call then ledit_ctrl(src_id,LEDIT_CTRL_CMPL,NULL) * which reset the state machine */ if (lineSrcM->leditInt->state EQ ledit_run_cmd) { /* * ATI did not confirmed the last cmd line */ lineSrcM->leditInt->err.code = LEDIT_ERR_LastCmdPending; lineSrcM->leditInt->err.msg = ledit_err[LEDIT_ERR_LastCmdPending].msg; return (LEDIT_FAIL); } /* * the caller of ledit_cmd is responsible to echoing the passed chars back * so clear at first the old chars from the last call of ledit_cmd */ ledit_echo_clear(); if (ledit_check_param(chars, len) EQ LEDIT_FAIL) { lineSrcM->leditInt->err.code = LEDIT_ERR_NoValidCommand; lineSrcM->leditInt->err.msg = ledit_err[LEDIT_ERR_NoValidCommand].msg; return (LEDIT_FAIL); } /* * the chars of the raw source cmd line can be parsed now * call state machine and check the return value */ while ((lineSrcM->leditInt->srcBufIter < len) AND ((rv EQ LEDIT_COLLECT) OR (rv EQ LEDIT_IGNORE))) { rv = (*lineSrcM->leditInt->state)(lineSrcM->leditInt); if (rv EQ LEDIT_FAIL) { ledit_clear_all(lineSrcM->leditInt); if (lineSrcM->leditInt->lineHabit.atE) { ledit_echo(lineSrcM->leditInt); } return rv; } } /* * the chars [aAtT] have already been put into g_ledit_echoBuf by these states */ if ((lineSrcM->leditInt->state NEQ ledit_prefix_a) AND(lineSrcM->leditInt->state NEQ ledit_prefix_t)) { /* * but then, put all chars after [tT] into g_ledit_echoBuf */ if (lineSrcM->leditInt->lineHabit.atE) { ledit_echo(lineSrcM->leditInt); } } /* * if ready to execute, state machine will call ledit_run_cmd() * or in case of A/ ledit_repeat() first and then ledit_run_cmd() */ if (lineSrcM->leditInt->state EQ ledit_repeat) { rv = (*lineSrcM->leditInt->state)(lineSrcM->leditInt); if (rv EQ LEDIT_FAIL) { ledit_clear_all(lineSrcM->leditInt); TRACE_EVENT ("ledit_cmd(): ledit_repeat FAILED"); return rv; } } if (lineSrcM->leditInt->state EQ ledit_run_cmd) { rv = (*lineSrcM->leditInt->state)(lineSrcM->leditInt); if (rv EQ LEDIT_FAIL) { ledit_clear_all(lineSrcM->leditInt); if (lineSrcM->leditInt->lineHabit.atE) { ledit_echo(lineSrcM->leditInt); } ledit_echo_clear(); TRACE_EVENT ("ledit_cmd(): ledit_run_cmd FAILED"); return rv; } } TRACE_EVENT_P1 ("ledit_cmd(): returns with %d", rv); return rv; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_idle | +--------------------------------------------------------------------+ PURPOSE : - state 1 of command line parser - start parsing of AT command line with received [aA] - is final state with received '\0' */ static T_LEDIT_RSLT ledit_idle (T_LEDIT_INTERN *leditInt) { char c = leditInt->srcBuffer[leditInt->srcBufIter++]; #ifdef _SIMULATION_ TRACE_FUNCTION ("ledit_idle()"); #endif if(c EQ leditInt->lineHabit.S3) { return (LEDIT_OK); /* simple <CR> will emit an OK */ } switch (c) { case 'a': case 'A': { if (leditInt->lineHabit.atE) { g_ledit_echoBuf[0] = c; } leditInt->state = ledit_prefix_a; return (LEDIT_COLLECT); } default: { TRACE_EVENT_P1("ledit_idle(): ignored character is %d", c); return (LEDIT_IGNORE); } } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_prefix_a | +--------------------------------------------------------------------+ PURPOSE : - state 2 of command line parser */ static void ledit_prefix_help (T_LEDIT_INTERN *leditInt, char c) { if (leditInt->lineHabit.atE) { if ((g_ledit_echoBuf[0] EQ 'a') OR (g_ledit_echoBuf[0] EQ 'A')) { g_ledit_echoBuf[1] = c; } else { g_ledit_echoBuf[0] = c; } } } static T_LEDIT_RSLT ledit_prefix_a (T_LEDIT_INTERN *leditInt) { char c = leditInt->srcBuffer[leditInt->srcBufIter++]; #ifdef _SIMULATION_ TRACE_FUNCTION ("ledit_prefix_a()"); #endif if(c EQ leditInt->lineHabit.S3) { return (LEDIT_FAIL); /* A<CR> (or what has been set for S3) makes no sense */ } switch (c) { case SLASH: /* '/' will not be echoed */ { leditInt->state = ledit_repeat; return (LEDIT_EXCT); } case 't': case 'T': { ledit_prefix_help (leditInt, c); leditInt->srcBufIterE = leditInt->srcBufIter; leditInt->state = ledit_prefix_t; return (LEDIT_COLLECT); } default: { if(c EQ leditInt->lineHabit.S5) /* backspace */ { ledit_prefix_help (leditInt, c); leditInt->state = ledit_idle; return (LEDIT_COLLECT); /* A<S5> go back */ } return (LEDIT_IGNORE); } } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_prefix_t | +--------------------------------------------------------------------+ PURPOSE : - state 3 of command line parser */ static T_LEDIT_RSLT ledit_prefix_t (T_LEDIT_INTERN *leditInt) { char c = leditInt->srcBuffer[leditInt->srcBufIter++]; #ifdef _SIMULATION_ TRACE_FUNCTION ("ledit_prefix_t()"); #endif if(c EQ leditInt->lineHabit.S3) { if (leditInt->lineHabit.atE) { g_ledit_echoBuf[2] = c; } return (LEDIT_OK); /* AT<CR> will emit an OK */ } if(c EQ leditInt->lineHabit.S5) /* backspace */ { ledit_prefix_help (leditInt, c); leditInt->state = ledit_prefix_a; return (LEDIT_COLLECT); /* AT<S5> go back */ } leditInt->srcBufIter--; /* collect needs the first character after "AT", as well */ leditInt->state = ledit_collect; return (LEDIT_COLLECT); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_collect | +--------------------------------------------------------------------+ PURPOSE : - state 4 of command line parser */ static T_LEDIT_RSLT ledit_repeat (T_LEDIT_INTERN *leditInt) { TRACE_FUNCTION ("ledit_repeat()"); ++(leditInt->srcBufIter); /* to reach the end of cmd line */ if (leditInt->execBuffer AND leditInt->execBuffer[0]) /* is there anything to repeat? */ { if (leditInt->lineBuffer) /* discard current "A/" */ { ACI_MFREE(leditInt->lineBuffer); leditInt->lineBuffer = NULL; } if (leditInt->origBuffer) /* discard current "A/" */ { ACI_MFREE(leditInt->origBuffer); leditInt->origBuffer = NULL; } ledit_echo_clear (); leditInt->state = ledit_run_cmd; return (LEDIT_EXCT); } return (LEDIT_FAIL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_collect | +--------------------------------------------------------------------+ PURPOSE : - state 4 of command line parser */ static T_LEDIT_RSLT ledit_collect (T_LEDIT_INTERN *leditInt) { int i = 0; char c = leditInt->srcBuffer[leditInt->srcBufIter++]; USHORT len = 0; #ifdef _SIMULATION_ TRACE_FUNCTION ("ledit_collect()"); #endif if (leditInt->lineBuffer EQ NULL) { ledit_clear_lineBuf(leditInt); } while (i < leditInt->len) { if (leditInt->copyIter+2 EQ MAX_CMD_LEN) /* some precheck, +2 for "AT" */ { if (c EQ leditInt->lineHabit.S3) ; else if (c EQ leditInt->lineHabit.S5) ; else { ledit_prefix_help(leditInt, '\a'); return (LEDIT_IGNORE); /* loop on all other commands if we would exceed the string */ } } if(c EQ leditInt->lineHabit.S3) { leditInt->origBuffer[leditInt->origBufIter] = '\0'; /* terminate cmd string */ leditInt->lineBuffer[leditInt->copyIter] = '\0'; /* terminate cmd string */ if (leditInt->isStr NEQ FALSE) { /* * a string parameter did not end with " * e.g: at+cpbw=1,"+491721212",145,"D2 Kundenbetreuung <--- missing closing " */ leditInt->err.code = LEDIT_ERR_NoValidCommand; leditInt->err.msg = ledit_err[LEDIT_ERR_NoValidCommand].msg; return (LEDIT_FAIL); } /* * for possibly repeating backup the current cmd line */ ledit_backup(leditInt); leditInt->state = ledit_run_cmd; leditInt->origBufIter = 0; leditInt->copyIter = 0; return (LEDIT_EXCT); } else if(c EQ leditInt->lineHabit.S4) { ; /* ignore LF */ } else if(c EQ leditInt->lineHabit.S5) { len = leditInt->origBufIter; if ( leditInt->origBuffer[--(len)] EQ '"' ) /* Checks if the character to be deleted is '"' */ { leditInt->isStr = !(leditInt->isStr); /* Toggles the variable "isStr" when '"" got deleted */ } if (leditInt->copyIter > 0) { --(leditInt->copyIter); /* delete last character in cmd buffer by setting iterator i one step back */ } if (leditInt->origBufIter > 0) { --(leditInt->origBufIter); /* delete last character in cmd buffer by setting iterator i one step back */ } if (leditInt->copyIter EQ 0) /* reached first character after "AT" */ { leditInt->state = ledit_prefix_t; /* Fall back into state 't' */ ledit_prefix_help (leditInt, c); leditInt->origBuffer[leditInt->origBufIter] = '\0'; /* Terminate Command !!! ACI-FIX-12036 AV2 */ leditInt->lineBuffer[leditInt->copyIter] = '\0'; /* Terminate Command !!! ACI-FIX-12036 AV2 */ return (LEDIT_COLLECT); /* AT<S5> go back */ } } else { switch (c) { case WS: { if (leditInt->isStr) /* don't modify anything within string e.g.: "BlAh 1234" */ { leditInt->origBuffer[leditInt->origBufIter++] = c; leditInt->lineBuffer[leditInt->copyIter++] = c; break; } break; /* just to eat up white space */ } default: { if ((c > 0x20) AND (!(c & 0x80))) /* only printable chars with 7 bits */ { if (c EQ '"') { leditInt->isStr = !(leditInt->isStr); } leditInt->origBuffer[leditInt->origBufIter++] = c; /* copy character to cmd buffer */ if (!(leditInt->isStr) AND c >= 'a' AND c <= 'z') { c -= 0x20; /* to upper */ } leditInt->lineBuffer[leditInt->copyIter++] = c; /* copy character to cmd buffer */ } } } } c = leditInt->srcBuffer[leditInt->srcBufIter++]; ++i; if (leditInt->srcBufIter > leditInt->len) { break; } } leditInt->origBuffer[leditInt->origBufIter] = '\0'; leditInt->lineBuffer[leditInt->copyIter] = '\0'; /* Terminate Command !!! ACI-FIX-12036 AV2 */ return (LEDIT_COLLECT); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_run_cmd | +--------------------------------------------------------------------+ PURPOSE : - state 5 of command line parser */ static T_LEDIT_RSLT ledit_run_cmd (T_LEDIT_INTERN *leditInt) { TRACE_FUNCTION("ledit_run_cmd()"); leditInt->cmdIndex = 1; leditInt->cmdGetIter = 1; ledit_free_cmd(leditInt); /* clear all (=previous) commands */ leditInt->cmdm = NULL; return (ledit_split (leditInt)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_clear_cmdBuf | +--------------------------------------------------------------------+ PURPOSE : - */ static T_LEDIT_RSLT ledit_clear_lineBuf (T_LEDIT_INTERN *leditInt) { if (leditInt->lineBuffer EQ NULL) { ACI_MALLOC(leditInt->lineBuffer,((MAX_CMD_LEN+1) * sizeof (char))); } if (leditInt->lineBuffer EQ NULL) return (LEDIT_FAIL); memset(leditInt->lineBuffer, '\0',(MAX_CMD_LEN+1) * sizeof (char)); if (leditInt->origBuffer EQ NULL) { ACI_MALLOC(leditInt->origBuffer,((MAX_CMD_LEN+1) * sizeof (char))); } if (leditInt->origBuffer EQ NULL) return (LEDIT_FAIL); memset(leditInt->origBuffer, '\0',(MAX_CMD_LEN+1) * sizeof (char)); return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_clear_all | +--------------------------------------------------------------------+ PURPOSE : - */ static T_LEDIT_RSLT ledit_clear_all (T_LEDIT_INTERN *leditInt) { ledit_free_cmd(leditInt); /* maintained by ledit_split */ leditInt->cmdm = NULL; if (leditInt->smsBuffer) { ACI_MFREE (leditInt->smsBuffer); leditInt->smsBuffer = NULL; } if (leditInt->lineBuffer) { ACI_MFREE (leditInt->lineBuffer); leditInt->lineBuffer = NULL; } if (leditInt->origBuffer) { ACI_MFREE (leditInt->origBuffer); leditInt->origBuffer = NULL; } leditInt->txtChunk = 0; leditInt->copyIter = 0; leditInt->origBufIter = 0; leditInt->lineBufIter = 0; leditInt->execBufIter = 0; leditInt->srcBufIter = 0; leditInt->cmdGetIter = 0; leditInt->cmdIndex = 0; leditInt->isStr = FALSE; leditInt->state = ledit_idle; /* reset to default state */ return (LEDIT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : LINE_EDIT_LIB | | STATE : code ROUTINE : ledit_trace_line | +--------------------------------------------------------------------+ PURPOSE : prepare a text buffer for tracing of an AT cmd line. a cmd line is ready for tracing after receiving of the termination character<S3> and removing of all non necessary characters, e.g.: white spaces and the the characters in the mAlberTO phenomenon " m a lb er t o<S3>" is interpreted as ATO ! the characters can come in as single chars, chunk of chars or as complete line. the actual trace takes place with trace_cmd_line() */ T_LEDIT_RSLT ledit_trace_line (UBYTE src_id, char *txt) { T_LEDIT_SRC_MAINTAIN *lineSrcM = NULL; /* * get the maintenance for this AT source */ if ((lineSrcM = ledit_getSrcM (src_id, NULL, 0)) EQ NULL) { return (LEDIT_FAIL); } if (lineSrcM->leditInt->execBuffer) { strncpy (txt, lineSrcM->leditInt->execBuffer, 77); /* limit to 77 chars, 2 are used for "AT" */ txt[77] = '\0'; return (LEDIT_CMPL); } else { return (LEDIT_FAIL); } }